openwrtv4/target/linux/ar71xx/patches-4.9/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
Hauke Mehrtens 7bbf4117c6 ar71xx: Add kernel 4.9 support
This add support for kernel 4.9 to the ar71xx target.
It was compile tested with the generic, NAND and mikrotik subtarget.
Multiple members of the community tested it on their boards and did not
report any major problem so far.

Especially the NAND part received some changes to adapt to the new
kernel APIs. The serial driver hack used for the Arduino Yun was not
ported because the kernel changed there a lot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 22:32:39 +02:00

61 lines
1.7 KiB
Diff

From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Tue, 16 Jun 2015 13:15:08 +0200
Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
It seems some phys have some maximum timings for accessing the MDIO line,
resulting in bit errors under cpu stress. Prevent this from happening by
disabling interrupts when sending commands.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
drivers/net/phy/mdio-bitbang.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/net/phy/mdio-bitbang.c
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -17,6 +17,7 @@
* kind, whether express or implied.
*/
+#include <linux/irqflags.h>
#include <linux/module.h>
#include <linux/mdio-bitbang.h>
#include <linux/types.h>
@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b
{
struct mdiobb_ctrl *ctrl = bus->priv;
int ret;
+ unsigned long flags;
+ local_irq_save(flags);
if (reg & MII_ADDR_C45) {
reg = mdiobb_cmd_addr(ctrl, phy, reg);
mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b
ret = mdiobb_get_num(ctrl, 16);
mdiobb_get_bit(ctrl);
+ local_irq_restore(flags);
+
return ret;
}
static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
{
struct mdiobb_ctrl *ctrl = bus->priv;
+ unsigned long flags;
+ local_irq_save(flags);
if (reg & MII_ADDR_C45) {
reg = mdiobb_cmd_addr(ctrl, phy, reg);
mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus *
ctrl->ops->set_mdio_dir(ctrl, 0);
mdiobb_get_bit(ctrl);
+ local_irq_restore(flags);
+
return 0;
}