KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c
Mathias Kresin 287b7aa583 ramips: drop obsolete sd card driver code 
The pinmux for all SoCs using this driver is now set via the pinmux. It
makes this code obsolete.

Some of the code targeting the mt76x8 SoCs is still required. The sd
card pins share the pads with the EPHY. These pads need to be switched
to digital mode if the pins are used for sd cards.

The eMMC 8-bit mode has to be enabled via pinmux instead of a kernel
option. The uart2 group need to be set to function "sdxc d5 d4", pwm1
to "sdxc d6" and pwm0 to "sdxc d7" to do so. It can't be done by as
part of a default pinmux, as it would break the normal operation of
uart2.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-09-06 21:35:53 +02:00

2461 lines
68 KiB
C
Raw Blame History

/* Copyright Statement:
*
* This software/firmware and related documentation ("MediaTek Software") are
* protected under relevant copyright laws. The information contained herein
* is confidential and proprietary to MediaTek Inc. and/or its licensors.
* Without the prior written permission of MediaTek inc. and/or its licensors,
* any reproduction, modification, use or disclosure of MediaTek Software,
* and information contained herein, in whole or in part, shall be strictly prohibited.
*
* MediaTek Inc. (C) 2010. All rights reserved.
*
* BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
* THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
* CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
* SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
* STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
* CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
* The following software/firmware and/or related documentation ("MediaTek Software")
* have been modified by MediaTek Inc. All revisions are subject to any receiver's
* applicable license agreements with MediaTek Inc.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sd.h>
#include <linux/mmc/sdio.h>
#include <asm/mach-ralink/ralink_regs.h>
#include "board.h"
#include "dbg.h"
#include "mt6575_sd.h"
//#define IRQ_SDC 14 //MT7620 /*FIXME*/
#ifdef CONFIG_SOC_MT7621
#define RALINK_SYSCTL_BASE 0xbe000000
#define RALINK_MSDC_BASE 0xbe130000
#else
#define RALINK_SYSCTL_BASE 0xb0000000
#define RALINK_MSDC_BASE 0xb0130000
#endif
#define IRQ_SDC 22 /*FIXME*/
#define DRV_NAME "mtk-sd"
#if defined(CONFIG_SOC_MT7620)
#define HOST_MAX_MCLK (48000000) /* +/- by chhung */
#elif defined(CONFIG_SOC_MT7621)
#define HOST_MAX_MCLK (50000000) /* +/- by chhung */
#endif
#define HOST_MIN_MCLK (260000)
#define HOST_MAX_BLKSZ (2048)
#define MSDC_OCR_AVAIL (MMC_VDD_28_29 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33)
#define GPIO_PULL_DOWN (0)
#define GPIO_PULL_UP (1)
#if 0 /* --- by chhung */
#define MSDC_CLKSRC_REG (0xf100000C)
#define PDN_REG (0xF1000010)
#endif /* end of --- */
#define DEFAULT_DEBOUNCE (8) /* 8 cycles */
#define DEFAULT_DTOC (40) /* data timeout counter. 65536x40 sclk. */
#define CMD_TIMEOUT (HZ / 10) /* 100ms */
#define DAT_TIMEOUT (HZ / 2 * 5) /* 500ms x5 */
#define MAX_DMA_CNT (64 * 1024 - 512) /* a single transaction for WIFI may be 50K*/
#define MAX_GPD_NUM (1 + 1) /* one null gpd */
#define MAX_BD_NUM (1024)
#define MAX_BD_PER_GPD (MAX_BD_NUM)
#define MAX_HW_SGMTS (MAX_BD_NUM)
#define MAX_PHY_SGMTS (MAX_BD_NUM)
#define MAX_SGMT_SZ (MAX_DMA_CNT)
#define MAX_REQ_SZ (MAX_SGMT_SZ * 8)
static int cd_active_low = 1;
//=================================
#define PERI_MSDC0_PDN (15)
//#define PERI_MSDC1_PDN (16)
//#define PERI_MSDC2_PDN (17)
//#define PERI_MSDC3_PDN (18)
#if 0 /* --- by chhung */
/* gate means clock power down */
static int g_clk_gate = 0;
#define msdc_gate_clock(id) \
do { \
g_clk_gate &= ~(1 << ((id) + PERI_MSDC0_PDN)); \
} while (0)
/* not like power down register. 1 means clock on. */
#define msdc_ungate_clock(id) \
do { \
g_clk_gate |= 1 << ((id) + PERI_MSDC0_PDN); \
} while (0)
// do we need sync object or not
void msdc_clk_status(int *status)
{
*status = g_clk_gate;
}
#endif /* end of --- */
/* +++ by chhung */
struct msdc_hw msdc0_hw = {
.clk_src = 0,
.flags = MSDC_CD_PIN_EN | MSDC_REMOVABLE,
// .flags = MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE,
};
/* end of +++ */
static int msdc_rsp[] = {
0, /* RESP_NONE */
1, /* RESP_R1 */
2, /* RESP_R2 */
3, /* RESP_R3 */
4, /* RESP_R4 */
1, /* RESP_R5 */
1, /* RESP_R6 */
1, /* RESP_R7 */
7, /* RESP_R1b */
};
#define msdc_txfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16)
#define msdc_rxfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT) >> 0)
#define msdc_fifo_write32(v) sdr_write32(MSDC_TXDATA, (v))
#define msdc_fifo_write8(v) sdr_write8(MSDC_TXDATA, (v))
#define msdc_fifo_read32() sdr_read32(MSDC_RXDATA)
#define msdc_fifo_read8() sdr_read8(MSDC_RXDATA)
#define msdc_dma_on() sdr_clr_bits(MSDC_CFG, MSDC_CFG_PIO)
#define msdc_retry(expr, retry, cnt) \
do { \
int backup = cnt; \
while (retry) { \
if (!(expr)) \
break; \
if (cnt-- == 0) { \
retry--; mdelay(1); cnt = backup; \
} \
} \
WARN_ON(retry == 0); \
} while (0)
static void msdc_reset_hw(struct msdc_host *host)
{
void __iomem *base = host->base;
sdr_set_bits(MSDC_CFG, MSDC_CFG_RST);
while (sdr_read32(MSDC_CFG) & MSDC_CFG_RST)
cpu_relax();
}
#define msdc_clr_int() \
do { \
volatile u32 val = sdr_read32(MSDC_INT); \
sdr_write32(MSDC_INT, val); \
} while (0)
#define msdc_clr_fifo() \
do { \
int retry = 3, cnt = 1000; \
sdr_set_bits(MSDC_FIFOCS, MSDC_FIFOCS_CLR); \
msdc_retry(sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \
} while (0)
#define msdc_irq_save(val) \
do { \
val = sdr_read32(MSDC_INTEN); \
sdr_clr_bits(MSDC_INTEN, val); \
} while (0)
#define msdc_irq_restore(val) \
do { \
sdr_set_bits(MSDC_INTEN, val); \
} while (0)
/* clock source for host: global */
#if defined(CONFIG_SOC_MT7620)
static u32 hclks[] = {48000000}; /* +/- by chhung */
#elif defined(CONFIG_SOC_MT7621)
static u32 hclks[] = {50000000}; /* +/- by chhung */
#endif
//============================================
// the power for msdc host controller: global
// always keep the VMC on.
//============================================
#define msdc_vcore_on(host) \
do { \
INIT_MSG("[+]VMC ref. count<%d>", ++host->pwr_ref); \
(void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \
} while (0)
#define msdc_vcore_off(host) \
do { \
INIT_MSG("[-]VMC ref. count<%d>", --host->pwr_ref); \
(void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \
} while (0)
//====================================
// the vdd output for card: global
// always keep the VMCH on.
//====================================
#define msdc_vdd_on(host) \
do { \
(void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \
} while (0)
#define msdc_vdd_off(host) \
do { \
(void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
} while (0)
#define sdc_is_busy() (sdr_read32(SDC_STS) & SDC_STS_SDCBUSY)
#define sdc_is_cmd_busy() (sdr_read32(SDC_STS) & SDC_STS_CMDBUSY)
#define sdc_send_cmd(cmd, arg) \
do { \
sdr_write32(SDC_ARG, (arg)); \
sdr_write32(SDC_CMD, (cmd)); \
} while (0)
// can modify to read h/w register.
//#define is_card_present(h) ((sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1);
#define is_card_present(h) (((struct msdc_host *)(h))->card_inserted)
/* +++ by chhung */
#ifndef __ASSEMBLY__
#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
#else
#define PHYSADDR(a) ((a) & 0x1fffffff)
#endif
/* end of +++ */
static unsigned int msdc_do_command(struct msdc_host *host,
struct mmc_command *cmd,
int tune,
unsigned long timeout);
static int msdc_tune_cmdrsp(struct msdc_host *host, struct mmc_command *cmd);
#ifdef MT6575_SD_DEBUG
static void msdc_dump_card_status(struct msdc_host *host, u32 status)
{
/* N_MSG is currently a no-op */
#if 0
static char *state[] = {
"Idle", /* 0 */
"Ready", /* 1 */
"Ident", /* 2 */
"Stby", /* 3 */
"Tran", /* 4 */
"Data", /* 5 */
"Rcv", /* 6 */
"Prg", /* 7 */
"Dis", /* 8 */
"Reserved", /* 9 */
"Reserved", /* 10 */
"Reserved", /* 11 */
"Reserved", /* 12 */
"Reserved", /* 13 */
"Reserved", /* 14 */
"I/O mode", /* 15 */
};
#endif
if (status & R1_OUT_OF_RANGE)
N_MSG(RSP, "[CARD_STATUS] Out of Range");
if (status & R1_ADDRESS_ERROR)
N_MSG(RSP, "[CARD_STATUS] Address Error");
if (status & R1_BLOCK_LEN_ERROR)
N_MSG(RSP, "[CARD_STATUS] Block Len Error");
if (status & R1_ERASE_SEQ_ERROR)
N_MSG(RSP, "[CARD_STATUS] Erase Seq Error");
if (status & R1_ERASE_PARAM)
N_MSG(RSP, "[CARD_STATUS] Erase Param");
if (status & R1_WP_VIOLATION)
N_MSG(RSP, "[CARD_STATUS] WP Violation");
if (status & R1_CARD_IS_LOCKED)
N_MSG(RSP, "[CARD_STATUS] Card is Locked");
if (status & R1_LOCK_UNLOCK_FAILED)
N_MSG(RSP, "[CARD_STATUS] Lock/Unlock Failed");
if (status & R1_COM_CRC_ERROR)
N_MSG(RSP, "[CARD_STATUS] Command CRC Error");
if (status & R1_ILLEGAL_COMMAND)
N_MSG(RSP, "[CARD_STATUS] Illegal Command");
if (status & R1_CARD_ECC_FAILED)
N_MSG(RSP, "[CARD_STATUS] Card ECC Failed");
if (status & R1_CC_ERROR)
N_MSG(RSP, "[CARD_STATUS] CC Error");
if (status & R1_ERROR)
N_MSG(RSP, "[CARD_STATUS] Error");
if (status & R1_UNDERRUN)
N_MSG(RSP, "[CARD_STATUS] Underrun");
if (status & R1_OVERRUN)
N_MSG(RSP, "[CARD_STATUS] Overrun");
if (status & R1_CID_CSD_OVERWRITE)
N_MSG(RSP, "[CARD_STATUS] CID/CSD Overwrite");
if (status & R1_WP_ERASE_SKIP)
N_MSG(RSP, "[CARD_STATUS] WP Eraser Skip");
if (status & R1_CARD_ECC_DISABLED)
N_MSG(RSP, "[CARD_STATUS] Card ECC Disabled");
if (status & R1_ERASE_RESET)
N_MSG(RSP, "[CARD_STATUS] Erase Reset");
if (status & R1_READY_FOR_DATA)
N_MSG(RSP, "[CARD_STATUS] Ready for Data");
if (status & R1_SWITCH_ERROR)
N_MSG(RSP, "[CARD_STATUS] Switch error");
if (status & R1_APP_CMD)
N_MSG(RSP, "[CARD_STATUS] App Command");
N_MSG(RSP, "[CARD_STATUS] '%s' State", state[R1_CURRENT_STATE(status)]);
}
static void msdc_dump_ocr_reg(struct msdc_host *host, u32 resp)
{
if (resp & (1 << 7))
N_MSG(RSP, "[OCR] Low Voltage Range");
if (resp & (1 << 15))
N_MSG(RSP, "[OCR] 2.7-2.8 volt");
if (resp & (1 << 16))
N_MSG(RSP, "[OCR] 2.8-2.9 volt");
if (resp & (1 << 17))
N_MSG(RSP, "[OCR] 2.9-3.0 volt");
if (resp & (1 << 18))
N_MSG(RSP, "[OCR] 3.0-3.1 volt");
if (resp & (1 << 19))
N_MSG(RSP, "[OCR] 3.1-3.2 volt");
if (resp & (1 << 20))
N_MSG(RSP, "[OCR] 3.2-3.3 volt");
if (resp & (1 << 21))
N_MSG(RSP, "[OCR] 3.3-3.4 volt");
if (resp & (1 << 22))
N_MSG(RSP, "[OCR] 3.4-3.5 volt");
if (resp & (1 << 23))
N_MSG(RSP, "[OCR] 3.5-3.6 volt");
if (resp & (1 << 24))
N_MSG(RSP, "[OCR] Switching to 1.8V Accepted (S18A)");
if (resp & (1 << 30))
N_MSG(RSP, "[OCR] Card Capacity Status (CCS)");
if (resp & (1 << 31))
N_MSG(RSP, "[OCR] Card Power Up Status (Idle)");
else
N_MSG(RSP, "[OCR] Card Power Up Status (Busy)");
}
static void msdc_dump_rca_resp(struct msdc_host *host, u32 resp)
{
u32 status = (((resp >> 15) & 0x1) << 23) |
(((resp >> 14) & 0x1) << 22) |
(((resp >> 13) & 0x1) << 19) |
(resp & 0x1fff);
N_MSG(RSP, "[RCA] 0x%.4x", resp >> 16);
msdc_dump_card_status(host, status);
}
static void msdc_dump_io_resp(struct msdc_host *host, u32 resp)
{
u32 flags = (resp >> 8) & 0xFF;
#if 0
char *state[] = {"DIS", "CMD", "TRN", "RFU"};
#endif
if (flags & (1 << 7))
N_MSG(RSP, "[IO] COM_CRC_ERR");
if (flags & (1 << 6))
N_MSG(RSP, "[IO] Illgal command");
if (flags & (1 << 3))
N_MSG(RSP, "[IO] Error");
if (flags & (1 << 2))
N_MSG(RSP, "[IO] RFU");
if (flags & (1 << 1))
N_MSG(RSP, "[IO] Function number error");
if (flags & (1 << 0))
N_MSG(RSP, "[IO] Out of range");
N_MSG(RSP, "[IO] State: %s, Data:0x%x", state[(resp >> 12) & 0x3], resp & 0xFF);
}
#endif
static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
{
void __iomem *base = host->base;
u32 timeout, clk_ns;
host->timeout_ns = ns;
host->timeout_clks = clks;
clk_ns = 1000000000UL / host->sclk;
timeout = ns / clk_ns + clks;
timeout = timeout >> 16; /* in 65536 sclk cycle unit */
timeout = timeout > 1 ? timeout - 1 : 0;
timeout = timeout > 255 ? 255 : timeout;
sdr_set_field(SDC_CFG, SDC_CFG_DTOC, timeout);
N_MSG(OPS, "Set read data timeout: %dns %dclks -> %d x 65536 cycles",
ns, clks, timeout + 1);
}
static void msdc_tasklet_card(struct work_struct *work)
{
struct msdc_host *host = (struct msdc_host *)container_of(work,
struct msdc_host, card_delaywork.work);
void __iomem *base = host->base;
u32 inserted;
u32 status = 0;
//u32 change = 0;
spin_lock(&host->lock);
status = sdr_read32(MSDC_PS);
if (cd_active_low)
inserted = (status & MSDC_PS_CDSTS) ? 0 : 1;
else
inserted = (status & MSDC_PS_CDSTS) ? 1 : 0;
#if 0
change = host->card_inserted ^ inserted;
host->card_inserted = inserted;
if (change && !host->suspend) {
if (inserted)
host->mmc->f_max = HOST_MAX_MCLK; // work around
mmc_detect_change(host->mmc, msecs_to_jiffies(20));
}
#else /* Make sure: handle the last interrupt */
host->card_inserted = inserted;
if (!host->suspend) {
host->mmc->f_max = HOST_MAX_MCLK;
mmc_detect_change(host->mmc, msecs_to_jiffies(20));
}
IRQ_MSG("card found<%s>", inserted ? "inserted" : "removed");
#endif
spin_unlock(&host->lock);
}
#if 0 /* --- by chhung */
/* For E2 only */
static u8 clk_src_bit[4] = {
0, 3, 5, 7
};
static void msdc_select_clksrc(struct msdc_host *host, unsigned char clksrc)
{
u32 val;
void __iomem *base = host->base;
BUG_ON(clksrc > 3);
INIT_MSG("set clock source to <%d>", clksrc);
val = sdr_read32(MSDC_CLKSRC_REG);
if (sdr_read32(MSDC_ECO_VER) >= 4) {
val &= ~(0x3 << clk_src_bit[host->id]);
val |= clksrc << clk_src_bit[host->id];
} else {
val &= ~0x3; val |= clksrc;
}
sdr_write32(MSDC_CLKSRC_REG, val);
host->hclk = hclks[clksrc];
host->hw->clk_src = clksrc;
}
#endif /* end of --- */
static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
{
//struct msdc_hw *hw = host->hw;
void __iomem *base = host->base;
u32 mode;
u32 flags;
u32 div;
u32 sclk;
u32 hclk = host->hclk;
//u8 clksrc = hw->clk_src;
if (!hz) { // set mmc system clock to 0 ?
//ERR_MSG("set mclk to 0!!!");
msdc_reset_hw(host);
return;
}
msdc_irq_save(flags);
if (ddr) {
mode = 0x2; /* ddr mode and use divisor */
if (hz >= (hclk >> 2)) {
div = 1; /* mean div = 1/4 */
sclk = hclk >> 2; /* sclk = clk / 4 */
} else {
div = (hclk + ((hz << 2) - 1)) / (hz << 2);
sclk = (hclk >> 2) / div;
}
} else if (hz >= hclk) { /* bug fix */
mode = 0x1; /* no divisor and divisor is ignored */
div = 0;
sclk = hclk;
} else {
mode = 0x0; /* use divisor */
if (hz >= (hclk >> 1)) {
div = 0; /* mean div = 1/2 */
sclk = hclk >> 1; /* sclk = clk / 2 */
} else {
div = (hclk + ((hz << 2) - 1)) / (hz << 2);
sclk = (hclk >> 2) / div;
}
}
/* set clock mode and divisor */
sdr_set_field(MSDC_CFG, MSDC_CFG_CKMOD, mode);
sdr_set_field(MSDC_CFG, MSDC_CFG_CKDIV, div);
/* wait clock stable */
while (!(sdr_read32(MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
host->sclk = sclk;
host->mclk = hz;
msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); // need?
INIT_MSG("================");
INIT_MSG("!!! Set<%dKHz> Source<%dKHz> -> sclk<%dKHz>", hz / 1000, hclk / 1000, sclk / 1000);
INIT_MSG("================");
msdc_irq_restore(flags);
}
/* Fix me. when need to abort */
static void msdc_abort_data(struct msdc_host *host)
{
void __iomem *base = host->base;
struct mmc_command *stop = host->mrq->stop;
ERR_MSG("Need to Abort.");
msdc_reset_hw(host);
msdc_clr_fifo();
msdc_clr_int();
// need to check FIFO count 0 ?
if (stop) { /* try to stop, but may not success */
ERR_MSG("stop when abort CMD<%d>", stop->opcode);
(void)msdc_do_command(host, stop, 0, CMD_TIMEOUT);
}
//if (host->mclk >= 25000000) {
// msdc_set_mclk(host, 0, host->mclk >> 1);
//}
}
#if 0 /* --- by chhung */
static void msdc_pin_config(struct msdc_host *host, int mode)
{
struct msdc_hw *hw = host->hw;
void __iomem *base = host->base;
int pull = (mode == MSDC_PIN_PULL_UP) ? GPIO_PULL_UP : GPIO_PULL_DOWN;
/* Config WP pin */
if (hw->flags & MSDC_WP_PIN_EN) {
if (hw->config_gpio_pin) /* NULL */
hw->config_gpio_pin(MSDC_WP_PIN, pull);
}
switch (mode) {
case MSDC_PIN_PULL_UP:
//sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 1); /* Check & FIXME */
//sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 0); /* Check & FIXME */
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 1);
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 0);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 1);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 0);
break;
case MSDC_PIN_PULL_DOWN:
//sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 0); /* Check & FIXME */
//sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 1); /* Check & FIXME */
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 0);
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 1);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 0);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 1);
break;
case MSDC_PIN_PULL_NONE:
default:
//sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 0); /* Check & FIXME */
//sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 0); /* Check & FIXME */
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 0);
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 0);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 0);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 0);
break;
}
N_MSG(CFG, "Pins mode(%d), down(%d), up(%d)",
mode, MSDC_PIN_PULL_DOWN, MSDC_PIN_PULL_UP);
}
void msdc_pin_reset(struct msdc_host *host, int mode)
{
struct msdc_hw *hw = (struct msdc_hw *)host->hw;
void __iomem *base = host->base;
int pull = (mode == MSDC_PIN_PULL_UP) ? GPIO_PULL_UP : GPIO_PULL_DOWN;
/* Config reset pin */
if (hw->flags & MSDC_RST_PIN_EN) {
if (hw->config_gpio_pin) /* NULL */
hw->config_gpio_pin(MSDC_RST_PIN, pull);
if (mode == MSDC_PIN_PULL_UP)
sdr_clr_bits(EMMC_IOCON, EMMC_IOCON_BOOTRST);
else
sdr_set_bits(EMMC_IOCON, EMMC_IOCON_BOOTRST);
}
}
static void msdc_core_power(struct msdc_host *host, int on)
{
N_MSG(CFG, "Turn %s %s power (copower: %d -> %d)",
on ? "on" : "off", "core", host->core_power, on);
if (on && host->core_power == 0) {
msdc_vcore_on(host);
host->core_power = 1;
msleep(1);
} else if (!on && host->core_power == 1) {
msdc_vcore_off(host);
host->core_power = 0;
msleep(1);
}
}
static void msdc_host_power(struct msdc_host *host, int on)
{
N_MSG(CFG, "Turn %s %s power ", on ? "on" : "off", "host");
if (on) {
//msdc_core_power(host, 1); // need do card detection.
msdc_pin_reset(host, MSDC_PIN_PULL_UP);
} else {
msdc_pin_reset(host, MSDC_PIN_PULL_DOWN);
//msdc_core_power(host, 0);
}
}
static void msdc_card_power(struct msdc_host *host, int on)
{
N_MSG(CFG, "Turn %s %s power ", on ? "on" : "off", "card");
if (on) {
msdc_pin_config(host, MSDC_PIN_PULL_UP);
//msdc_vdd_on(host); // need todo card detection.
msleep(1);
} else {
//msdc_vdd_off(host);
msdc_pin_config(host, MSDC_PIN_PULL_DOWN);
msleep(1);
}
}
static void msdc_set_power_mode(struct msdc_host *host, u8 mode)
{
N_MSG(CFG, "Set power mode(%d)", mode);
if (host->power_mode == MMC_POWER_OFF && mode != MMC_POWER_OFF) {
msdc_host_power(host, 1);
msdc_card_power(host, 1);
} else if (host->power_mode != MMC_POWER_OFF && mode == MMC_POWER_OFF) {
msdc_card_power(host, 0);
msdc_host_power(host, 0);
}
host->power_mode = mode;
}
#endif /* end of --- */
#ifdef CONFIG_PM
/*
register as callback function of WIFI(combo_sdio_register_pm) .
can called by msdc_drv_suspend/resume too.
*/
static void msdc_pm(pm_message_t state, void *data)
{
struct msdc_host *host = (struct msdc_host *)data;
int evt = state.event;
if (evt == PM_EVENT_USER_RESUME || evt == PM_EVENT_USER_SUSPEND) {
INIT_MSG("USR_%s: suspend<%d> power<%d>",
evt == PM_EVENT_USER_RESUME ? "EVENT_USER_RESUME" : "EVENT_USER_SUSPEND",
host->suspend, host->power_mode);
}
if (evt == PM_EVENT_SUSPEND || evt == PM_EVENT_USER_SUSPEND) {
if (host->suspend) /* already suspend */ /* default 0*/
return;
/* for memory card. already power off by mmc */
if (evt == PM_EVENT_SUSPEND && host->power_mode == MMC_POWER_OFF)
return;
host->suspend = 1;
host->pm_state = state; /* default PMSG_RESUME */
} else if (evt == PM_EVENT_RESUME || evt == PM_EVENT_USER_RESUME) {
if (!host->suspend) {
//ERR_MSG("warning: already resume");
return;
}
/* No PM resume when USR suspend */
if (evt == PM_EVENT_RESUME && host->pm_state.event == PM_EVENT_USER_SUSPEND) {
ERR_MSG("PM Resume when in USR Suspend"); /* won't happen. */
return;
}
host->suspend = 0;
host->pm_state = state;
}
}
#endif
/*--------------------------------------------------------------------------*/
/* mmc_host_ops members */
/*--------------------------------------------------------------------------*/
static unsigned int msdc_command_start(struct msdc_host *host,
struct mmc_command *cmd,
int tune, /* not used */
unsigned long timeout)
{
void __iomem *base = host->base;
u32 opcode = cmd->opcode;
u32 rawcmd;
u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
MSDC_INT_ACMD19_DONE;
u32 resp;
unsigned long tmo;
/* Protocol layer does not provide response type, but our hardware needs
* to know exact type, not just size!
*/
if (opcode == MMC_SEND_OP_COND || opcode == SD_APP_OP_COND) {
resp = RESP_R3;
} else if (opcode == MMC_SET_RELATIVE_ADDR) {
resp = (mmc_cmd_type(cmd) == MMC_CMD_BCR) ? RESP_R6 : RESP_R1;
} else if (opcode == MMC_FAST_IO) {
resp = RESP_R4;
} else if (opcode == MMC_GO_IRQ_STATE) {
resp = RESP_R5;
} else if (opcode == MMC_SELECT_CARD) {
resp = (cmd->arg != 0) ? RESP_R1B : RESP_NONE;
} else if (opcode == SD_IO_RW_DIRECT || opcode == SD_IO_RW_EXTENDED) {
resp = RESP_R1; /* SDIO workaround. */
} else if (opcode == SD_SEND_IF_COND && (mmc_cmd_type(cmd) == MMC_CMD_BCR)) {
resp = RESP_R1;
} else {
switch (mmc_resp_type(cmd)) {
case MMC_RSP_R1:
resp = RESP_R1;
break;
case MMC_RSP_R1B:
resp = RESP_R1B;
break;
case MMC_RSP_R2:
resp = RESP_R2;
break;
case MMC_RSP_R3:
resp = RESP_R3;
break;
case MMC_RSP_NONE:
default:
resp = RESP_NONE;
break;
}
}
cmd->error = 0;
/* rawcmd :
* vol_swt << 30 | auto_cmd << 28 | blklen << 16 | go_irq << 15 |
* stop << 14 | rw << 13 | dtype << 11 | rsptyp << 7 | brk << 6 | opcode
*/
rawcmd = opcode | msdc_rsp[resp] << 7 | host->blksz << 16;
if (opcode == MMC_READ_MULTIPLE_BLOCK) {
rawcmd |= (2 << 11);
} else if (opcode == MMC_READ_SINGLE_BLOCK) {
rawcmd |= (1 << 11);
} else if (opcode == MMC_WRITE_MULTIPLE_BLOCK) {
rawcmd |= ((2 << 11) | (1 << 13));
} else if (opcode == MMC_WRITE_BLOCK) {
rawcmd |= ((1 << 11) | (1 << 13));
} else if (opcode == SD_IO_RW_EXTENDED) {
if (cmd->data->flags & MMC_DATA_WRITE)
rawcmd |= (1 << 13);
if (cmd->data->blocks > 1)
rawcmd |= (2 << 11);
else
rawcmd |= (1 << 11);
} else if (opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int)-1) {
rawcmd |= (1 << 14);
} else if ((opcode == SD_APP_SEND_SCR) ||
(opcode == SD_APP_SEND_NUM_WR_BLKS) ||
(opcode == SD_SWITCH && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
(opcode == SD_APP_SD_STATUS && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
(opcode == MMC_SEND_EXT_CSD && (mmc_cmd_type(cmd) == MMC_CMD_ADTC))) {
rawcmd |= (1 << 11);
} else if (opcode == MMC_STOP_TRANSMISSION) {
rawcmd |= (1 << 14);
rawcmd &= ~(0x0FFF << 16);
}
N_MSG(CMD, "CMD<%d><0x%.8x> Arg<0x%.8x>", opcode, rawcmd, cmd->arg);
tmo = jiffies + timeout;
if (opcode == MMC_SEND_STATUS) {
for (;;) {
if (!sdc_is_cmd_busy())
break;
if (time_after(jiffies, tmo)) {
ERR_MSG("XXX cmd_busy timeout: before CMD<%d>", opcode);
cmd->error = -ETIMEDOUT;
msdc_reset_hw(host);
goto end;
}
}
} else {
for (;;) {
if (!sdc_is_busy())
break;
if (time_after(jiffies, tmo)) {
ERR_MSG("XXX sdc_busy timeout: before CMD<%d>", opcode);
cmd->error = -ETIMEDOUT;
msdc_reset_hw(host);
goto end;
}
}
}
//BUG_ON(in_interrupt());
host->cmd = cmd;
host->cmd_rsp = resp;
init_completion(&host->cmd_done);
sdr_set_bits(MSDC_INTEN, wints);
sdc_send_cmd(rawcmd, cmd->arg);
end:
return cmd->error;
}
static unsigned int msdc_command_resp(struct msdc_host *host,
struct mmc_command *cmd,
int tune,
unsigned long timeout)
__must_hold(&host->lock)
{
void __iomem *base = host->base;
u32 opcode = cmd->opcode;
//u32 rawcmd;
u32 resp;
u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
MSDC_INT_ACMD19_DONE;
resp = host->cmd_rsp;
BUG_ON(in_interrupt());
//init_completion(&host->cmd_done);
//sdr_set_bits(MSDC_INTEN, wints);
spin_unlock(&host->lock);
if (!wait_for_completion_timeout(&host->cmd_done, 10 * timeout)) {
ERR_MSG("XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>", opcode, cmd->arg);
cmd->error = -ETIMEDOUT;
msdc_reset_hw(host);
}
spin_lock(&host->lock);
sdr_clr_bits(MSDC_INTEN, wints);
host->cmd = NULL;
//end:
#ifdef MT6575_SD_DEBUG
switch (resp) {
case RESP_NONE:
N_MSG(RSP, "CMD_RSP(%d): %d RSP(%d)", opcode, cmd->error, resp);
break;
case RESP_R2:
N_MSG(RSP, "CMD_RSP(%d): %d RSP(%d)= %.8x %.8x %.8x %.8x",
opcode, cmd->error, resp, cmd->resp[0], cmd->resp[1],
cmd->resp[2], cmd->resp[3]);
break;
default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
N_MSG(RSP, "CMD_RSP(%d): %d RSP(%d)= 0x%.8x",
opcode, cmd->error, resp, cmd->resp[0]);
if (cmd->error == 0) {
switch (resp) {
case RESP_R1:
case RESP_R1B:
msdc_dump_card_status(host, cmd->resp[0]);
break;
case RESP_R3:
msdc_dump_ocr_reg(host, cmd->resp[0]);
break;
case RESP_R5:
msdc_dump_io_resp(host, cmd->resp[0]);
break;
case RESP_R6:
msdc_dump_rca_resp(host, cmd->resp[0]);
break;
}
}
break;
}
#endif
/* do we need to save card's RCA when SD_SEND_RELATIVE_ADDR */
if (!tune)
return cmd->error;
/* memory card CRC */
if (host->hw->flags & MSDC_REMOVABLE && cmd->error == -EIO) {
if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
msdc_abort_data(host);
} else {
/* do basic: reset*/
msdc_reset_hw(host);
msdc_clr_fifo();
msdc_clr_int();
}
cmd->error = msdc_tune_cmdrsp(host, cmd);
}
// check DAT0
/* if (resp == RESP_R1B) {
while ((sdr_read32(MSDC_PS) & 0x10000) != 0x10000);
} */
/* CMD12 Error Handle */
return cmd->error;
}
static unsigned int msdc_do_command(struct msdc_host *host,
struct mmc_command *cmd,
int tune,
unsigned long timeout)
{
if (msdc_command_start(host, cmd, tune, timeout))
goto end;
if (msdc_command_resp(host, cmd, tune, timeout))
goto end;
end:
N_MSG(CMD, " return<%d> resp<0x%.8x>", cmd->error, cmd->resp[0]);
return cmd->error;
}
#if 0 /* --- by chhung */
// DMA resume / start / stop
static void msdc_dma_resume(struct msdc_host *host)
{
void __iomem *base = host->base;
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_RESUME, 1);
N_MSG(DMA, "DMA resume");
}
#endif /* end of --- */
static void msdc_dma_start(struct msdc_host *host)
{
void __iomem *base = host->base;
u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
sdr_set_bits(MSDC_INTEN, wints);
//dsb(); /* --- by chhung */
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
N_MSG(DMA, "DMA start");
}
static void msdc_dma_stop(struct msdc_host *host)
{
void __iomem *base = host->base;
//u32 retries=500;
u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
N_MSG(DMA, "DMA status: 0x%.8x", sdr_read32(MSDC_DMA_CFG));
//while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1);
while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS)
;
//dsb(); /* --- by chhung */
sdr_clr_bits(MSDC_INTEN, wints); /* Not just xfer_comp */
N_MSG(DMA, "DMA stop");
}
/* calc checksum */
static u8 msdc_dma_calcs(u8 *buf, u32 len)
{
u32 i, sum = 0;
for (i = 0; i < len; i++)
sum += buf[i];
return 0xFF - (u8)sum;
}
/* gpd bd setup + dma registers */
static void msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
{
void __iomem *base = host->base;
//u32 i, j, num, bdlen, arg, xfersz;
u32 j, num;
struct scatterlist *sg;
struct gpd *gpd;
struct bd *bd;
switch (dma->mode) {
case MSDC_MODE_DMA_BASIC:
BUG_ON(host->xfer_size > 65535);
BUG_ON(dma->sglen != 1);
sdr_write32(MSDC_DMA_SA, PHYSADDR(sg_dma_address(sg)));
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_LASTBUF, 1);
//#if defined (CONFIG_RALINK_MT7620)
if (ralink_soc == MT762X_SOC_MT7620A)
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_XFERSZ, sg_dma_len(sg));
//#elif defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
else
sdr_write32((void __iomem *)(RALINK_MSDC_BASE + 0xa8), sg_dma_len(sg));
//#endif
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ,
MSDC_BRUST_64B);
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 0);
break;
case MSDC_MODE_DMA_DESC:
/* calculate the required number of gpd */
num = (dma->sglen + MAX_BD_PER_GPD - 1) / MAX_BD_PER_GPD;
BUG_ON(num != 1);
gpd = dma->gpd;
bd = dma->bd;
/* modify gpd*/
//gpd->intr = 0;
gpd->hwo = 1; /* hw will clear it */
gpd->bdp = 1;
gpd->chksum = 0; /* need to clear first. */
gpd->chksum = msdc_dma_calcs((u8 *)gpd, 16);
/* modify bd*/
for_each_sg(dma->sg, sg, dma->sglen, j) {
bd[j].blkpad = 0;
bd[j].dwpad = 0;
bd[j].ptr = (void *)sg_dma_address(sg);
bd[j].buflen = sg_dma_len(sg);
if (j == dma->sglen - 1)
bd[j].eol = 1; /* the last bd */
else
bd[j].eol = 0;
bd[j].chksum = 0; /* checksume need to clear first */
bd[j].chksum = msdc_dma_calcs((u8 *)(&bd[j]), 16);
}
sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, 1);
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ,
MSDC_BRUST_64B);
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1);
sdr_write32(MSDC_DMA_SA, PHYSADDR((u32)dma->gpd_addr));
break;
default:
break;
}
N_MSG(DMA, "DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
N_MSG(DMA, "DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
N_MSG(DMA, "DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
}
static void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
struct scatterlist *sg, unsigned int sglen)
{
BUG_ON(sglen > MAX_BD_NUM); /* not support currently */
dma->sg = sg;
dma->sglen = sglen;
dma->mode = MSDC_MODE_DMA_DESC;
N_MSG(DMA, "DMA mode<%d> sglen<%d> xfersz<%d>", dma->mode, dma->sglen,
host->xfer_size);
msdc_dma_config(host, dma);
}
static int msdc_do_request(struct mmc_host *mmc, struct mmc_request *mrq)
__must_hold(&host->lock)
{
struct msdc_host *host = mmc_priv(mmc);
struct mmc_command *cmd;
struct mmc_data *data;
void __iomem *base = host->base;
//u32 intsts = 0;
int read = 1, send_type = 0;
#define SND_DAT 0
#define SND_CMD 1
BUG_ON(mmc == NULL);
BUG_ON(mrq == NULL);
host->error = 0;
cmd = mrq->cmd;
data = mrq->cmd->data;
#if 0 /* --- by chhung */
//if(host->id ==1){
N_MSG(OPS, "enable clock!");
msdc_ungate_clock(host->id);
//}
#endif /* end of --- */
if (!data) {
send_type = SND_CMD;
if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
goto done;
} else {
BUG_ON(data->blksz > HOST_MAX_BLKSZ);
send_type = SND_DAT;
data->error = 0;
read = data->flags & MMC_DATA_READ ? 1 : 0;
host->data = data;
host->xfer_size = data->blocks * data->blksz;
host->blksz = data->blksz;
if (read) {
if ((host->timeout_ns != data->timeout_ns) ||
(host->timeout_clks != data->timeout_clks)) {
msdc_set_timeout(host, data->timeout_ns, data->timeout_clks);
}
}
sdr_write32(SDC_BLK_NUM, data->blocks);
//msdc_clr_fifo(); /* no need */
msdc_dma_on(); /* enable DMA mode first!! */
init_completion(&host->xfer_done);
/* start the command first*/
if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0)
goto done;
data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg,
data->sg_len,
mmc_get_dma_dir(data));
msdc_dma_setup(host, &host->dma, data->sg,
data->sg_count);
/* then wait command done */
if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0)
goto done;
/* for read, the data coming too fast, then CRC error
start DMA no business with CRC. */
//init_completion(&host->xfer_done);
msdc_dma_start(host);
spin_unlock(&host->lock);
if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) {
ERR_MSG("XXX CMD<%d> wait xfer_done<%d> timeout!!", cmd->opcode, data->blocks * data->blksz);
ERR_MSG(" DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
ERR_MSG(" DMA_CA = 0x%x", sdr_read32(MSDC_DMA_CA));
ERR_MSG(" DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
ERR_MSG(" DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
data->error = -ETIMEDOUT;
msdc_reset_hw(host);
msdc_clr_fifo();
msdc_clr_int();
}
spin_lock(&host->lock);
msdc_dma_stop(host);
/* Last: stop transfer */
if (data->stop) {
if (msdc_do_command(host, data->stop, 0, CMD_TIMEOUT) != 0)
goto done;
}
}
done:
if (data != NULL) {
host->data = NULL;
dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
mmc_get_dma_dir(data));
host->blksz = 0;
#if 0 // don't stop twice!
if (host->hw->flags & MSDC_REMOVABLE && data->error) {
msdc_abort_data(host);
/* reset in IRQ, stop command has issued. -> No need */
}
#endif
N_MSG(OPS, "CMD<%d> data<%s %s> blksz<%d> block<%d> error<%d>", cmd->opcode, (dma ? "dma" : "pio"),
(read ? "read " : "write"), data->blksz, data->blocks, data->error);
}
#if 0 /* --- by chhung */
#if 1
//if(host->id==1) {
if (send_type == SND_CMD) {
if (cmd->opcode == MMC_SEND_STATUS) {
if ((cmd->resp[0] & CARD_READY_FOR_DATA) || (CARD_CURRENT_STATE(cmd->resp[0]) != 7)) {
N_MSG(OPS, "disable clock, CMD13 IDLE");
msdc_gate_clock(host->id);
}
} else {
N_MSG(OPS, "disable clock, CMD<%d>", cmd->opcode);
msdc_gate_clock(host->id);
}
} else {
if (read) {
N_MSG(OPS, "disable clock!!! Read CMD<%d>", cmd->opcode);
msdc_gate_clock(host->id);
}
}
//}
#else
msdc_gate_clock(host->id);
#endif
#endif /* end of --- */
if (mrq->cmd->error)
host->error = 0x001;
if (mrq->data && mrq->data->error)
host->error |= 0x010;
if (mrq->stop && mrq->stop->error)
host->error |= 0x100;
//if (host->error) ERR_MSG("host->error<%d>", host->error);
return host->error;
}
static int msdc_app_cmd(struct mmc_host *mmc, struct msdc_host *host)
{
struct mmc_command cmd;
struct mmc_request mrq;
u32 err;
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_APP_CMD;
#if 0 /* bug: we meet mmc->card is null when ACMD6 */
cmd.arg = mmc->card->rca << 16;
#else
cmd.arg = host->app_cmd_arg;
#endif
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
memset(&mrq, 0, sizeof(struct mmc_request));
mrq.cmd = &cmd; cmd.mrq = &mrq;
cmd.data = NULL;
err = msdc_do_command(host, &cmd, 0, CMD_TIMEOUT);
return err;
}
static int msdc_tune_cmdrsp(struct msdc_host *host, struct mmc_command *cmd)
{
int result = -1;
void __iomem *base = host->base;
u32 rsmpl, cur_rsmpl, orig_rsmpl;
u32 rrdly, cur_rrdly = 0xffffffff, orig_rrdly;
u32 skip = 1;
/* ==== don't support 3.0 now ====
1: R_SMPL[1]
2: PAD_CMD_RESP_RXDLY[26:22]
==========================*/
// save the previous tune result
sdr_get_field(MSDC_IOCON, MSDC_IOCON_RSPL, &orig_rsmpl);
sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, &orig_rrdly);
rrdly = 0;
do {
for (rsmpl = 0; rsmpl < 2; rsmpl++) {
/* Lv1: R_SMPL[1] */
cur_rsmpl = (orig_rsmpl + rsmpl) % 2;
if (skip == 1) {
skip = 0;
continue;
}
sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, cur_rsmpl);
if (host->app_cmd) {
result = msdc_app_cmd(host->mmc, host);
if (result) {
ERR_MSG("TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>",
host->mrq->cmd->opcode, cur_rrdly, cur_rsmpl);
continue;
}
}
result = msdc_do_command(host, cmd, 0, CMD_TIMEOUT); // not tune.
ERR_MSG("TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>", cmd->opcode,
(result == 0) ? "PASS" : "FAIL", cur_rrdly, cur_rsmpl);
if (result == 0)
return 0;
if (result != -EIO) {
ERR_MSG("TUNE_CMD<%d> Error<%d> not -EIO", cmd->opcode, result);
return result;
}
/* should be EIO */
if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
msdc_abort_data(host);
}
}
/* Lv2: PAD_CMD_RESP_RXDLY[26:22] */
cur_rrdly = (orig_rrdly + rrdly + 1) % 32;
sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, cur_rrdly);
} while (++rrdly < 32);
return result;
}
/* Support SD2.0 Only */
static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct msdc_host *host = mmc_priv(mmc);
void __iomem *base = host->base;
u32 ddr = 0;
u32 dcrc = 0;
u32 rxdly, cur_rxdly0, cur_rxdly1;
u32 dsmpl, cur_dsmpl, orig_dsmpl;
u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
u32 cur_dat4, cur_dat5, cur_dat6, cur_dat7;
u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
u32 orig_dat4, orig_dat5, orig_dat6, orig_dat7;
int result = -1;
u32 skip = 1;
sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, &orig_dsmpl);
/* Tune Method 2. */
sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
rxdly = 0;
do {
for (dsmpl = 0; dsmpl < 2; dsmpl++) {
cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
if (skip == 1) {
skip = 0;
continue;
}
sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
if (host->app_cmd) {
result = msdc_app_cmd(host->mmc, host);
if (result) {
ERR_MSG("TUNE_BREAD app_cmd<%d> failed", host->mrq->cmd->opcode);
continue;
}
}
result = msdc_do_request(mmc, mrq);
sdr_get_field(SDC_DCRC_STS,
SDC_DCRC_STS_POS | SDC_DCRC_STS_NEG,
&dcrc); /* RO */
if (!ddr)
dcrc &= ~SDC_DCRC_STS_NEG;
ERR_MSG("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>",
(result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc,
sdr_read32(MSDC_DAT_RDDLY0), sdr_read32(MSDC_DAT_RDDLY1), cur_dsmpl);
/* Fix me: result is 0, but dcrc is still exist */
if (result == 0 && dcrc == 0) {
goto done;
} else {
/* there is a case: command timeout, and data phase not processed */
if (mrq->data->error != 0 &&
mrq->data->error != -EIO) {
ERR_MSG("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>",
result, mrq->cmd->error, mrq->data->error);
goto done;
}
}
}
cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
cur_rxdly1 = sdr_read32(MSDC_DAT_RDDLY1);
/* E1 ECO. YD: Reverse */
if (sdr_read32(MSDC_ECO_VER) >= 4) {
orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
orig_dat4 = (cur_rxdly1 >> 24) & 0x1F;
orig_dat5 = (cur_rxdly1 >> 16) & 0x1F;
orig_dat6 = (cur_rxdly1 >> 8) & 0x1F;
orig_dat7 = (cur_rxdly1 >> 0) & 0x1F;
} else {
orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
orig_dat4 = (cur_rxdly1 >> 0) & 0x1F;
orig_dat5 = (cur_rxdly1 >> 8) & 0x1F;
orig_dat6 = (cur_rxdly1 >> 16) & 0x1F;
orig_dat7 = (cur_rxdly1 >> 24) & 0x1F;
}
if (ddr) {
cur_dat0 = (dcrc & (1 << 0) || dcrc & (1 << 8)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
cur_dat1 = (dcrc & (1 << 1) || dcrc & (1 << 9)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
cur_dat2 = (dcrc & (1 << 2) || dcrc & (1 << 10)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
cur_dat3 = (dcrc & (1 << 3) || dcrc & (1 << 11)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
} else {
cur_dat0 = (dcrc & (1 << 0)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
cur_dat1 = (dcrc & (1 << 1)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
cur_dat2 = (dcrc & (1 << 2)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
cur_dat3 = (dcrc & (1 << 3)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
}
cur_dat4 = (dcrc & (1 << 4)) ? ((orig_dat4 + 1) % 32) : orig_dat4;
cur_dat5 = (dcrc & (1 << 5)) ? ((orig_dat5 + 1) % 32) : orig_dat5;
cur_dat6 = (dcrc & (1 << 6)) ? ((orig_dat6 + 1) % 32) : orig_dat6;
cur_dat7 = (dcrc & (1 << 7)) ? ((orig_dat7 + 1) % 32) : orig_dat7;
cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
cur_rxdly1 = (cur_dat4 << 24) | (cur_dat5 << 16) | (cur_dat6 << 8) | (cur_dat7 << 0);
sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
sdr_write32(MSDC_DAT_RDDLY1, cur_rxdly1);
} while (++rxdly < 32);
done:
return result;
}
static int msdc_tune_bwrite(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct msdc_host *host = mmc_priv(mmc);
void __iomem *base = host->base;
u32 wrrdly, cur_wrrdly = 0xffffffff, orig_wrrdly;
u32 dsmpl, cur_dsmpl, orig_dsmpl;
u32 rxdly, cur_rxdly0;
u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
int result = -1;
u32 skip = 1;
// MSDC_IOCON_DDR50CKD need to check. [Fix me]
sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, &orig_wrrdly);
sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, &orig_dsmpl);
/* Tune Method 2. just DAT0 */
sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
/* E1 ECO. YD: Reverse */
if (sdr_read32(MSDC_ECO_VER) >= 4) {
orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
} else {
orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
}
rxdly = 0;
do {
wrrdly = 0;
do {
for (dsmpl = 0; dsmpl < 2; dsmpl++) {
cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
if (skip == 1) {
skip = 0;
continue;
}
sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
if (host->app_cmd) {
result = msdc_app_cmd(host->mmc, host);
if (result) {
ERR_MSG("TUNE_BWRITE app_cmd<%d> failed", host->mrq->cmd->opcode);
continue;
}
}
result = msdc_do_request(mmc, mrq);
ERR_MSG("TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>",
result == 0 ? "PASS" : "FAIL",
cur_dsmpl, cur_wrrdly, cur_rxdly0);
if (result == 0) {
goto done;
} else {
/* there is a case: command timeout, and data phase not processed */
if (mrq->data->error != -EIO) {
ERR_MSG("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>",
result, mrq->cmd->error, mrq->data->error);
goto done;
}
}
}
cur_wrrdly = (orig_wrrdly + wrrdly + 1) % 32;
sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, cur_wrrdly);
} while (++wrrdly < 32);
cur_dat0 = (orig_dat0 + rxdly) % 32; /* only adjust bit-1 for crc */
cur_dat1 = orig_dat1;
cur_dat2 = orig_dat2;
cur_dat3 = orig_dat3;
cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
} while (++rxdly < 32);
done:
return result;
}
static int msdc_get_card_status(struct mmc_host *mmc, struct msdc_host *host, u32 *status)
{
struct mmc_command cmd;
struct mmc_request mrq;
u32 err;
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_SEND_STATUS;
if (mmc->card) {
cmd.arg = mmc->card->rca << 16;
} else {
ERR_MSG("cmd13 mmc card is null");
cmd.arg = host->app_cmd_arg;
}
cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
memset(&mrq, 0, sizeof(struct mmc_request));
mrq.cmd = &cmd; cmd.mrq = &mrq;
cmd.data = NULL;
err = msdc_do_command(host, &cmd, 1, CMD_TIMEOUT);
if (status)
*status = cmd.resp[0];
return err;
}
static int msdc_check_busy(struct mmc_host *mmc, struct msdc_host *host)
{
u32 err = 0;
u32 status = 0;
do {
err = msdc_get_card_status(mmc, host, &status);
if (err)
return err;
/* need cmd12? */
ERR_MSG("cmd<13> resp<0x%x>", status);
} while (R1_CURRENT_STATE(status) == 7);
return err;
}
/* failed when msdc_do_request */
static int msdc_tune_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct msdc_host *host = mmc_priv(mmc);
struct mmc_command *cmd;
struct mmc_data *data;
//u32 base = host->base;
int ret = 0, read;
cmd = mrq->cmd;
data = mrq->cmd->data;
read = data->flags & MMC_DATA_READ ? 1 : 0;
if (read) {
if (data->error == -EIO)
ret = msdc_tune_bread(mmc, mrq);
} else {
ret = msdc_check_busy(mmc, host);
if (ret) {
ERR_MSG("XXX cmd13 wait program done failed");
return ret;
}
/* CRC and TO */
/* Fix me: don't care card status? */
ret = msdc_tune_bwrite(mmc, mrq);
}
return ret;
}
/* ops.request */
static void msdc_ops_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct msdc_host *host = mmc_priv(mmc);
//=== for sdio profile ===
#if 0 /* --- by chhung */
u32 old_H32, old_L32, new_H32, new_L32;
u32 ticks = 0, opcode = 0, sizes = 0, bRx = 0;
#endif /* end of --- */
WARN_ON(host->mrq);
/* start to process */
spin_lock(&host->lock);
#if 0 /* --- by chhung */
if (sdio_pro_enable) { //=== for sdio profile ===
if (mrq->cmd->opcode == 52 || mrq->cmd->opcode == 53)
GPT_GetCounter64(&old_L32, &old_H32);
}
#endif /* end of --- */
host->mrq = mrq;
if (msdc_do_request(mmc, mrq)) {
if (host->hw->flags & MSDC_REMOVABLE && ralink_soc == MT762X_SOC_MT7621AT && mrq->data && mrq->data->error)
msdc_tune_request(mmc, mrq);
}
/* ==== when request done, check if app_cmd ==== */
if (mrq->cmd->opcode == MMC_APP_CMD) {
host->app_cmd = 1;
host->app_cmd_arg = mrq->cmd->arg; /* save the RCA */
} else {
host->app_cmd = 0;
//host->app_cmd_arg = 0;
}
host->mrq = NULL;
#if 0 /* --- by chhung */
//=== for sdio profile ===
if (sdio_pro_enable) {
if (mrq->cmd->opcode == 52 || mrq->cmd->opcode == 53) {
GPT_GetCounter64(&new_L32, &new_H32);
ticks = msdc_time_calc(old_L32, old_H32, new_L32, new_H32);
opcode = mrq->cmd->opcode;
if (mrq->cmd->data) {
sizes = mrq->cmd->data->blocks * mrq->cmd->data->blksz;
bRx = mrq->cmd->data->flags & MMC_DATA_READ ? 1 : 0;
} else {
bRx = mrq->cmd->arg & 0x80000000 ? 1 : 0;
}
if (!mrq->cmd->error)
msdc_performance(opcode, sizes, bRx, ticks);
}
}
#endif /* end of --- */
spin_unlock(&host->lock);
mmc_request_done(mmc, mrq);
return;
}
/* called by ops.set_ios */
static void msdc_set_buswidth(struct msdc_host *host, u32 width)
{
void __iomem *base = host->base;
u32 val = sdr_read32(SDC_CFG);
val &= ~SDC_CFG_BUSWIDTH;
switch (width) {
default:
case MMC_BUS_WIDTH_1:
width = 1;
val |= (MSDC_BUS_1BITS << 16);
break;
case MMC_BUS_WIDTH_4:
val |= (MSDC_BUS_4BITS << 16);
break;
case MMC_BUS_WIDTH_8:
val |= (MSDC_BUS_8BITS << 16);
break;
}
sdr_write32(SDC_CFG, val);
N_MSG(CFG, "Bus Width = %d", width);
}
/* ops.set_ios */
static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct msdc_host *host = mmc_priv(mmc);
void __iomem *base = host->base;
u32 ddr = 0;
#ifdef MT6575_SD_DEBUG
static char *vdd[] = {
"1.50v", "1.55v", "1.60v", "1.65v", "1.70v", "1.80v", "1.90v",
"2.00v", "2.10v", "2.20v", "2.30v", "2.40v", "2.50v", "2.60v",
"2.70v", "2.80v", "2.90v", "3.00v", "3.10v", "3.20v", "3.30v",
"3.40v", "3.50v", "3.60v"
};
static char *power_mode[] = {
"OFF", "UP", "ON"
};
static char *bus_mode[] = {
"UNKNOWN", "OPENDRAIN", "PUSHPULL"
};
static char *timing[] = {
"LEGACY", "MMC_HS", "SD_HS"
};
printk("SET_IOS: CLK(%dkHz), BUS(%s), BW(%u), PWR(%s), VDD(%s), TIMING(%s)",
ios->clock / 1000, bus_mode[ios->bus_mode],
(ios->bus_width == MMC_BUS_WIDTH_4) ? 4 : 1,
power_mode[ios->power_mode], vdd[ios->vdd], timing[ios->timing]);
#endif
msdc_set_buswidth(host, ios->bus_width);
/* Power control ??? */
switch (ios->power_mode) {
case MMC_POWER_OFF:
case MMC_POWER_UP:
// msdc_set_power_mode(host, ios->power_mode); /* --- by chhung */
break;
case MMC_POWER_ON:
host->power_mode = MMC_POWER_ON;
break;
default:
break;
}
/* Clock control */
if (host->mclk != ios->clock) {
if (ios->clock > 25000000) {
//if (!(host->hw->flags & MSDC_REMOVABLE)) {
INIT_MSG("SD data latch edge<%d>", MSDC_SMPL_FALLING);
sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL,
MSDC_SMPL_FALLING);
sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL,
MSDC_SMPL_FALLING);
//} /* for tuning debug */
} else { /* default value */
sdr_write32(MSDC_IOCON, 0x00000000);
// sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
// sdr_write32(MSDC_PAD_TUNE, 0x00000000);
sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
}
msdc_set_mclk(host, ddr, ios->clock);
}
}
/* ops.get_ro */
static int msdc_ops_get_ro(struct mmc_host *mmc)
{
struct msdc_host *host = mmc_priv(mmc);
void __iomem *base = host->base;
unsigned long flags;
int ro = 0;
if (host->hw->flags & MSDC_WP_PIN_EN) { /* set for card */
spin_lock_irqsave(&host->lock, flags);
ro = (sdr_read32(MSDC_PS) >> 31);
spin_unlock_irqrestore(&host->lock, flags);
}
return ro;
}
/* ops.get_cd */
static int msdc_ops_get_cd(struct mmc_host *mmc)
{
struct msdc_host *host = mmc_priv(mmc);
void __iomem *base = host->base;
unsigned long flags;
int present = 1;
/* for sdio, MSDC_REMOVABLE not set, always return 1 */
if (!(host->hw->flags & MSDC_REMOVABLE)) {
/* For sdio, read H/W always get<1>, but may timeout some times */
#if 1
host->card_inserted = 1;
return 1;
#else
host->card_inserted = (host->pm_state.event == PM_EVENT_USER_RESUME) ? 1 : 0;
INIT_MSG("sdio ops_get_cd<%d>", host->card_inserted);
return host->card_inserted;
#endif
}
/* MSDC_CD_PIN_EN set for card */
if (host->hw->flags & MSDC_CD_PIN_EN) {
spin_lock_irqsave(&host->lock, flags);
#if 0
present = host->card_inserted; /* why not read from H/W: Fix me*/
#else
// CD
if (cd_active_low)
present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1;
else
present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 1 : 0;
host->card_inserted = present;
#endif
spin_unlock_irqrestore(&host->lock, flags);
} else {
present = 0; /* TODO? Check DAT3 pins for card detection */
}
INIT_MSG("ops_get_cd return<%d>", present);
return present;
}
static struct mmc_host_ops mt_msdc_ops = {
.request = msdc_ops_request,
.set_ios = msdc_ops_set_ios,
.get_ro = msdc_ops_get_ro,
.get_cd = msdc_ops_get_cd,
};
/*--------------------------------------------------------------------------*/
/* interrupt handler */
/*--------------------------------------------------------------------------*/
static irqreturn_t msdc_irq(int irq, void *dev_id)
{
struct msdc_host *host = (struct msdc_host *)dev_id;
struct mmc_data *data = host->data;
struct mmc_command *cmd = host->cmd;
void __iomem *base = host->base;
u32 cmdsts = MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO | MSDC_INT_CMDRDY |
MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | MSDC_INT_ACMDRDY |
MSDC_INT_ACMD19_DONE;
u32 datsts = MSDC_INT_DATCRCERR | MSDC_INT_DATTMO;
u32 intsts = sdr_read32(MSDC_INT);
u32 inten = sdr_read32(MSDC_INTEN); inten &= intsts;
sdr_write32(MSDC_INT, intsts); /* clear interrupts */
/* MSG will cause fatal error */
/* card change interrupt */
if (intsts & MSDC_INT_CDSC) {
if (host->mmc->caps & MMC_CAP_NEEDS_POLL)
return IRQ_HANDLED;
IRQ_MSG("MSDC_INT_CDSC irq<0x%.8x>", intsts);
schedule_delayed_work(&host->card_delaywork, HZ);
/* tuning when plug card ? */
}
/* sdio interrupt */
if (intsts & MSDC_INT_SDIOIRQ) {
IRQ_MSG("XXX MSDC_INT_SDIOIRQ"); /* seems not sdio irq */
//mmc_signal_sdio_irq(host->mmc);
}
/* transfer complete interrupt */
if (data != NULL) {
if (inten & MSDC_INT_XFER_COMPL) {
data->bytes_xfered = host->xfer_size;
complete(&host->xfer_done);
}
if (intsts & datsts) {
/* do basic reset, or stop command will sdc_busy */
msdc_reset_hw(host);
msdc_clr_fifo();
msdc_clr_int();
if (intsts & MSDC_INT_DATTMO) {
IRQ_MSG("XXX CMD<%d> MSDC_INT_DATTMO", host->mrq->cmd->opcode);
data->error = -ETIMEDOUT;
} else if (intsts & MSDC_INT_DATCRCERR) {
IRQ_MSG("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>", host->mrq->cmd->opcode, sdr_read32(SDC_DCRC_STS));
data->error = -EIO;
}
//if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {
complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
}
}
/* command interrupts */
if ((cmd != NULL) && (intsts & cmdsts)) {
if ((intsts & MSDC_INT_CMDRDY) || (intsts & MSDC_INT_ACMDRDY) ||
(intsts & MSDC_INT_ACMD19_DONE)) {
u32 *rsp = &cmd->resp[0];
switch (host->cmd_rsp) {
case RESP_NONE:
break;
case RESP_R2:
*rsp++ = sdr_read32(SDC_RESP3); *rsp++ = sdr_read32(SDC_RESP2);
*rsp++ = sdr_read32(SDC_RESP1); *rsp++ = sdr_read32(SDC_RESP0);
break;
default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
if ((intsts & MSDC_INT_ACMDRDY) || (intsts & MSDC_INT_ACMD19_DONE))
*rsp = sdr_read32(SDC_ACMD_RESP);
else
*rsp = sdr_read32(SDC_RESP0);
break;
}
} else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) {
if (intsts & MSDC_INT_ACMDCRCERR)
IRQ_MSG("XXX CMD<%d> MSDC_INT_ACMDCRCERR", cmd->opcode);
else
IRQ_MSG("XXX CMD<%d> MSDC_INT_RSPCRCERR", cmd->opcode);
cmd->error = -EIO;
} else if ((intsts & MSDC_INT_CMDTMO) || (intsts & MSDC_INT_ACMDTMO)) {
if (intsts & MSDC_INT_ACMDTMO)
IRQ_MSG("XXX CMD<%d> MSDC_INT_ACMDTMO", cmd->opcode);
else
IRQ_MSG("XXX CMD<%d> MSDC_INT_CMDTMO", cmd->opcode);
cmd->error = -ETIMEDOUT;
msdc_reset_hw(host);
msdc_clr_fifo();
msdc_clr_int();
}
complete(&host->cmd_done);
}
/* mmc irq interrupts */
if (intsts & MSDC_INT_MMCIRQ)
printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, sdr_read32(SDC_CSTS));
#ifdef MT6575_SD_DEBUG
{
/* msdc_int_reg *int_reg = (msdc_int_reg*)&intsts;*/
N_MSG(INT, "IRQ_EVT(0x%x): MMCIRQ(%d) CDSC(%d), ACRDY(%d), ACTMO(%d), ACCRE(%d) AC19DN(%d)",
intsts,
int_reg->mmcirq,
int_reg->cdsc,
int_reg->atocmdrdy,
int_reg->atocmdtmo,
int_reg->atocmdcrc,
int_reg->atocmd19done);
N_MSG(INT, "IRQ_EVT(0x%x): SDIO(%d) CMDRDY(%d), CMDTMO(%d), RSPCRC(%d), CSTA(%d)",
intsts,
int_reg->sdioirq,
int_reg->cmdrdy,
int_reg->cmdtmo,
int_reg->rspcrc,
int_reg->csta);
N_MSG(INT, "IRQ_EVT(0x%x): XFCMP(%d) DXDONE(%d), DATTMO(%d), DATCRC(%d), DMAEMP(%d)",
intsts,
int_reg->xfercomp,
int_reg->dxferdone,
int_reg->dattmo,
int_reg->datcrc,
int_reg->dmaqempty);
}
#endif
return IRQ_HANDLED;
}
/*--------------------------------------------------------------------------*/
/* platform_driver members */
/*--------------------------------------------------------------------------*/
/* called by msdc_drv_probe/remove */
static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
{
struct msdc_hw *hw = host->hw;
void __iomem *base = host->base;
/* for sdio, not set */
if ((hw->flags & MSDC_CD_PIN_EN) == 0) {
/* Pull down card detection pin since it is not avaiable */
/*
if (hw->config_gpio_pin)
hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
*/
sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
return;
}
N_MSG(CFG, "CD IRQ Eanable(%d)", enable);
if (enable) {
/* card detection circuit relies on the core power so that the core power
* shouldn't be turned off. Here adds a reference count to keep
* the core power alive.
*/
//msdc_vcore_on(host); //did in msdc_init_hw()
if (hw->config_gpio_pin) /* NULL */
hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP);
sdr_set_field(MSDC_PS, MSDC_PS_CDDEBOUNCE, DEFAULT_DEBOUNCE);
sdr_set_bits(MSDC_PS, MSDC_PS_CDEN);
sdr_set_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
sdr_set_bits(SDC_CFG, SDC_CFG_INSWKUP); /* not in document! Fix me */
} else {
if (hw->config_gpio_pin) /* NULL */
hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
/* Here decreases a reference count to core power since card
* detection circuit is shutdown.
*/
//msdc_vcore_off(host);
}
}
/* called by msdc_drv_probe */
static void msdc_init_hw(struct msdc_host *host)
{
void __iomem *base = host->base;
/* Power on */
#if 0 /* --- by chhung */
msdc_vcore_on(host);
msdc_pin_reset(host, MSDC_PIN_PULL_UP);
msdc_select_clksrc(host, hw->clk_src);
enable_clock(PERI_MSDC0_PDN + host->id, "SD");
msdc_vdd_on(host);
#endif /* end of --- */
/* Configure to MMC/SD mode */
sdr_set_field(MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC);
/* Reset */
msdc_reset_hw(host);
msdc_clr_fifo();
/* Disable card detection */
sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
/* Disable and clear all interrupts */
sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
#if 1
/* reset tuning parameter */
sdr_write32(MSDC_PAD_CTL0, 0x00090000);
sdr_write32(MSDC_PAD_CTL1, 0x000A0000);
sdr_write32(MSDC_PAD_CTL2, 0x000A0000);
// sdr_write32(MSDC_PAD_TUNE, 0x00000000);
sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
// sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
sdr_write32(MSDC_IOCON, 0x00000000);
#if 0 // use MT7620 default value: 0x403c004f
sdr_write32(MSDC_PATCH_BIT0, 0x003C000F); /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/
#endif
if (sdr_read32(MSDC_ECO_VER) >= 4) {
if (host->id == 1) {
sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_WRDAT_CRCS, 1);
sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMD_RSP, 1);
/* internal clock: latch read data */
sdr_set_bits(MSDC_PATCH_BIT0, MSDC_PATCH_BIT_CKGEN_CK);
}
}
#endif
/* for safety, should clear SDC_CFG.SDIO_INT_DET_EN & set SDC_CFG.SDIO in
pre-loader,uboot,kernel drivers. and SDC_CFG.SDIO_INT_DET_EN will be only
set when kernel driver wants to use SDIO bus interrupt */
/* Configure to enable SDIO mode. it's must otherwise sdio cmd5 failed */
sdr_set_bits(SDC_CFG, SDC_CFG_SDIO);
/* disable detect SDIO device interupt function */
sdr_clr_bits(SDC_CFG, SDC_CFG_SDIOIDE);
/* eneable SMT for glitch filter */
sdr_set_bits(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKSMT);
sdr_set_bits(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDSMT);
sdr_set_bits(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATSMT);
#if 1
/* set clk, cmd, dat pad driving */
sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, 4);
sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, 4);
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, 4);
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, 4);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, 4);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, 4);
#else
sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, 0);
sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, 0);
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, 0);
sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, 0);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, 0);
sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, 0);
#endif
/* set sampling edge */
/* write crc timeout detection */
sdr_set_field(MSDC_PATCH_BIT0, 1 << 30, 1);
/* Configure to default data timeout */
sdr_set_field(SDC_CFG, SDC_CFG_DTOC, DEFAULT_DTOC);
msdc_set_buswidth(host, MMC_BUS_WIDTH_1);
N_MSG(FUC, "init hardware done!");
}
/* called by msdc_drv_remove */
static void msdc_deinit_hw(struct msdc_host *host)
{
void __iomem *base = host->base;
/* Disable and clear all interrupts */
sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
/* Disable card detection */
msdc_enable_cd_irq(host, 0);
// msdc_set_power_mode(host, MMC_POWER_OFF); /* make sure power down */ /* --- by chhung */
}
/* init gpd and bd list in msdc_drv_probe */
static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma)
{
struct gpd *gpd = dma->gpd;
struct bd *bd = dma->bd;
int i;
/* we just support one gpd, but gpd->next must be set for desc
* DMA. That's why we alloc 2 gpd structurs.
*/
memset(gpd, 0, sizeof(struct gpd) * 2);
gpd->bdp = 1; /* hwo, cs, bd pointer */
gpd->ptr = (void *)dma->bd_addr; /* physical address */
gpd->next = (void *)((u32)dma->gpd_addr + sizeof(struct gpd));
memset(bd, 0, sizeof(struct bd) * MAX_BD_NUM);
for (i = 0; i < (MAX_BD_NUM - 1); i++)
bd[i].next = (void *)(dma->bd_addr + sizeof(*bd) * (i + 1));
}
static int msdc_drv_probe(struct platform_device *pdev)
{
struct resource *res;
__iomem void *base;
struct mmc_host *mmc;
struct msdc_host *host;
struct msdc_hw *hw;
int ret;
u32 reg;
//FIXME: this should be done by pinconf and not by the sd driver
if (ralink_soc == MT762X_SOC_MT7688 ||
ralink_soc == MT762X_SOC_MT7628AN) {
/* set EPHY pads to digital mode */
reg = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE + 0x3c));
reg |= 0x1e << 16;
sdr_write32((void __iomem *)(RALINK_SYSCTL_BASE + 0x3c), reg);
}
hw = &msdc0_hw;
if (of_property_read_bool(pdev->dev.of_node, "mtk,wp-en"))
msdc0_hw.flags |= MSDC_WP_PIN_EN;
/* Allocate MMC host for this device */
mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
if (!mmc)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base)) {
ret = PTR_ERR(base);
goto host_free;
}
/* Set host parameters to mmc */
mmc->ops = &mt_msdc_ops;
mmc->f_min = HOST_MIN_MCLK;
mmc->f_max = HOST_MAX_MCLK;
mmc->ocr_avail = MSDC_OCR_AVAIL;
mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
//TODO: read this as bus-width from dt (via mmc_of_parse)
mmc->caps |= MMC_CAP_4_BIT_DATA;
cd_active_low = !of_property_read_bool(pdev->dev.of_node, "mediatek,cd-high");
if (of_property_read_bool(pdev->dev.of_node, "mediatek,cd-poll"))
mmc->caps |= MMC_CAP_NEEDS_POLL;
/* MMC core transfer sizes tunable parameters */
mmc->max_segs = MAX_HW_SGMTS;
mmc->max_seg_size = MAX_SGMT_SZ;
mmc->max_blk_size = HOST_MAX_BLKSZ;
mmc->max_req_size = MAX_REQ_SZ;
mmc->max_blk_count = mmc->max_req_size;
host = mmc_priv(mmc);
host->hw = hw;
host->mmc = mmc;
host->id = pdev->id;
if (host->id < 0 || host->id >= 4)
host->id = 0;
host->error = 0;
host->irq = platform_get_irq(pdev, 0);
if (host->irq < 0) {
ret = -EINVAL;
goto host_free;
}
host->base = base;
host->mclk = 0; /* mclk: the request clock of mmc sub-system */
host->hclk = hclks[hw->clk_src]; /* hclk: clock of clock source to msdc controller */
host->sclk = 0; /* sclk: the really clock after divition */
host->pm_state = PMSG_RESUME;
host->suspend = 0;
host->core_clkon = 0;
host->card_clkon = 0;
host->core_power = 0;
host->power_mode = MMC_POWER_OFF;
// host->card_inserted = hw->flags & MSDC_REMOVABLE ? 0 : 1;
host->timeout_ns = 0;
host->timeout_clks = DEFAULT_DTOC * 65536;
host->mrq = NULL;
//init_MUTEX(&host->sem); /* we don't need to support multiple threads access */
mmc_dev(mmc)->dma_mask = NULL;
/* using dma_alloc_coherent*/ /* todo: using 1, for all 4 slots */
host->dma.gpd = dma_alloc_coherent(&pdev->dev,
MAX_GPD_NUM * sizeof(struct gpd),
&host->dma.gpd_addr, GFP_KERNEL);
host->dma.bd = dma_alloc_coherent(&pdev->dev,
MAX_BD_NUM * sizeof(struct bd),
&host->dma.bd_addr, GFP_KERNEL);
if (!host->dma.gpd || !host->dma.bd) {
ret = -ENOMEM;
goto release_mem;
}
msdc_init_gpd_bd(host, &host->dma);
INIT_DELAYED_WORK(&host->card_delaywork, msdc_tasklet_card);
spin_lock_init(&host->lock);
msdc_init_hw(host);
/* TODO check weather flags 0 is correct, the mtk-sd driver uses
* IRQF_TRIGGER_LOW | IRQF_ONESHOT for flags
*
* for flags 0 the trigger polarity is determined by the
* device tree, but not the oneshot flag, but maybe it is also
* not needed because the soc could be oneshot safe.
*/
ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq, 0, pdev->name,
host);
if (ret)
goto release;
platform_set_drvdata(pdev, mmc);
ret = mmc_add_host(mmc);
if (ret)
goto release;
/* Config card detection pin and enable interrupts */
if (hw->flags & MSDC_CD_PIN_EN) { /* set for card */
msdc_enable_cd_irq(host, 1);
} else {
msdc_enable_cd_irq(host, 0);
}
return 0;
release:
platform_set_drvdata(pdev, NULL);
msdc_deinit_hw(host);
cancel_delayed_work_sync(&host->card_delaywork);
release_mem:
if (host->dma.gpd)
dma_free_coherent(&pdev->dev, MAX_GPD_NUM * sizeof(struct gpd),
host->dma.gpd, host->dma.gpd_addr);
if (host->dma.bd)
dma_free_coherent(&pdev->dev, MAX_BD_NUM * sizeof(struct bd),
host->dma.bd, host->dma.bd_addr);
host_free:
mmc_free_host(mmc);
return ret;
}
/* 4 device share one driver, using "drvdata" to show difference */
static int msdc_drv_remove(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct msdc_host *host;
mmc = platform_get_drvdata(pdev);
BUG_ON(!mmc);
host = mmc_priv(mmc);
BUG_ON(!host);
ERR_MSG("removed !!!");
platform_set_drvdata(pdev, NULL);
mmc_remove_host(host->mmc);
msdc_deinit_hw(host);
cancel_delayed_work_sync(&host->card_delaywork);
dma_free_coherent(&pdev->dev, MAX_GPD_NUM * sizeof(struct gpd),
host->dma.gpd, host->dma.gpd_addr);
dma_free_coherent(&pdev->dev, MAX_BD_NUM * sizeof(struct bd),
host->dma.bd, host->dma.bd_addr);
mmc_free_host(host->mmc);
return 0;
}
/* Fix me: Power Flow */
#ifdef CONFIG_PM
static void msdc_drv_pm(struct platform_device *pdev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
if (mmc) {
struct msdc_host *host = mmc_priv(mmc);
msdc_pm(state, (void *)host);
}
}
static int msdc_drv_suspend(struct platform_device *pdev, pm_message_t state)
{
if (state.event == PM_EVENT_SUSPEND)
msdc_drv_pm(pdev, state);
return 0;
}
static int msdc_drv_resume(struct platform_device *pdev)
{
struct pm_message state;
state.event = PM_EVENT_RESUME;
msdc_drv_pm(pdev, state);
return 0;
}
#endif
static const struct of_device_id mt7620_sdhci_match[] = {
{ .compatible = "ralink,mt7620-sdhci" },
{},
};
MODULE_DEVICE_TABLE(of, mt7620_sdhci_match);
static struct platform_driver mt_msdc_driver = {
.probe = msdc_drv_probe,
.remove = msdc_drv_remove,
#ifdef CONFIG_PM
.suspend = msdc_drv_suspend,
.resume = msdc_drv_resume,
#endif
.driver = {
.name = DRV_NAME,
.of_match_table = mt7620_sdhci_match,
},
};
/*--------------------------------------------------------------------------*/
/* module init/exit */
/*--------------------------------------------------------------------------*/
static int __init mt_msdc_init(void)
{
int ret;
ret = platform_driver_register(&mt_msdc_driver);
if (ret) {
printk(KERN_ERR DRV_NAME ": Can't register driver");
return ret;
}
#if defined(MT6575_SD_DEBUG)
msdc_debug_proc_init();
#endif
return 0;
}
static void __exit mt_msdc_exit(void)
{
platform_driver_unregister(&mt_msdc_driver);
}
module_init(mt_msdc_init);
module_exit(mt_msdc_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MediaTek MT6575 SD/MMC Card Driver");
MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>");
Reference in a new issue View git blame Copy permalink