openwrtv4/target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch
Álvaro Fernández Rojas 525b311bf8 brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-24 13:03:39 +02:00

134 lines
4.2 KiB
Diff

From c69411a2204c088d6a695c00a7e09fac0f8c0b89 Mon Sep 17 00:00:00 2001
From: Martin Sperl <kernel@martin.sperl.org>
Date: Mon, 29 Feb 2016 11:39:21 +0000
Subject: [PATCH 259/304] clk: bcm2835: correctly enable fractional clock
support
The current driver calculates the clock divider with
fractional support enabled.
But it does not enable fractional support in the
control register itself resulting in an integer only divider,
but in clk_set_rate responds back the fractionally divided
clock frequency.
This patch enables fractional support in the control register
whenever there is a fractional bit set in the requested clock divider.
Mash clock limits are are also handled for the PWM clock
applying the correct divider limits (2 and max_int) applicable to
basic fractional divider support (mash order of 1).
It also adds locking to protect the read/modify/write cycle of
the register modification.
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the
audio domain clocks")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 959ca92a3235fc4b17c1e18483fc390b3d612254)
---
drivers/clk/bcm/clk-bcm2835.c | 45 +++++++++++++++++++++++++++++++++++++------
1 file changed, 39 insertions(+), 6 deletions(-)
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -51,6 +51,7 @@
#define CM_GNRICCTL 0x000
#define CM_GNRICDIV 0x004
# define CM_DIV_FRAC_BITS 12
+# define CM_DIV_FRAC_MASK GENMASK(CM_DIV_FRAC_BITS - 1, 0)
#define CM_VPUCTL 0x008
#define CM_VPUDIV 0x00c
@@ -128,6 +129,7 @@
# define CM_GATE BIT(CM_GATE_BIT)
# define CM_BUSY BIT(7)
# define CM_BUSYD BIT(8)
+# define CM_FRAC BIT(9)
# define CM_SRC_SHIFT 0
# define CM_SRC_BITS 4
# define CM_SRC_MASK 0xf
@@ -647,6 +649,7 @@ struct bcm2835_clock_data {
u32 frac_bits;
bool is_vpu_clock;
+ bool is_mash_clock;
};
static const char *const bcm2835_clock_per_parents[] = {
@@ -828,6 +831,7 @@ static const struct bcm2835_clock_data b
.div_reg = CM_PWMDIV,
.int_bits = 12,
.frac_bits = 12,
+ .is_mash_clock = true,
};
struct bcm2835_pll {
@@ -1192,7 +1196,7 @@ static u32 bcm2835_clock_choose_div(stru
GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1;
u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
u64 rem;
- u32 div;
+ u32 div, mindiv, maxdiv;
rem = do_div(temp, rate);
div = temp;
@@ -1202,11 +1206,23 @@ static u32 bcm2835_clock_choose_div(stru
div += unused_frac_mask + 1;
div &= ~unused_frac_mask;
- /* clamp to min divider of 1 */
- div = max_t(u32, div, 1 << CM_DIV_FRAC_BITS);
- /* clamp to the highest possible fractional divider */
- div = min_t(u32, div, GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
- CM_DIV_FRAC_BITS - data->frac_bits));
+ /* different clamping limits apply for a mash clock */
+ if (data->is_mash_clock) {
+ /* clamp to min divider of 2 */
+ mindiv = 2 << CM_DIV_FRAC_BITS;
+ /* clamp to the highest possible integer divider */
+ maxdiv = (BIT(data->int_bits) - 1) << CM_DIV_FRAC_BITS;
+ } else {
+ /* clamp to min divider of 1 */
+ mindiv = 1 << CM_DIV_FRAC_BITS;
+ /* clamp to the highest possible fractional divider */
+ maxdiv = GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
+ CM_DIV_FRAC_BITS - data->frac_bits);
+ }
+
+ /* apply the clamping limits */
+ div = max_t(u32, div, mindiv);
+ div = min_t(u32, div, maxdiv);
return div;
}
@@ -1300,9 +1316,26 @@ static int bcm2835_clock_set_rate(struct
struct bcm2835_cprman *cprman = clock->cprman;
const struct bcm2835_clock_data *data = clock->data;
u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false);
+ u32 ctl;
+
+ spin_lock(&cprman->regs_lock);
+
+ /*
+ * Setting up frac support
+ *
+ * In principle it is recommended to stop/start the clock first,
+ * but as we set CLK_SET_RATE_GATE during registration of the
+ * clock this requirement should be take care of by the
+ * clk-framework.
+ */
+ ctl = cprman_read(cprman, data->ctl_reg) & ~CM_FRAC;
+ ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
+ cprman_write(cprman, data->ctl_reg, ctl);
cprman_write(cprman, data->div_reg, div);
+ spin_unlock(&cprman->regs_lock);
+
return 0;
}