openwrtv4/target/linux/ramips/dts/MZK-EX300NP.dts
Stanislav Galabov 9195d8da35 ramips: DTS rework
Add node aliases to dtsi files.
Reword dts files so they're more in-line with upstream.
Fix some more warnings and errors reported by dtc

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-12 03:29:35 +02:00

130 lines
1.9 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Planex MZK-EX300NP";
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "mzk-ex300np:green:wifi";
gpios = <&gpio3 0 1>;
};
wps {
label = "mzk-ex300np:green:wps";
gpios = <&gpio1 5 1>;
};
rep {
label = "mzk-ex300np:blue:rep";
gpios = <&gpio1 4 1>;
};
wifi1 {
label = "mzk-ex300np:blue:wifi1";
gpios = <&gpio1 1 1>;
};
wifi2 {
label = "mzk-ex300np:blue:wifi2";
gpios = <&gpio1 2 1>;
};
wifi3 {
label = "mzk-ex300np:blue:wifi3";
gpios = <&gpio1 0 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio1 3 0>;
linux,code = <0x211>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80", "w25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x730000>;
};
partition@780000 {
label = "Udata";
reg = <0x780000 0x80000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
ralink,function = "gpio";
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};