openwrtv4/target/linux/brcm-2.4/files/arch/mips/bcm947xx/pcibios.c
Imre Kaloz 88041e0f1b final fix for BCM5354 USB cores, hopefully
SVN-Revision: 12499
2008-09-02 11:28:57 +00:00

415 lines
10 KiB
C

/*
* Low-Level PCI and SB support for BCM47xx (Linux support code)
*
* Copyright 2006, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id: pcibios.c,v 1.1.1.9 2006/02/27 03:42:55 honor Exp $
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/paccess.h>
#include <typedefs.h>
#include <osl.h>
#include <sbconfig.h>
#include <sbutils.h>
#include <hndpci.h>
#include <pcicfg.h>
#include <bcmdevs.h>
#include <bcmnvram.h>
/* Global SB handle */
extern sb_t *bcm947xx_sbh;
extern spinlock_t bcm947xx_sbh_lock;
/* Convenience */
#define sbh bcm947xx_sbh
#define sbh_lock bcm947xx_sbh_lock
static int
sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&sbh_lock, flags);
ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, value, sizeof(*value));
spin_unlock_irqrestore(&sbh_lock, flags);
return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
}
static int
sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&sbh_lock, flags);
ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, value, sizeof(*value));
spin_unlock_irqrestore(&sbh_lock, flags);
return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
}
static int
sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&sbh_lock, flags);
ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, value, sizeof(*value));
spin_unlock_irqrestore(&sbh_lock, flags);
return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
}
static int
sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&sbh_lock, flags);
ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, &value, sizeof(value));
spin_unlock_irqrestore(&sbh_lock, flags);
return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
}
static int
sbpci_write_config_word(struct pci_dev *dev, int where, u16 value)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&sbh_lock, flags);
ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, &value, sizeof(value));
spin_unlock_irqrestore(&sbh_lock, flags);
return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
}
static int
sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&sbh_lock, flags);
ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), where, &value, sizeof(value));
spin_unlock_irqrestore(&sbh_lock, flags);
return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
}
static struct pci_ops pcibios_ops = {
sbpci_read_config_byte,
sbpci_read_config_word,
sbpci_read_config_dword,
sbpci_write_config_byte,
sbpci_write_config_word,
sbpci_write_config_dword
};
void __init
pcibios_init(void)
{
ulong flags;
if (!(sbh = sb_kattach(SB_OSH)))
panic("sb_kattach failed");
spin_lock_init(&sbh_lock);
spin_lock_irqsave(&sbh_lock, flags);
sbpci_init(sbh);
spin_unlock_irqrestore(&sbh_lock, flags);
set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000));
mdelay(300); /* workaround for atheros cards */
/* Scan the SB bus */
pci_scan_bus(0, &pcibios_ops, NULL);
}
char * __init
pcibios_setup(char *str)
{
if (!strncmp(str, "ban=", 4)) {
sbpci_ban(simple_strtoul(str + 4, NULL, 0));
return NULL;
}
return (str);
}
static u32 pci_iobase = 0x100;
static u32 pci_membase = SB_PCI_DMA;
static u32 pcmcia_membase = 0x40004000;
void __init
pcibios_fixup_bus(struct pci_bus *b)
{
struct list_head *ln;
struct pci_dev *d;
struct resource *res;
int pos, size;
u32 *base;
u8 irq;
printk("PCI: Fixing up bus %d\n", b->number);
/* Fix up SB */
if (b->number == 0) {
for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
d = pci_dev_b(ln);
/* Fix up interrupt lines */
pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq);
d->irq = irq + 2;
pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
}
}
/* Fix up external PCI */
else {
for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
d = pci_dev_b(ln);
/* Fix up resource bases */
for (pos = 0; pos < 6; pos++) {
res = &d->resource[pos];
base = (res->flags & IORESOURCE_IO) ? &pci_iobase : ((b->number == 2) ? &pcmcia_membase : &pci_membase);
if (res->end) {
size = res->end - res->start + 1;
if (*base & (size - 1))
*base = (*base + size) & ~(size - 1);
res->start = *base;
res->end = res->start + size - 1;
*base += size;
pci_write_config_dword(d,
PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
}
/* Fix up PCI bridge BAR0 only */
if (b->number == 1 && PCI_SLOT(d->devfn) == 0)
break;
}
/* Fix up interrupt lines */
if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))
d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq;
pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
}
}
}
unsigned int
pcibios_assign_all_busses(void)
{
return 1;
}
void
pcibios_align_resource(void *data, struct resource *res,
unsigned long size, unsigned long align)
{
}
int
pcibios_enable_resources(struct pci_dev *dev)
{
u16 cmd, old_cmd;
int idx;
struct resource *r;
/* External PCI only */
if (dev->bus->number == 0)
return 0;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
for (idx = 0; idx < 6; idx++) {
r = &dev->resource[idx];
if (r->flags & IORESOURCE_IO)
cmd |= PCI_COMMAND_IO;
if (r->flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
if (dev->resource[PCI_ROM_RESOURCE].start)
cmd |= PCI_COMMAND_MEMORY;
if (cmd != old_cmd) {
printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
}
int
pcibios_enable_device(struct pci_dev *dev, int mask)
{
ulong flags;
uint coreidx;
void *regs;
/* External PCI device enable */
if (dev->bus->number != 0)
return pcibios_enable_resources(dev);
/* These cores come out of reset enabled */
if (dev->device == SB_MIPS ||
dev->device == SB_MIPS33 ||
dev->device == SB_EXTIF ||
dev->device == SB_CC)
return 0;
spin_lock_irqsave(&sbh_lock, flags);
coreidx = sb_coreidx(sbh);
regs = sb_setcoreidx(sbh, PCI_SLOT(dev->devfn));
if (!regs)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* The USB core requires a special bit to be set during core
* reset to enable host (OHCI) mode. Resetting the SB core in
* pcibios_enable_device() is a hack for compatibility with
* vanilla usb-ohci so that it does not have to know about
* SB. A driver that wants to use the USB core in device mode
* should know about SB and should reset the bit back to 0
* after calling pcibios_enable_device().
*/
if (sb_coreid(sbh) == SB_USB) {
printk(KERN_INFO "SB USB 1.1 init\n");
sb_core_disable(sbh, sb_coreflags(sbh, 0, 0));
sb_core_reset(sbh, 1 << 29, 0);
}
/*
* USB 2.0 special considerations:
*
* 1. Since the core supports both OHCI and EHCI functions, it must
* only be reset once.
*
* 2. In addition to the standard SB reset sequence, the Host Control
* Register must be programmed to bring the USB core and various
* phy components out of reset.
*/
else if (sb_coreid(sbh) == SB_USB20H) {
uint corerev = sb_corerev(sbh);
printk(KERN_INFO "SB USB20H init\n");
printk(KERN_INFO "SB COREREV: %d\n", corerev);
if (!sb_iscoreup(sbh)) {
printk(KERN_INFO "SB USB20H resetting\n");
sb_core_reset(sbh, 0, 0);
writel(0x7FF, (ulong)regs + 0x200);
udelay(1);
}
/* PRxxxx: War for 5354 failures. */
if (corerev == 1 || corerev == 2) {
uint32 tmp;
/* Change Flush control reg */
tmp = readl((uintptr)regs + 0x400);
tmp &= ~8;
writel(tmp, (uintptr)regs + 0x400);
tmp = readl((uintptr)regs + 0x400);
printk(KERN_INFO "USB20H fcr: 0x%x\n", tmp);
/* Change Shim control reg */
tmp = readl((uintptr)regs + 0x304);
tmp &= ~0x100;
writel(tmp, (uintptr)regs + 0x304);
tmp = readl((uintptr)regs + 0x304);
printk(KERN_INFO "USB20H shim cr: 0x%x\n", tmp);
}
} else
sb_core_reset(sbh, 0, 0);
sb_setcoreidx(sbh, coreidx);
spin_unlock_irqrestore(&sbh_lock, flags);
return 0;
}
void
pcibios_update_resource(struct pci_dev *dev, struct resource *root,
struct resource *res, int resource)
{
unsigned long where, size;
u32 reg;
/* External PCI only */
if (dev->bus->number == 0)
return;
where = PCI_BASE_ADDRESS_0 + (resource * 4);
size = res->end - res->start;
pci_read_config_dword(dev, where, &reg);
if (dev->bus->number == 1)
reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
else
reg = res->start;
pci_write_config_dword(dev, where, reg);
}
static void __init
quirk_sbpci_bridge(struct pci_dev *dev)
{
if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0)
return;
printk("PCI: Fixing up bridge\n");
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
pcibios_enable_resources(dev);
/* Enable PCI bridge BAR1 prefetch and burst */
pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3);
}
struct pci_fixup pcibios_fixups[] = {
{ PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge },
{ 0 }
};
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain crappy BIOSes forget to set it properly.
*/
unsigned int pcibios_max_latency = 255;
void pcibios_set_master(struct pci_dev *dev)
{
u8 lat;
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
if (lat < 16)
lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
else if (lat > pcibios_max_latency)
lat = pcibios_max_latency;
else
return;
printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}