openwrtv4/target/linux/ramips/dts/WRH-300CR.dts
Álvaro Fernández Rojas 021c893658 ramips: fix size-cells on spi nodes
size-cells should be 0 in order to avoid dummy values in reg properties.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-18 16:57:39 +02:00

125 lines
1.7 KiB
Text

/dts-v1/;
#include "mt7620n.dtsi"
/ {
compatible = "elecom,wrh-300cr", "ralink,mt7620n-soc";
model = "ELECOM WRH-300CR";
gpio-leds {
compatible = "gpio-leds";
wps {
label = "wrh-300cr:green:wps";
gpios = <&gpio2 0 1>;
};
ethernet {
label = "wrh-300cr:green:ethernet";
gpios = <&gpio2 3 1>;
};
wlan {
label = "wrh-300cr:green:wlan";
gpios = <&gpio3 0 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 2 1>;
linux,code = <0x211>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l12805d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "recover";
reg = <0x50000 0x1c0000>;
read-only;
};
partition@210000 {
label = "firmware";
reg = <0x210000 0xdf0000>;
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x2e>;
mediatek,portmap = "llllw";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "ephy", "wled";
ralink,function = "gpio";
};
};
};