KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
No description
20239 commits 3 branches 0 tags 154 MiB
Find a file
Mirko Vogt 87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board 
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
2012-04-21 08:07:21 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include kernel: update linux 3.3 to 3.3.2 2012-04-17 12:51:02 +00:00
package e2fsprogs: fix status reaping with fsck piped to logger, based on patch by Lukasz Golec-Biernat <mojedokumenty+openwrt@gmail.com> 2012-04-20 15:18:17 +00:00
scripts allow arbitary folder layout when using localmirrors 2012-04-10 14:11:45 +00:00
target change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board 2012-04-21 08:07:21 +00:00
toolchain gcc: add patch to make the getenv() spec function nonfatal if requested environment variable is unset 2012-04-21 03:02:39 +00:00
tools mklibs: revert r31315 2012-04-16 15:35:45 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in make xz ramdisk images also available for 2.6.39+ 2012-04-18 15:14:05 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
rules.mk Use build suffix on build_dir paths 2012-04-10 10:55:55 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org