openwrtv4/target/linux/ipq806x/patches/0170-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
John Crispin 3c1f6e358d ipq806x: Add support for IPQ806x chip family
Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.

All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.

Support is currently limited to AP148 board but can be extended to other
platforms in the future.

These changes do not cover ethernet connectivity.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 42334
2014-08-30 09:32:58 +00:00

171 lines
4.8 KiB
Diff

From 67a9d5a02b178644da624ef9c32b4e6abb2c4f6e Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Wed, 18 Jun 2014 14:25:41 -0700
Subject: [PATCH 170/182] clk: qcom: Add KPSS ACC/GCC driver
The ACC and GCC regions present in KPSSv1 contain registers to
control clocks and power to each Krait CPU and L2. For CPUfreq
purposes probe these devices and expose a mux clock that chooses
between PXO and PLL8.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 8 +++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/kpss-xcc.c | 115 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 124 insertions(+)
create mode 100644 drivers/clk/qcom/kpss-xcc.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 70b6a7c..e9e5360 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -62,6 +62,14 @@ config QCOM_HFPLL
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
+config KPSS_XCC
+ tristate "KPSS Clock Controller"
+ depends on COMMON_CLK_QCOM
+ help
+ Support for the Krait ACC and GCC clock controllers. Say Y
+ if you want to support CPU frequency scaling on devices such
+ as MSM8960, APQ8064, etc.
+
config KRAIT_CLOCKS
bool
select KRAIT_L2_ACCESSORS
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 6482165..29b2a45 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -17,4 +17,5 @@ obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/kpss-xcc.c b/drivers/clk/qcom/kpss-xcc.c
new file mode 100644
index 0000000..1061668
--- /dev/null
+++ b/drivers/clk/qcom/kpss-xcc.c
@@ -0,0 +1,115 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/msm-clk-generic.h>
+
+static int kpss_xcc_set_mux_sel(struct mux_clk *clk, int sel)
+{
+ writel_relaxed(sel, clk->base + clk->offset);
+ return 0;
+}
+
+static int kpss_xcc_get_mux_sel(struct mux_clk *clk)
+{
+ return readl_relaxed(clk->base + clk->offset);
+}
+
+static const struct clk_mux_ops kpss_xcc_ops = {
+ .set_mux_sel = kpss_xcc_set_mux_sel,
+ .get_mux_sel = kpss_xcc_get_mux_sel,
+};
+
+static const char *aux_parents[] = {
+ "pll8_vote",
+ "pxo",
+};
+
+static u8 aux_parent_map[] = {
+ 3,
+ 0,
+};
+
+static const struct of_device_id kpss_xcc_match_table[] = {
+ { .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL },
+ { .compatible = "qcom,kpss-gcc" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, kpss_xcc_match_table);
+
+static int kpss_xcc_driver_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *id;
+ struct clk *clk;
+ struct resource *res;
+ void __iomem *base;
+ struct mux_clk *mux_clk;
+ struct clk_init_data init = {
+ .parent_names = aux_parents,
+ .num_parents = 2,
+ .ops = &clk_ops_gen_mux,
+ };
+
+ id = of_match_device(kpss_xcc_match_table, &pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ mux_clk = devm_kzalloc(&pdev->dev, sizeof(*mux_clk), GFP_KERNEL);
+ if (!mux_clk)
+ return -ENOMEM;
+
+ mux_clk->mask = 0x3;
+ mux_clk->parent_map = aux_parent_map;
+ mux_clk->ops = &kpss_xcc_ops;
+ mux_clk->base = base;
+ mux_clk->hw.init = &init;
+
+ if (id->data) {
+ if (of_property_read_string_index(pdev->dev.of_node,
+ "clock-output-names", 0, &init.name))
+ return -ENODEV;
+ mux_clk->offset = 0x14;
+ } else {
+ init.name = "acpu_l2_aux";
+ mux_clk->offset = 0x28;
+ }
+
+ clk = devm_clk_register(&pdev->dev, &mux_clk->hw);
+
+ return PTR_ERR_OR_ZERO(clk);
+}
+
+static struct platform_driver kpss_xcc_driver = {
+ .probe = kpss_xcc_driver_probe,
+ .driver = {
+ .name = "kpss-xcc",
+ .of_match_table = kpss_xcc_match_table,
+ .owner = THIS_MODULE,
+ },
+};
+module_platform_driver(kpss_xcc_driver);
+
+MODULE_LICENSE("GPL v2");
--
1.7.10.4