openwrtv4/target/linux/ramips/dts/RT-N10-PLUS.dts
Stanislav Galabov f8b6c9d825 ramips: Change all '/include/' clauses to '#include' so preprocessing can
be done properly for the entire device trees.

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-10 10:43:17 +02:00

80 lines
1.2 KiB
Text

/dts-v1/;
#include "rt3050.dtsi"
/ {
compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
model = "Asus RT-N10+";
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "devdata";
reg = <0x30000 0x10000>;
read-only;
};
devconf: partition@40000 {
label = "devconf";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
ethernet@10100000 {
mtd-mac-address = <&devconf 0x4>;
};
esw@10110000 {
mediatek,portmap = <0x3e>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&devconf 0>;
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "rt-n10-plus:green:wps";
gpios = <&gpio0 14 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
};
};