openwrtv4/target/linux/lantiq/base-files/etc/board.d/02_network
Hauke Mehrtens 13b8b8c2e7 lantiq: add support for TP-Link VR200v
This adds basic support for TP-Link VR200v.
Currently the following parts are not working: FXO, Voice, DECT, WIFI (both)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48328
2016-01-18 20:40:03 +00:00

160 lines
3.4 KiB
Bash
Executable file

#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
. /lib/functions/lantiq.sh
board_config_update
vpi=1
vci=32
annex="a"
encaps="llc"
payload="bridged"
lan_mac=""
wan_mac=""
interface_wan=""
board=$(lantiq_board_name)
case "$board" in
# adm6996
ARV4510PW)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
;;
ARV4520PW)
ucidef_add_switch "switch0" \
"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
;;
ACMP252|GIGASX76X)
ucidef_add_switch "switch0" \
"4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
;;
# ar8316
ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
;;
# rtl8306g
ARV7519PW)
lan_mac=$(mtd_get_mac_binary board_config 22)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
;;
WBMR)
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
;;
VG3503J)
ucidef_set_interface_lan 'eth0'
;;
DGN3500*)
ucidef_add_switch "switch0" \
"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
;;
GR7000)
ucidef_set_interface_wan "eth0"
;;
H201L)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
;;
#rtl8306g
P2601HNFX)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
;;
P2812HNUF*)
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
;;
TDW8970|TDW8980)
lan_mac=$(mtd_get_mac_binary boardconfig 61696)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
;;
VR200v)
lan_mac=$(mtd_get_mac_binary romfile 61696)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
;;
ARV7519RW22)
lan_mac=$(mtd_get_mac_binary boardconfig 22)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
;;
BTHOMEHUBV2B|BTHOMEHUBV3A)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0'
;;
BTHOMEHUBV5A)
lan_mac=$(mtd_get_mac_binary caldata 4364)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "6t@eth0"
;;
VGV7519)
lan_mac=$(mtd_get_mac_binary board_config 22)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0'
;;
VGV7510KW22)
lan_mac=$(mtd_get_mac_binary board_config 22)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
;;
esac
if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
fi
if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
interface_wan="ptm0"
ucidef_add_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm"
else
interface_wan="nas0"
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
fi
ucidef_set_interface_wan "$interface_wan" "pppoe"
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan "$lan_mac"
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan "$wan_mac"
board_config_flush
exit 0