openwrtv4/target/linux/brcm63xx/patches-3.18/514-board_ct536_ct5621.patch
Jonas Gorski 387fd3ca26 brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
2014-12-01 13:27:26 +00:00

78 lines
2 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -531,6 +531,58 @@ static struct board_info __initdata boar
};
+static struct board_info __initdata board_ct536_ct5621 = {
+ .name = "CT536_CT5621",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 0,
+ .has_enet1 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
+
+ .leds = {
+ {
+ .name = "CT536_CT5621:green:adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "CT536_CT5621:green:power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ },
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 33,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
static struct board_info __initdata board_96348gw = {
.name = "96348GW",
.expected_cpu_id = 0x6348,
@@ -1794,6 +1846,7 @@ static const struct board_info __initcon
&board_96348sv,
&board_V2500V_BB,
&board_V2110,
+ &board_ct536_ct5621,
#endif
#ifdef CONFIG_BCM63XX_CPU_6358
@@ -1830,6 +1883,8 @@ static struct of_device_id const bcm963x
{ .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
{ .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
+ { .compatible = "comtrend,ct-536+", .data = &board_ct536_ct5621, },
+ { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
{ .compatible = "sagem,f@st2404", .data = &board_FAST2404, },