openwrtv4/target/linux/bcm53xx/patches-4.4/037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch
Rafał Miłecki a180f90518 bcm53xx: backport BCM5301X patches for SRAB
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 23:07:31 +02:00

75 lines
2.2 KiB
Diff

From 5f79985dcfec73d7a09ed99c40c28b64552518fe Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 27 Apr 2016 09:05:03 +0200
Subject: [PATCH] ARM: BCM5301X: Enable SPI-NOR on dual flash devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and
NOR flash") enabled SPI-NOR device on routers using serial flash only.
However there are also devices with two flash memories:
1) Small SPI attached flash used mostly for booting
2) Bigger NAND used mostly for storing firmware
On such devices we still need SPI-NOR e.g. to access NVRAM data.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++++
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++++
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++++
5 files changed, 20 insertions(+)
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -147,3 +147,7 @@
&usb3 {
vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -90,3 +90,7 @@
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -82,3 +82,7 @@
};
};
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -131,3 +131,7 @@
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -113,3 +113,7 @@
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};