Jonas Gorski c674c874b7 ag71xx: close a race between the phy state machine and link state ... A fast stop/start cycle could leave the ag71xx interrupts and tx engine disabled when using a phy driver with a fixed link and the start/stop happens between two phy state machine polls. Prevent this by always forcing the link down on stop regardless of phy state and having a phy connected. SVN-Revision: 28380		2011-10-08 11:37:14 +00:00
..
ag71xx.h	ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins)	2011-09-11 17:44:12 +00:00
ag71xx_ar7240.c	ar71xx: reinitialize global switch settings after reset on ar7240	2011-07-20 14:39:47 +00:00
ag71xx_ar8216.c	ar71xx: fix up alignment handling	2010-04-15 23:31:17 +00:00
ag71xx_debugfs.c	ar71xx: ag71xx: prepare to make ring sizes configurable	2011-05-31 22:53:09 +00:00
ag71xx_ethtool.c	ar71xx: ag71xx: make ring sizes configurable via ethtool	2011-05-31 22:53:10 +00:00
ag71xx_main.c	ar71xx: add some code to detect DMA stuck conditions on ar7240	2011-08-13 22:30:14 +00:00
ag71xx_mdio.c	ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus behind the switch instead	2011-04-02 00:47:29 +00:00
ag71xx_phy.c	ag71xx: close a race between the phy state machine and link state	2011-10-08 11:37:14 +00:00
Kconfig	wrt400n: lan ports don't need the ar8216 workaround	2010-03-26 19:09:11 +00:00
Makefile	ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563	2010-08-16 19:21:57 +00:00