KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/mvebu/image/Makefile
Ryan Mounce 9f3f61a0d9 mvebu: add support for Turris Omnia 
Adds support for the Turris Omnia and builds an eMMC sysupgrade image in
the same format as the SolidRun ClearFog.

An initramfs image in the simple yet Omnia-specific 'medkit' image format
is also built in order to ease the initial flashing process.

Notable hardware support omissions are support for switching between SFP
cage and copper PHY, and RGB LED control.

Due to a current limitation of DSA, only 1/2 CPU switch uplinks are used.

Specifications:
- Marvell Armada 385 1.6GHz dual-core ARMv7 CPU
- 1GB DDR3 RAM
- 8GB eMMC Flash
- 5x Gigabit LAN via Marvell 88E6176 Switch (2x RGMII CPU ports)
- 1x switchable RJ45 (88E1514 PHY) / SFP SGMII WAN
- 2x USB 3.0
- 12x dimmable RGB LEDs controlled by independent MCU
- 3x Mini PCIe slots
- Optional Compex WLE200N2 Mini PCIe AR9287 2x2 802.11b/g/n (2.4GHz)
- Optional Compex WLE900VX Mini PCIe QCA9880 3x3 802.11ac (2.4 / 5GHz)
- Optional Quectel EC20 Mini PCIe LTE modem

Flash instructions:
If the U-Boot environment has been modified previously (likely manually via
serial console), first use serial to reset the default environment.
=> env default -a
=> saveenv

Method 1 - USB 'medkit' image w/o serial
- Copy openwrt-mvebu-turris-omnia-sysupgrade.img.gz and
omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz to the root of a
USB flash drive formatted with FAT32 / ext2/3/4 / btrfs / XFS.
Note that the medkit MUST be named omnia-medkit*.tar.gz
- Disconnect other USB devices from the Omnia and connect the flash drive
to either USB port.
- Power on the Omnia and hold down the rear reset button until 4 LEDs are
illuminated, then release.
- Wait approximately 2 minutes for the Turris Omnia to flash itself with
the temporary image, during which LEDs will change multiple times.
- Connect a computer to a LAN port of the Turris Omnia with a DHCP client
- (if necessary) ssh-keygen -R 192.168.1.1
- ssh root@192.168.1.1
$ mount /dev/sda1 /mnt
$ sysupgrade /mnt/openwrt-mvebu-turris-omnia-sysupgrade.img.gz
- Wait another minute for the final OpenWrt image to be flashed. The Turris
Omnia will reboot itself and you can remove the flash drive.

Method 2 - TFTP w/ serial
- Extract omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz and copy
dtb + zImage to your TFTP server (rename if desired)
- Connect Turris Omnia WAN port to DHCP-enabled network with TFTP server
- Connect serial console and interrupt U-Boot
=> dhcp
=> setenv serverip <tftp_server_ip_here>
=> tftpboot 0x01000000 zImage
=> tftpboot 0x02000000 dtb
=> bootz 0x01000000 - 0x02000000
- OpenWrt will now boot from ramdisk
- Download openwrt-mvebu-turris-omnia-sysupgrade.img.gz to /tmp/
$ sysupgrade /tmp/openwrt-mvebu-turris-omnia-sysupgrade.img.gz
- Wait another minute for the final OpenWrt image to be flashed. The Turris
Omnia will reboot itself.

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2018-03-10 01:15:21 +01:00

257 lines
7.2 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2012-2016 OpenWrt.org
# Copyright (C) 2016 LEDE-project.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
JFFS2_BLOCKSIZE = 128k
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR := 0x00008000
SIGNATURE:=$(shell printf "%.8s" $(SOURCE_DATE_EPOCH))
define Build/dtb
$(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$@.dtb)
endef
# SD-Card Images:
# these values are optimized for a 4GB labeled sdcard that actually holds 7744512 sectors of 512 byte
# MBR: 2048 sectors
# Partition 1: 32768 sectors
# Partition 2: 98304 sectors (configurable)
define Build/boot-scr
rm -f $@-boot.scr
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d $(DEVICE_NAME).bootscript $@-boot.scr
endef
define Build/boot-img
rm -f $@.boot
mkfs.fat -C $@.boot 16384
$(foreach dts,$(DEVICE_DTS), mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb ::$(dts).dtb;)
mcopy -i $@.boot $(IMAGE_KERNEL) ::zImage
-mcopy -i $@.boot $@-boot.scr ::boot.scr
endef
define Build/sdcard-img
if [ -n "$(UBOOT)" ]; then UBOOT="$(STAGING_DIR_IMAGE)/$(UBOOT)"; fi; \
ROOTFS_SIZE=$$(( $(CONFIG_TARGET_ROOTFS_PARTSIZE) * 1024 * 2 )); \
SIGNATURE="$(SIGNATURE)" \
./gen_mvebu_sdcard_img.sh $@ \
$$UBOOT \
c 32768 $@.boot \
83 $$ROOTFS_SIZE $(IMAGE_ROOTFS)
endef
define Build/omnia-medkit-initramfs
$(TAR) -c -T /dev/null -f $@
rm -rf $(dir $(IMAGE_KERNEL))boot
mkdir -p $(dir $(IMAGE_KERNEL))boot/boot/
cp $(KDIR)/zImage-initramfs $(dir $(IMAGE_KERNEL))boot/boot/zImage
cp $(DTS_DIR)/$(DEVICE_DTS).dtb $(dir $(IMAGE_KERNEL))boot/boot/dtb
$(TAR) -rp --numeric-owner --owner=0 --group=0 --sort=name \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
--file=$@ -C $(dir $(IMAGE_KERNEL))boot/ .
endef
define Device/Default
PROFILES := Default
DEVICE_DTS := $(1)
BOARD_NAME = $$(DEVICE_DTS)
KERNEL_NAME := zImage
KERNEL := kernel-bin | append-dtb | uImage none
SUPPORTED_DEVICES = $$(DEVICE_DTS)
endef
define Device/UBI
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/UBI-factory
$(Device/UBI)
UBINIZE_OPTS := -E 5
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
endef
define Device/NAND-128K
$(Device/UBI)
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
endef
define Device/NAND-256K
$(Device/UBI)
BLOCKSIZE := 256k
PAGESIZE := 4096
endef
define Device/NAND-512K
$(Device/UBI)
BLOCKSIZE := 512k
PAGESIZE := 4096
endef
define Device/linksys
DEVICE_TITLE := Linksys $(1)
DEVICE_PACKAGES := kmod-mwlwifi wpad-mini swconfig
endef
define Device/armada-385-linksys
$(Device/NAND-128K)
$(Device/UBI-factory)
KERNEL_SIZE := 6144k
endef
define Device/linksys-wrt1200ac
$(call Device/linksys,WRT1200AC (Caiman))
$(Device/armada-385-linksys)
DEVICE_DTS := armada-385-linksys-caiman
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
endef
TARGET_DEVICES += linksys-wrt1200ac
define Device/linksys-wrt1900acv2
$(call Device/linksys,WRT1900ACv2 (Cobra))
$(Device/armada-385-linksys)
DEVICE_DTS := armada-385-linksys-cobra
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
endef
TARGET_DEVICES += linksys-wrt1900acv2
define Device/linksys-wrt3200acm
$(call Device/linksys,WRT3200ACM (Rango))
$(Device/armada-385-linksys)
DEVICE_DTS := armada-385-linksys-rango
DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
endef
TARGET_DEVICES += linksys-wrt3200acm
define Device/linksys-wrt1900acs
$(call Device/linksys,WRT1900ACS (Shelby))
$(Device/armada-385-linksys)
DEVICE_DTS := armada-385-linksys-shelby
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
endef
TARGET_DEVICES += linksys-wrt1900acs
define Device/linksys-wrt1900ac
$(call Device/linksys,WRT1900AC (Mamba))
DEVICE_DTS := armada-xp-linksys-mamba
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
$(Device/NAND-128K)
$(Device/UBI-factory)
KERNEL_SIZE := 3072k
endef
TARGET_DEVICES += linksys-wrt1900ac
define Device/openblocks-ax3-4
$(Device/UBI-factory)
DEVICE_DTS := armada-xp-openblocks-ax3-4
SUPPORTED_DEVICES := $(1)
BLOCKSIZE := 128k
PAGESIZE := 1
IMAGE/factory.img := append-kernel | pad-to $$(BLOCKSIZE) | append-ubi
DEVICE_TITLE := Plat'Home OpenBlocks AX3
endef
TARGET_DEVICES += openblocks-ax3-4
define Device/armada-385-db-ap
$(Device/NAND-256K)
$(Device/UBI-factory)
KERNEL_SIZE := 8192k
DEVICE_TITLE := Marvell Armada 385 DB AP (DB-88F6820-AP)
endef
TARGET_DEVICES += armada-385-db-ap
define Device/marvell-nand
$(Device/NAND-512K)
DEVICE_TITLE := Marvell Armada $(1)
endef
define Device/armada-370-db
$(call Device/marvell-nand,370 DB (DB-88F6710-BP-DDR3))
endef
TARGET_DEVICES += armada-370-db
define Device/armada-370-rd
$(call Device/marvell-nand,370 RD (RD-88F6710-A1))
endef
TARGET_DEVICES += armada-370-rd
define Device/armada-xp-db
$(call Device/marvell-nand,XP DB (DB-78460-BP))
endef
TARGET_DEVICES += armada-xp-db
define Device/armada-xp-gp
$(call Device/marvell-nand,XP GP (DB-MV784MP-GP))
endef
TARGET_DEVICES += armada-xp-gp
define Device/armada-388-rd
DEVICE_TITLE := Marvell Armada 388 RD (RD-88F6820-AP)
IMAGES := firmware.bin
IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs
endef
TARGET_DEVICES += armada-388-rd
define Device/armada-388-clearfog-pro
KERNEL_INSTALL := 1
KERNEL := kernel-bin
DEVICE_TITLE := SolidRun ClearFog Pro
DEVICE_PACKAGES := mkf2fs e2fsprogs swconfig kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img | sdcard-img | gzip | append-metadata
DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base
SUPPORTED_DEVICES := armada-388-clearfog-pro armada-388-clearfog
UBOOT := clearfog-u-boot-spl.kwb
endef
TARGET_DEVICES += armada-388-clearfog-pro
define Device/armada-388-clearfog-base
KERNEL_INSTALL := 1
KERNEL := kernel-bin
DEVICE_TITLE := SolidRun ClearFog Base
DEVICE_PACKAGES := mkf2fs e2fsprogs kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img | sdcard-img | gzip | append-metadata
DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base
UBOOT := clearfog-u-boot-spl.kwb
endef
TARGET_DEVICES += armada-388-clearfog-base
define Device/globalscale-mirabox
$(Device/NAND-512K)
DEVICE_DTS := armada-370-mirabox
SUPPORTED_DEVICES := mirabox
DEVICE_TITLE := Globalscale Mirabox
endef
TARGET_DEVICES += globalscale-mirabox
define Device/turris-omnia
KERNEL_INSTALL := 1
KERNEL := kernel-bin
KERNEL_INITRAMFS := kernel-bin
DEVICE_TITLE := Turris Omnia
DEVICE_PACKAGES := \
mkf2fs e2fsprogs kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \
wpad-mini kmod-ath9k kmod-ath10k ath10k-firmware-qca988x
IMAGES := $$(IMAGE_PREFIX)-sysupgrade.img.gz omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz
IMAGE/$$(IMAGE_PREFIX)-sysupgrade.img.gz := boot-img | sdcard-img | gzip | append-metadata
IMAGE/omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz := omnia-medkit-initramfs | gzip
IMAGE_NAME = $$(2)
DEVICE_DTS := armada-385-turris-omnia
UBOOT :=
endef
TARGET_DEVICES += turris-omnia
$(eval $(call BuildImage))
Reference in a new issue View git blame Copy permalink