openwrtv4/target/linux/ramips/dts/RT5350F-OLINUXINO.dtsi
Zoltan Gyarmati 6a5b62f503 ramips: RT5350F-OLINUXINO: enable ttyS1
The RT5350F's second UART pins are available on the base module and on
the EVB as well, so enable it in the device tree.
 In order to keep the origian serial port numbering (ttyS0 is the serial
console), aliases added for the UART devices.

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-09-28 09:20:36 +02:00

94 lines
1.2 KiB
Text

#include "rt5350.dtsi"
/ {
compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
aliases {
serial0 = &uartlite;
serial1 = &uart;
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&gpio1 {
status = "okay";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "jtag", "rgmii", "mdio";
ralink,function = "gpio";
};
uartf_gpio {
ralink,group = "uartf";
ralink,function = "gpio uartf";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&esw {
mediatek,portmap = <0x2f>;
mediatek,led_polarity = <0x17>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
ralink,led-polarity = <1>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&i2c {
status = "okay";
};
&uart {
status = "okay";
};