openwrtv4/target/linux/gemini/patches-4.4/130-usb-ehci-add-fot2g-driver.patch
Stijn Tintel df04723478 gemini: rename patches directory to patches-4.4
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-24 01:08:32 +03:00

133 lines
3.9 KiB
Diff

--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -352,11 +352,13 @@ static void ehci_silence_controller(stru
ehci->rh_state = EHCI_RH_HALTED;
ehci_turn_off_all_ports(ehci);
+#ifndef CONFIG_ARCH_GEMINI
/* make BIOS/etc use companion controller during reboot */
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
/* unblock posted writes */
ehci_readl(ehci, &ehci->regs->configured_flag);
+#endif
spin_unlock_irq(&ehci->lock);
}
@@ -608,7 +610,9 @@ static int ehci_run (struct usb_hcd *hcd
// Philips, Intel, and maybe others need CMD_RUN before the
// root hub will detect new devices (why?); NEC doesn't
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+#ifndef CONFIG_ARCH_GEMINI
ehci->command |= CMD_RUN;
+#endif
ehci_writel(ehci, ehci->command, &ehci->regs->command);
dbg_cmd (ehci, "init", ehci->command);
@@ -628,9 +632,11 @@ static int ehci_run (struct usb_hcd *hcd
*/
down_write(&ehci_cf_port_reset_rwsem);
ehci->rh_state = EHCI_RH_RUNNING;
+#ifndef CONFIG_ARCH_GEMINI
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
msleep(5);
+#endif
up_write(&ehci_cf_port_reset_rwsem);
ehci->last_periodic_enable = ktime_get_real();
@@ -768,9 +774,10 @@ static irqreturn_t ehci_irq (struct usb_
pcd_status = status;
/* resume root hub? */
+#ifndef CONFIG_ARCH_GEMINI
if (ehci->rh_state == EHCI_RH_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
-
+#endif
/* get per-port change detect bits */
if (ehci->has_ppcd)
ppcd = status >> 16;
@@ -1296,6 +1303,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
#endif
+#ifdef CONFIG_ARCH_GEMINI
+#include "ehci-fotg2.c"
+#define PLATFORM_DRIVER ehci_fotg2_driver
+#endif
+
static int __init ehci_hcd_init(void)
{
int retval = 0;
--- a/drivers/usb/host/ehci-timer.c
+++ b/drivers/usb/host/ehci-timer.c
@@ -208,7 +208,9 @@ static void ehci_handle_controller_death
/* Clean up the mess */
ehci->rh_state = EHCI_RH_HALTED;
+#ifndef CONFIG_ARCH_GEMINI
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+#endif
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
ehci_work(ehci);
end_unlink_async(ehci);
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -657,7 +657,12 @@ static inline unsigned int
ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
{
if (ehci_is_TDI(ehci)) {
- switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
+#ifdef CONFIG_ARCH_GEMINI
+ portsc = readl(ehci_to_hcd(ehci)->regs + 0x80);
+ switch ((portsc>>22)&3) {
+#else
+ switch ((portsc>>26)&3) {
+#endif
case 0:
return 0;
case 1:
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -1076,6 +1076,11 @@ int ehci_hub_control(
/* see what we found out */
temp = check_reset_complete (ehci, wIndex, status_reg,
ehci_readl(ehci, status_reg));
+#ifdef CONFIG_ARCH_GEMINI
+ /* restart schedule */
+ ehci->command |= CMD_RUN;
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
+#endif
}
/* transfer dedicated ports to the companion hc */
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -112,8 +112,13 @@ struct ehci_regs {
u32 frame_list; /* points to periodic list */
/* ASYNCLISTADDR: offset 0x18 */
u32 async_next; /* address of next async queue head */
-
+#ifndef CONFIG_ARCH_GEMINI
u32 reserved1[2];
+#else
+ u32 reserved1;
+ /* PORTSC: offset 0x20 for Faraday OTG */
+ u32 port_status[1];
+#endif
/* TXFILLTUNING: offset 0x24 */
u32 txfill_tuning; /* TX FIFO Tuning register */
@@ -125,8 +130,11 @@ struct ehci_regs {
u32 configured_flag;
#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+#ifndef CONFIG_ARCH_GEMINI
/* PORTSC: offset 0x44 */
u32 port_status[0]; /* up to N_PORTS */
+#endif
+
/* EHCI 1.1 addendum */
#define PORTSC_SUSPEND_STS_ACK 0
#define PORTSC_SUSPEND_STS_NYET 1