Piotr Dymacz 90d8c0f0a2 ar71xx: add support for GL.iNet GL-USB150 ... GL.iNet GL-USB150 is an USB dongle WiFi router, based on Atheros AR9331. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - Realtek RTL8152B USB to Ethernet bridge (connected with AR9331 PHY4) - 1T1R 2.4 GHz - 2x LED, 1x button - UART header on PCB Flash instruction: Vendor firmware is based on OpenWrt CC. GUI or sysupgrade can be used to flash LEDE firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2017-09-10 22:14:43 +02:00
..
lzma-loader	ar71xx/lzma-loader: fix O32 ABI conformance	2016-01-17 15:29:03 +00:00
generic.mk	ar71xx: add support for GL.iNet GL-USB150	2017-09-10 22:14:43 +02:00
legacy-devices.mk	ar71xx: move Arduino Yun to generic building code	2017-06-29 10:37:36 +02:00
legacy.mk	ar71xx: move Arduino Yun to generic building code	2017-06-29 10:37:36 +02:00
Makefile	ar71xx: image: use simply expanded variables	2017-06-11 21:32:17 +02:00
mikrotik.mk	ar71xx: image: mikrotik: shorten DEVICE_TITLE	2017-06-11 21:32:17 +02:00
nand.mk	ar71xx: image: use simply expanded variables	2017-06-11 21:32:17 +02:00
senao.mk	ar71xx: fix EnGenius ENS202EXT mtd definition	2017-06-29 10:37:36 +02:00
tp-link.mk	ar71xx: image: use tplink-v1-header in place of mktplinkfw-kernel	2017-07-22 23:29:50 +02:00
ubinize-nbg6716.ini	ar71xx: nbg6716: Enable procd nand sysupgrage	2014-06-26 11:43:38 +00:00
ubinize-wndr4300.ini	ar71xx: remove old jffs2 marker from image generation on nand targets	2014-06-24 18:14:18 +00:00
ubnt.mk	ar71xx/image: change unifi UBNT_CHIP to ar7240	2017-07-13 23:56:24 +02:00