c6c731fe31
Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
109 lines
4 KiB
Diff
109 lines
4 KiB
Diff
From 892a427f8a2b25b561298941cf1fc0373a98b269 Mon Sep 17 00:00:00 2001
|
|
From: Jisheng Zhang <jszhang@marvell.com>
|
|
Date: Wed, 16 Mar 2016 19:40:33 +0800
|
|
Subject: [PATCH 58/70] PCI: designware: Move Root Complex setup code to
|
|
dw_pcie_setup_rc()
|
|
|
|
dw_pcie_host_init() looks up host bridge resources, ioremaps them, creates
|
|
IRQ domains, and enumerates devices below the bridge. dw_pcie_setup_rc()
|
|
programs the Root Complex registers. The Root Complex may lose power
|
|
during suspend-to-RAM, and when we resume, we want to redo the latter but
|
|
not the former.
|
|
|
|
Move some Root Complex programming from dw_pcie_host_init() to
|
|
dw_pcie_setup_rc() where it belongs. DesignWare-based drivers can call
|
|
dw_pcie_setup_rc() in their resume paths.
|
|
|
|
[Niklas Cassel <niklas.cassel@axis.com>: This change moves outbound ATU
|
|
programming, which uses pp->mem_base, to dw_pcie_setup_rc(). Apply the
|
|
dra7xx pp->mem_base update before calling dw_pcie_setup_rc().]
|
|
|
|
[bhelgaas: changelog, fold in dra7xx fix from Niklas]
|
|
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
|
|
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
|
|
---
|
|
drivers/pci/host/pci-dra7xx.c | 4 ++--
|
|
drivers/pci/host/pcie-designware.c | 39 ++++++++++++++++++------------------
|
|
2 files changed, 21 insertions(+), 22 deletions(-)
|
|
|
|
--- a/drivers/pci/host/pci-dra7xx.c
|
|
+++ b/drivers/pci/host/pci-dra7xx.c
|
|
@@ -142,13 +142,13 @@ static void dra7xx_pcie_enable_interrupt
|
|
|
|
static void dra7xx_pcie_host_init(struct pcie_port *pp)
|
|
{
|
|
- dw_pcie_setup_rc(pp);
|
|
-
|
|
pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR;
|
|
pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR;
|
|
pp->cfg0_base &= DRA7XX_CPU_TO_BUS_ADDR;
|
|
pp->cfg1_base &= DRA7XX_CPU_TO_BUS_ADDR;
|
|
|
|
+ dw_pcie_setup_rc(pp);
|
|
+
|
|
dra7xx_pcie_establish_link(pp);
|
|
if (IS_ENABLED(CONFIG_PCI_MSI))
|
|
dw_pcie_msi_init(pp);
|
|
--- a/drivers/pci/host/pcie-designware.c
|
|
+++ b/drivers/pci/host/pcie-designware.c
|
|
@@ -434,7 +434,6 @@ int dw_pcie_host_init(struct pcie_port *
|
|
struct platform_device *pdev = to_platform_device(pp->dev);
|
|
struct pci_bus *bus, *child;
|
|
struct resource *cfg_res;
|
|
- u32 val;
|
|
int i, ret;
|
|
LIST_HEAD(res);
|
|
struct resource_entry *win;
|
|
@@ -544,25 +543,6 @@ int dw_pcie_host_init(struct pcie_port *
|
|
if (pp->ops->host_init)
|
|
pp->ops->host_init(pp);
|
|
|
|
- /*
|
|
- * If the platform provides ->rd_other_conf, it means the platform
|
|
- * uses its own address translation component rather than ATU, so
|
|
- * we should not program the ATU here.
|
|
- */
|
|
- if (!pp->ops->rd_other_conf)
|
|
- dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
|
|
- PCIE_ATU_TYPE_MEM, pp->mem_base,
|
|
- pp->mem_bus_addr, pp->mem_size);
|
|
-
|
|
- dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
|
|
-
|
|
- /* program correct class for RC */
|
|
- dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
|
|
-
|
|
- dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
|
|
- val |= PORT_LOGIC_SPEED_CHANGE;
|
|
- dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
|
|
-
|
|
pp->root_bus_nr = pp->busn->start;
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
bus = pci_scan_root_bus_msi(pp->dev, pp->root_bus_nr,
|
|
@@ -800,6 +780,25 @@ void dw_pcie_setup_rc(struct pcie_port *
|
|
val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
|
|
dw_pcie_writel_rc(pp, val, PCI_COMMAND);
|
|
+
|
|
+ /*
|
|
+ * If the platform provides ->rd_other_conf, it means the platform
|
|
+ * uses its own address translation component rather than ATU, so
|
|
+ * we should not program the ATU here.
|
|
+ */
|
|
+ if (!pp->ops->rd_other_conf)
|
|
+ dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
|
|
+ PCIE_ATU_TYPE_MEM, pp->mem_base,
|
|
+ pp->mem_bus_addr, pp->mem_size);
|
|
+
|
|
+ dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
|
|
+
|
|
+ /* program correct class for RC */
|
|
+ dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
|
|
+
|
|
+ dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
|
|
+ val |= PORT_LOGIC_SPEED_CHANGE;
|
|
+ dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
|
|
}
|
|
|
|
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
|