openwrtv4

No description

Find a file

Florian Fainelli 8ceff55a08 fix typos against the gpio buttons driver (#5804 ) SVN-Revision: 17538		2009-09-07 18:17:45 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	now that $(BOARD) is part of the opkg ARCH, there's no reason to keep the board name around in kmod-* package versions anymore	2009-09-06 17:26:37 +00:00
package	move ppp ifname fixup from pppoe.sh to ppp.sh, so that it applies to all other ppp based protocols as well	2009-09-06 17:36:01 +00:00
scripts	scripts/feeds: fix an error message	2009-08-31 14:28:24 +00:00
target	fix typos against the gpio buttons driver (#5804 )	2009-09-07 18:17:45 +00:00
toolchain	uclibc: to rebuild libc.so.0, mklibs.py needs access to libc_so.a which was not exported by default. use it instead of libc_pic.a	2009-08-29 11:56:27 +00:00
tools	firmware-utils: raise the default trx image size limit for something more appropriate for devices with 8M flash	2009-09-07 13:55:02 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	do not forcibly disable stripping when selecting CONFIG_DEBUG, debugging symbols can be useful even if they are not put on the device (e.g. remote cross-gdb)	2009-09-06 19:56:54 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
rules.mk	move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	2009-08-20 15:31:17 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org