openwrtv4/target/linux/ramips/dts/U7628-01.dtsi
Mathias Kresin a58535771f ramips: set usb led trigger via devicetree
Assign the usbdev trigger via devicetree for all subtargets and drop
the userspace handling of the usb leds.

With the change all usb ports are triggering the usb led instead of
only usb 1.1 XOR usb 2.0 XOR usb 3.0 as it was before.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-10-07 11:34:18 +02:00

136 lines
3.4 KiB
Text

/*
* BSD LICENSE
*
* Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
* Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "unielec,u7628-01", "mediatek,mt7628an-soc";
aliases {
led-status = &led_power;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_power: power {
label = "u7628-01:green:power";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
wlan {
label = "u7628-01:green:wlan";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wan {
label = "u7628-01:green:wan";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "u7628-01:green:lan1";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "u7628-01:green:lan2";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "u7628-01:green:lan3";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "u7628-01:green:lan4";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
usb {
label = "u7628-01:green:usb";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&pcie {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x0>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "wdt", "wled_an";
ralink,function = "gpio";
};
};
};