274546046d
Support Abicom International Scorpion SC1750 Board QCA9550 700MHz Extended Temperature Range 256MB DDR2 256MB Nand Flash 16MB Nor Flash 1x SFP, 1x PCIe 2x 10/100/1000 Ethernet 135x100 mm 802.11ng/g/b 802.11ac/an/a Signed-off-by: Conor O'Gorman <i@conorogorman.net>
145 lines
3.9 KiB
C
145 lines
3.9 KiB
C
/*
|
|
* Abicom International Scorpion SC1750 support.
|
|
*
|
|
* Copyright (c) 2012 Qualcomm Atheros
|
|
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/phy-at803x.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "pci.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-nfc.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define SC1750_GPIO_LED_POWER 11
|
|
#define SC1750_GPIO_LED_ERR1 12
|
|
#define SC1750_GPIO_LED_WLAN 13
|
|
#define SC1750_GPIO_LED_ERR2 14
|
|
#define SC1750_GPIO_LED_OK3 15
|
|
#define SC1750_GPIO_LED_ERR3 16
|
|
#define SC1750_GPIO_BTN_RESET 4
|
|
|
|
#define SC1750_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define SC1750_KEYS_DEBOUNCE_INTERVAL (3 * SC1750_KEYS_POLL_INTERVAL)
|
|
|
|
#define SC1750_MAC0_OFFSET 0
|
|
#define SC1750_MAC1_OFFSET 6
|
|
#define SC1750_WMAC_CALDATA_OFFSET 0x1000
|
|
#define SC1750_PCIE_CALDATA_OFFSET 0x5000
|
|
|
|
static struct gpio_led sc1750_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "sc1750:green:power",
|
|
.gpio = SC1750_GPIO_LED_POWER,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "sc1750:red:power",
|
|
.gpio = SC1750_GPIO_LED_ERR1,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "sc1750:green:wlan",
|
|
.gpio = SC1750_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "sc1750:red:wlan",
|
|
.gpio = SC1750_GPIO_LED_ERR2,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button sc1750_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = SC1750_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = SC1750_GPIO_BTN_RESET,
|
|
.active_low = 0,
|
|
}
|
|
};
|
|
|
|
static struct at803x_platform_data at803x_data = {
|
|
.disable_smarteee = 1,
|
|
.enable_rgmii_rx_delay = 0,
|
|
.enable_rgmii_tx_delay = 0,
|
|
};
|
|
|
|
static struct mdio_board_info sc1750_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 1,
|
|
.platform_data = &at803x_data,
|
|
},
|
|
};
|
|
|
|
static void __init sc1750_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(sc1750_leds_gpio),
|
|
sc1750_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, SC1750_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(sc1750_gpio_keys),
|
|
sc1750_gpio_keys);
|
|
|
|
ath79_register_usb();
|
|
ath79_register_nfc();
|
|
|
|
ath79_register_wmac(art + SC1750_WMAC_CALDATA_OFFSET, NULL);
|
|
|
|
ath79_register_mdio(0, 0);
|
|
mdiobus_register_board_info(sc1750_mdio0_info,
|
|
ARRAY_SIZE(sc1750_mdio0_info));
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + SC1750_MAC0_OFFSET, 0);
|
|
|
|
ath79_eth0_pll_data.pll_1000 = 0xa6000101;
|
|
ath79_eth0_pll_data.pll_100 = 0xa4000101;
|
|
/* GMAC0 is connected to the RMGII interface */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = 0xF;
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the SGMII interface */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
|
|
ath79_register_eth(1);
|
|
|
|
ath79_register_pci();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_SC1750, "SC1750", "Abicom SC1750", sc1750_setup);
|