openwrtv4/target/linux/omap24xx/patches-3.1/300-cbus-platform.patch
Michael Büsch 7d123a86e3 omap24xx: Add 3.1 patchset.
SVN-Revision: 28672
2011-10-29 19:02:50 +00:00

169 lines
4.2 KiB
Diff

Index: linux-3.1-rc4/arch/arm/mach-omap2/board-n8x0.c
===================================================================
--- linux-3.1-rc4.orig/arch/arm/mach-omap2/board-n8x0.c 2011-10-29 20:35:03.620973158 +0200
+++ linux-3.1-rc4/arch/arm/mach-omap2/board-n8x0.c 2011-10-29 20:35:48.268866718 +0200
@@ -15,8 +15,10 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/io.h>
#include <linux/stddef.h>
+#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
@@ -33,6 +35,7 @@
#include <plat/onenand.h>
#include <plat/mmc.h>
#include <plat/serial.h>
+#include <plat/cbus.h>
#include "mux.h"
@@ -193,6 +196,114 @@ static struct omap_onenand_platform_data
};
#endif
+#if defined(CONFIG_CBUS) || defined(CONFIG_CBUS_MODULE)
+
+static struct cbus_host_platform_data n8x0_cbus_data = {
+ .clk_gpio = 66,
+ .dat_gpio = 65,
+ .sel_gpio = 64,
+};
+
+static struct platform_device n8x0_cbus_device = {
+ .name = "cbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &n8x0_cbus_data,
+ },
+};
+
+static struct resource retu_resource[] = {
+ {
+ .start = -EINVAL, /* set later */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct cbus_retu_platform_data n8x0_retu_data = {
+ .irq_base = CBUS_RETU_IRQ_BASE,
+ .irq_end = CBUS_RETU_IRQ_END,
+ .devid = CBUS_RETU_DEVICE_ID,
+};
+
+static struct platform_device retu_device = {
+ .name = "retu",
+ .id = -1,
+ .resource = retu_resource,
+ .num_resources = ARRAY_SIZE(retu_resource),
+ .dev = {
+ .platform_data = &n8x0_retu_data,
+ },
+};
+
+static struct resource tahvo_resource[] = {
+ {
+ .start = -EINVAL, /* set later */
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device tahvo_device = {
+ .name = "tahvo",
+ .id = -1,
+ .resource = tahvo_resource,
+ .num_resources = ARRAY_SIZE(tahvo_resource),
+};
+
+static struct platform_device tahvo_usb_device = {
+ .name = "tahvo-usb",
+ .id = -1,
+};
+
+static void __init n8x0_cbus_init(void)
+{
+ int ret;
+
+ platform_device_register(&n8x0_cbus_device);
+
+ ret = gpio_request(108, "RETU irq");
+ if (ret < 0) {
+ pr_err("retu: Unable to reserve IRQ GPIO\n");
+ return;
+ }
+
+ ret = gpio_direction_input(108);
+ if (ret < 0) {
+ pr_err("retu: Unable to change gpio direction\n");
+ gpio_free(108);
+ return;
+ }
+
+ irq_set_irq_type(gpio_to_irq(108), IRQ_TYPE_EDGE_RISING);
+ retu_resource[0].start = gpio_to_irq(108);
+ platform_device_register(&retu_device);
+
+ ret = gpio_request(111, "TAHVO irq");
+ if (ret) {
+ pr_err("tahvo: Unable to reserve IRQ GPIO\n");
+ gpio_free(108);
+ return;
+ }
+
+ /* Set the pin as input */
+ ret = gpio_direction_input(111);
+ if (ret) {
+ pr_err("tahvo: Unable to change direction\n");
+ gpio_free(108);
+ gpio_free(111);
+ return;
+ }
+
+ tahvo_resource[0].start = gpio_to_irq(111);
+ platform_device_register(&tahvo_device);
+ platform_device_register(&tahvo_usb_device);
+}
+
+#else
+static inline void __init n8x0_cbus_init(void)
+{
+}
+#endif
+
#if defined(CONFIG_MENELAUS) && \
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
@@ -679,6 +790,8 @@ static inline void board_serial_init(voi
static void __init n8x0_init_machine(void)
{
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+ n8x0_cbus_init();
+
/* FIXME: add n810 spi devices */
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
Index: linux-3.1-rc4/arch/arm/plat-omap/include/plat/irqs.h
===================================================================
--- linux-3.1-rc4.orig/arch/arm/plat-omap/include/plat/irqs.h 2011-10-29 20:35:01.620977933 +0200
+++ linux-3.1-rc4/arch/arm/plat-omap/include/plat/irqs.h 2011-10-29 20:35:48.268866718 +0200
@@ -428,8 +428,16 @@
#define OMAP_GPMC_NR_IRQS 8
#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+/* CBUS */
+#define CBUS_RETU_IRQ_BASE OMAP_GPMC_IRQ_END
+#ifdef CONFIG_CBUS_RETU
+#define CBUS_RETU_NR_IRQS 16
+#else
+#define CBUS_RETU_NR_IRQS 0
+#endif
+#define CBUS_RETU_IRQ_END (CBUS_RETU_IRQ_BASE + CBUS_RETU_NR_IRQS)
-#define NR_IRQS OMAP_GPMC_IRQ_END
+#define NR_IRQS CBUS_RETU_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))