3a03c08c82
Combine all bus operations for one MMD access in one function. Protecting all these bus operations with one lock also helps to avoid potential issues due to bus operations intercepting the register and data write. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48914
1440 lines
34 KiB
C
1440 lines
34 KiB
C
/*
|
|
* ar8327.c: AR8216 switch driver
|
|
*
|
|
* Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
|
|
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/switch.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/lockdep.h>
|
|
#include <linux/ar8216_platform.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/mdio.h>
|
|
|
|
#include "ar8216.h"
|
|
#include "ar8327.h"
|
|
|
|
extern const struct ar8xxx_mib_desc ar8236_mibs[39];
|
|
extern const struct switch_attr ar8xxx_sw_attr_vlan[1];
|
|
|
|
static u32
|
|
ar8327_get_pad_cfg(struct ar8327_pad_cfg *cfg)
|
|
{
|
|
u32 t;
|
|
|
|
if (!cfg)
|
|
return 0;
|
|
|
|
t = 0;
|
|
switch (cfg->mode) {
|
|
case AR8327_PAD_NC:
|
|
break;
|
|
|
|
case AR8327_PAD_MAC2MAC_MII:
|
|
t = AR8327_PAD_MAC_MII_EN;
|
|
if (cfg->rxclk_sel)
|
|
t |= AR8327_PAD_MAC_MII_RXCLK_SEL;
|
|
if (cfg->txclk_sel)
|
|
t |= AR8327_PAD_MAC_MII_TXCLK_SEL;
|
|
break;
|
|
|
|
case AR8327_PAD_MAC2MAC_GMII:
|
|
t = AR8327_PAD_MAC_GMII_EN;
|
|
if (cfg->rxclk_sel)
|
|
t |= AR8327_PAD_MAC_GMII_RXCLK_SEL;
|
|
if (cfg->txclk_sel)
|
|
t |= AR8327_PAD_MAC_GMII_TXCLK_SEL;
|
|
break;
|
|
|
|
case AR8327_PAD_MAC_SGMII:
|
|
t = AR8327_PAD_SGMII_EN;
|
|
|
|
/*
|
|
* WAR for the QUalcomm Atheros AP136 board.
|
|
* It seems that RGMII TX/RX delay settings needs to be
|
|
* applied for SGMII mode as well, The ethernet is not
|
|
* reliable without this.
|
|
*/
|
|
t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
|
|
t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
|
|
if (cfg->rxclk_delay_en)
|
|
t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
|
|
if (cfg->txclk_delay_en)
|
|
t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
|
|
|
|
if (cfg->sgmii_delay_en)
|
|
t |= AR8327_PAD_SGMII_DELAY_EN;
|
|
|
|
break;
|
|
|
|
case AR8327_PAD_MAC2PHY_MII:
|
|
t = AR8327_PAD_PHY_MII_EN;
|
|
if (cfg->rxclk_sel)
|
|
t |= AR8327_PAD_PHY_MII_RXCLK_SEL;
|
|
if (cfg->txclk_sel)
|
|
t |= AR8327_PAD_PHY_MII_TXCLK_SEL;
|
|
break;
|
|
|
|
case AR8327_PAD_MAC2PHY_GMII:
|
|
t = AR8327_PAD_PHY_GMII_EN;
|
|
if (cfg->pipe_rxclk_sel)
|
|
t |= AR8327_PAD_PHY_GMII_PIPE_RXCLK_SEL;
|
|
if (cfg->rxclk_sel)
|
|
t |= AR8327_PAD_PHY_GMII_RXCLK_SEL;
|
|
if (cfg->txclk_sel)
|
|
t |= AR8327_PAD_PHY_GMII_TXCLK_SEL;
|
|
break;
|
|
|
|
case AR8327_PAD_MAC_RGMII:
|
|
t = AR8327_PAD_RGMII_EN;
|
|
t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
|
|
t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
|
|
if (cfg->rxclk_delay_en)
|
|
t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
|
|
if (cfg->txclk_delay_en)
|
|
t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
|
|
break;
|
|
|
|
case AR8327_PAD_PHY_GMII:
|
|
t = AR8327_PAD_PHYX_GMII_EN;
|
|
break;
|
|
|
|
case AR8327_PAD_PHY_RGMII:
|
|
t = AR8327_PAD_PHYX_RGMII_EN;
|
|
break;
|
|
|
|
case AR8327_PAD_PHY_MII:
|
|
t = AR8327_PAD_PHYX_MII_EN;
|
|
break;
|
|
}
|
|
|
|
return t;
|
|
}
|
|
|
|
static void
|
|
ar8327_phy_fixup(struct ar8xxx_priv *priv, int phy)
|
|
{
|
|
switch (priv->chip_rev) {
|
|
case 1:
|
|
/* For 100M waveform */
|
|
ar8xxx_phy_dbg_write(priv, phy, 0, 0x02ea);
|
|
/* Turn on Gigabit clock */
|
|
ar8xxx_phy_dbg_write(priv, phy, 0x3d, 0x68a0);
|
|
break;
|
|
|
|
case 2:
|
|
ar8xxx_phy_mmd_write(priv, phy, 0x7, 0x3c, 0x0);
|
|
/* fallthrough */
|
|
case 4:
|
|
ar8xxx_phy_mmd_write(priv, phy, 0x3, 0x800d, 0x803f);
|
|
ar8xxx_phy_dbg_write(priv, phy, 0x3d, 0x6860);
|
|
ar8xxx_phy_dbg_write(priv, phy, 0x5, 0x2c46);
|
|
ar8xxx_phy_dbg_write(priv, phy, 0x3c, 0x6000);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static u32
|
|
ar8327_get_port_init_status(struct ar8327_port_cfg *cfg)
|
|
{
|
|
u32 t;
|
|
|
|
if (!cfg->force_link)
|
|
return AR8216_PORT_STATUS_LINK_AUTO;
|
|
|
|
t = AR8216_PORT_STATUS_TXMAC | AR8216_PORT_STATUS_RXMAC;
|
|
t |= cfg->duplex ? AR8216_PORT_STATUS_DUPLEX : 0;
|
|
t |= cfg->rxpause ? AR8216_PORT_STATUS_RXFLOW : 0;
|
|
t |= cfg->txpause ? AR8216_PORT_STATUS_TXFLOW : 0;
|
|
|
|
switch (cfg->speed) {
|
|
case AR8327_PORT_SPEED_10:
|
|
t |= AR8216_PORT_SPEED_10M;
|
|
break;
|
|
case AR8327_PORT_SPEED_100:
|
|
t |= AR8216_PORT_SPEED_100M;
|
|
break;
|
|
case AR8327_PORT_SPEED_1000:
|
|
t |= AR8216_PORT_SPEED_1000M;
|
|
break;
|
|
}
|
|
|
|
return t;
|
|
}
|
|
|
|
#define AR8327_LED_ENTRY(_num, _reg, _shift) \
|
|
[_num] = { .reg = (_reg), .shift = (_shift) }
|
|
|
|
static const struct ar8327_led_entry
|
|
ar8327_led_map[AR8327_NUM_LEDS] = {
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY0_0, 0, 14),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY0_1, 1, 14),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY0_2, 2, 14),
|
|
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY1_0, 3, 8),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY1_1, 3, 10),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY1_2, 3, 12),
|
|
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY2_0, 3, 14),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY2_1, 3, 16),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY2_2, 3, 18),
|
|
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY3_0, 3, 20),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY3_1, 3, 22),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY3_2, 3, 24),
|
|
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY4_0, 0, 30),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY4_1, 1, 30),
|
|
AR8327_LED_ENTRY(AR8327_LED_PHY4_2, 2, 30),
|
|
};
|
|
|
|
static void
|
|
ar8327_set_led_pattern(struct ar8xxx_priv *priv, unsigned int led_num,
|
|
enum ar8327_led_pattern pattern)
|
|
{
|
|
const struct ar8327_led_entry *entry;
|
|
|
|
entry = &ar8327_led_map[led_num];
|
|
ar8xxx_rmw(priv, AR8327_REG_LED_CTRL(entry->reg),
|
|
(3 << entry->shift), pattern << entry->shift);
|
|
}
|
|
|
|
static void
|
|
ar8327_led_work_func(struct work_struct *work)
|
|
{
|
|
struct ar8327_led *aled;
|
|
u8 pattern;
|
|
|
|
aled = container_of(work, struct ar8327_led, led_work);
|
|
|
|
spin_lock(&aled->lock);
|
|
pattern = aled->pattern;
|
|
spin_unlock(&aled->lock);
|
|
|
|
ar8327_set_led_pattern(aled->sw_priv, aled->led_num,
|
|
pattern);
|
|
}
|
|
|
|
static void
|
|
ar8327_led_schedule_change(struct ar8327_led *aled, u8 pattern)
|
|
{
|
|
if (aled->pattern == pattern)
|
|
return;
|
|
|
|
aled->pattern = pattern;
|
|
schedule_work(&aled->led_work);
|
|
}
|
|
|
|
static inline struct ar8327_led *
|
|
led_cdev_to_ar8327_led(struct led_classdev *led_cdev)
|
|
{
|
|
return container_of(led_cdev, struct ar8327_led, cdev);
|
|
}
|
|
|
|
static int
|
|
ar8327_led_blink_set(struct led_classdev *led_cdev,
|
|
unsigned long *delay_on,
|
|
unsigned long *delay_off)
|
|
{
|
|
struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
|
|
|
|
if (*delay_on == 0 && *delay_off == 0) {
|
|
*delay_on = 125;
|
|
*delay_off = 125;
|
|
}
|
|
|
|
if (*delay_on != 125 || *delay_off != 125) {
|
|
/*
|
|
* The hardware only supports blinking at 4Hz. Fall back
|
|
* to software implementation in other cases.
|
|
*/
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock(&aled->lock);
|
|
|
|
aled->enable_hw_mode = false;
|
|
ar8327_led_schedule_change(aled, AR8327_LED_PATTERN_BLINK);
|
|
|
|
spin_unlock(&aled->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ar8327_led_set_brightness(struct led_classdev *led_cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
|
|
u8 pattern;
|
|
bool active;
|
|
|
|
active = (brightness != LED_OFF);
|
|
active ^= aled->active_low;
|
|
|
|
pattern = (active) ? AR8327_LED_PATTERN_ON :
|
|
AR8327_LED_PATTERN_OFF;
|
|
|
|
spin_lock(&aled->lock);
|
|
|
|
aled->enable_hw_mode = false;
|
|
ar8327_led_schedule_change(aled, pattern);
|
|
|
|
spin_unlock(&aled->lock);
|
|
}
|
|
|
|
static ssize_t
|
|
ar8327_led_enable_hw_mode_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
|
|
ssize_t ret = 0;
|
|
|
|
spin_lock(&aled->lock);
|
|
ret += sprintf(buf, "%d\n", aled->enable_hw_mode);
|
|
spin_unlock(&aled->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t
|
|
ar8327_led_enable_hw_mode_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t size)
|
|
{
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
|
|
u8 pattern;
|
|
u8 value;
|
|
int ret;
|
|
|
|
ret = kstrtou8(buf, 10, &value);
|
|
if (ret < 0)
|
|
return -EINVAL;
|
|
|
|
spin_lock(&aled->lock);
|
|
|
|
aled->enable_hw_mode = !!value;
|
|
if (aled->enable_hw_mode)
|
|
pattern = AR8327_LED_PATTERN_RULE;
|
|
else
|
|
pattern = AR8327_LED_PATTERN_OFF;
|
|
|
|
ar8327_led_schedule_change(aled, pattern);
|
|
|
|
spin_unlock(&aled->lock);
|
|
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR(enable_hw_mode, S_IRUGO | S_IWUSR,
|
|
ar8327_led_enable_hw_mode_show,
|
|
ar8327_led_enable_hw_mode_store);
|
|
|
|
static int
|
|
ar8327_led_register(struct ar8327_led *aled)
|
|
{
|
|
int ret;
|
|
|
|
ret = led_classdev_register(NULL, &aled->cdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (aled->mode == AR8327_LED_MODE_HW) {
|
|
ret = device_create_file(aled->cdev.dev,
|
|
&dev_attr_enable_hw_mode);
|
|
if (ret)
|
|
goto err_unregister;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unregister:
|
|
led_classdev_unregister(&aled->cdev);
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ar8327_led_unregister(struct ar8327_led *aled)
|
|
{
|
|
if (aled->mode == AR8327_LED_MODE_HW)
|
|
device_remove_file(aled->cdev.dev, &dev_attr_enable_hw_mode);
|
|
|
|
led_classdev_unregister(&aled->cdev);
|
|
cancel_work_sync(&aled->led_work);
|
|
}
|
|
|
|
static int
|
|
ar8327_led_create(struct ar8xxx_priv *priv,
|
|
const struct ar8327_led_info *led_info)
|
|
{
|
|
struct ar8327_data *data = priv->chip_data;
|
|
struct ar8327_led *aled;
|
|
int ret;
|
|
|
|
if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
|
|
return 0;
|
|
|
|
if (!led_info->name)
|
|
return -EINVAL;
|
|
|
|
if (led_info->led_num >= AR8327_NUM_LEDS)
|
|
return -EINVAL;
|
|
|
|
aled = kzalloc(sizeof(*aled) + strlen(led_info->name) + 1,
|
|
GFP_KERNEL);
|
|
if (!aled)
|
|
return -ENOMEM;
|
|
|
|
aled->sw_priv = priv;
|
|
aled->led_num = led_info->led_num;
|
|
aled->active_low = led_info->active_low;
|
|
aled->mode = led_info->mode;
|
|
|
|
if (aled->mode == AR8327_LED_MODE_HW)
|
|
aled->enable_hw_mode = true;
|
|
|
|
aled->name = (char *)(aled + 1);
|
|
strcpy(aled->name, led_info->name);
|
|
|
|
aled->cdev.name = aled->name;
|
|
aled->cdev.brightness_set = ar8327_led_set_brightness;
|
|
aled->cdev.blink_set = ar8327_led_blink_set;
|
|
aled->cdev.default_trigger = led_info->default_trigger;
|
|
|
|
spin_lock_init(&aled->lock);
|
|
mutex_init(&aled->mutex);
|
|
INIT_WORK(&aled->led_work, ar8327_led_work_func);
|
|
|
|
ret = ar8327_led_register(aled);
|
|
if (ret)
|
|
goto err_free;
|
|
|
|
data->leds[data->num_leds++] = aled;
|
|
|
|
return 0;
|
|
|
|
err_free:
|
|
kfree(aled);
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ar8327_led_destroy(struct ar8327_led *aled)
|
|
{
|
|
ar8327_led_unregister(aled);
|
|
kfree(aled);
|
|
}
|
|
|
|
static void
|
|
ar8327_leds_init(struct ar8xxx_priv *priv)
|
|
{
|
|
struct ar8327_data *data = priv->chip_data;
|
|
unsigned i;
|
|
|
|
if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
|
|
return;
|
|
|
|
for (i = 0; i < data->num_leds; i++) {
|
|
struct ar8327_led *aled;
|
|
|
|
aled = data->leds[i];
|
|
|
|
if (aled->enable_hw_mode)
|
|
aled->pattern = AR8327_LED_PATTERN_RULE;
|
|
else
|
|
aled->pattern = AR8327_LED_PATTERN_OFF;
|
|
|
|
ar8327_set_led_pattern(priv, aled->led_num, aled->pattern);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ar8327_leds_cleanup(struct ar8xxx_priv *priv)
|
|
{
|
|
struct ar8327_data *data = priv->chip_data;
|
|
unsigned i;
|
|
|
|
if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
|
|
return;
|
|
|
|
for (i = 0; i < data->num_leds; i++) {
|
|
struct ar8327_led *aled;
|
|
|
|
aled = data->leds[i];
|
|
ar8327_led_destroy(aled);
|
|
}
|
|
|
|
kfree(data->leds);
|
|
}
|
|
|
|
static int
|
|
ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
|
|
struct ar8327_platform_data *pdata)
|
|
{
|
|
struct ar8327_led_cfg *led_cfg;
|
|
struct ar8327_data *data = priv->chip_data;
|
|
u32 pos, new_pos;
|
|
u32 t;
|
|
|
|
if (!pdata)
|
|
return -EINVAL;
|
|
|
|
priv->get_port_link = pdata->get_port_link;
|
|
|
|
data->port0_status = ar8327_get_port_init_status(&pdata->port0_cfg);
|
|
data->port6_status = ar8327_get_port_init_status(&pdata->port6_cfg);
|
|
|
|
t = ar8327_get_pad_cfg(pdata->pad0_cfg);
|
|
if (chip_is_ar8337(priv) && !pdata->pad0_cfg->mac06_exchange_dis)
|
|
t |= AR8337_PAD_MAC06_EXCHANGE_EN;
|
|
ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t);
|
|
|
|
t = ar8327_get_pad_cfg(pdata->pad5_cfg);
|
|
ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t);
|
|
t = ar8327_get_pad_cfg(pdata->pad6_cfg);
|
|
ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t);
|
|
|
|
pos = ar8xxx_read(priv, AR8327_REG_POWER_ON_STRIP);
|
|
new_pos = pos;
|
|
|
|
led_cfg = pdata->led_cfg;
|
|
if (led_cfg) {
|
|
if (led_cfg->open_drain)
|
|
new_pos |= AR8327_POWER_ON_STRIP_LED_OPEN_EN;
|
|
else
|
|
new_pos &= ~AR8327_POWER_ON_STRIP_LED_OPEN_EN;
|
|
|
|
ar8xxx_write(priv, AR8327_REG_LED_CTRL0, led_cfg->led_ctrl0);
|
|
ar8xxx_write(priv, AR8327_REG_LED_CTRL1, led_cfg->led_ctrl1);
|
|
ar8xxx_write(priv, AR8327_REG_LED_CTRL2, led_cfg->led_ctrl2);
|
|
ar8xxx_write(priv, AR8327_REG_LED_CTRL3, led_cfg->led_ctrl3);
|
|
|
|
if (new_pos != pos)
|
|
new_pos |= AR8327_POWER_ON_STRIP_POWER_ON_SEL;
|
|
}
|
|
|
|
if (pdata->sgmii_cfg) {
|
|
t = pdata->sgmii_cfg->sgmii_ctrl;
|
|
if (priv->chip_rev == 1)
|
|
t |= AR8327_SGMII_CTRL_EN_PLL |
|
|
AR8327_SGMII_CTRL_EN_RX |
|
|
AR8327_SGMII_CTRL_EN_TX;
|
|
else
|
|
t &= ~(AR8327_SGMII_CTRL_EN_PLL |
|
|
AR8327_SGMII_CTRL_EN_RX |
|
|
AR8327_SGMII_CTRL_EN_TX);
|
|
|
|
ar8xxx_write(priv, AR8327_REG_SGMII_CTRL, t);
|
|
|
|
if (pdata->sgmii_cfg->serdes_aen)
|
|
new_pos &= ~AR8327_POWER_ON_STRIP_SERDES_AEN;
|
|
else
|
|
new_pos |= AR8327_POWER_ON_STRIP_SERDES_AEN;
|
|
}
|
|
|
|
ar8xxx_write(priv, AR8327_REG_POWER_ON_STRIP, new_pos);
|
|
|
|
if (pdata->leds && pdata->num_leds) {
|
|
int i;
|
|
|
|
data->leds = kzalloc(pdata->num_leds * sizeof(void *),
|
|
GFP_KERNEL);
|
|
if (!data->leds)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < pdata->num_leds; i++)
|
|
ar8327_led_create(priv, &pdata->leds[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int
|
|
ar8327_hw_config_of(struct ar8xxx_priv *priv, struct device_node *np)
|
|
{
|
|
struct ar8327_data *data = priv->chip_data;
|
|
const __be32 *paddr;
|
|
int len;
|
|
int i;
|
|
|
|
paddr = of_get_property(np, "qca,ar8327-initvals", &len);
|
|
if (!paddr || len < (2 * sizeof(*paddr)))
|
|
return -EINVAL;
|
|
|
|
len /= sizeof(*paddr);
|
|
|
|
for (i = 0; i < len - 1; i += 2) {
|
|
u32 reg;
|
|
u32 val;
|
|
|
|
reg = be32_to_cpup(paddr + i);
|
|
val = be32_to_cpup(paddr + i + 1);
|
|
|
|
switch (reg) {
|
|
case AR8327_REG_PORT_STATUS(0):
|
|
data->port0_status = val;
|
|
break;
|
|
case AR8327_REG_PORT_STATUS(6):
|
|
data->port6_status = val;
|
|
break;
|
|
default:
|
|
ar8xxx_write(priv, reg, val);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int
|
|
ar8327_hw_config_of(struct ar8xxx_priv *priv, struct device_node *np)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
ar8327_hw_init(struct ar8xxx_priv *priv)
|
|
{
|
|
int ret;
|
|
|
|
priv->chip_data = kzalloc(sizeof(struct ar8327_data), GFP_KERNEL);
|
|
if (!priv->chip_data)
|
|
return -ENOMEM;
|
|
|
|
if (priv->phy->dev.of_node)
|
|
ret = ar8327_hw_config_of(priv, priv->phy->dev.of_node);
|
|
else
|
|
ret = ar8327_hw_config_pdata(priv,
|
|
priv->phy->dev.platform_data);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
ar8327_leds_init(priv);
|
|
|
|
ar8xxx_phy_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ar8327_cleanup(struct ar8xxx_priv *priv)
|
|
{
|
|
ar8327_leds_cleanup(priv);
|
|
}
|
|
|
|
static void
|
|
ar8327_init_globals(struct ar8xxx_priv *priv)
|
|
{
|
|
struct ar8327_data *data = priv->chip_data;
|
|
u32 t;
|
|
int i;
|
|
|
|
/* enable CPU port and disable mirror port */
|
|
t = AR8327_FWD_CTRL0_CPU_PORT_EN |
|
|
AR8327_FWD_CTRL0_MIRROR_PORT;
|
|
ar8xxx_write(priv, AR8327_REG_FWD_CTRL0, t);
|
|
|
|
/* forward multicast and broadcast frames to CPU */
|
|
t = (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_UC_FLOOD_S) |
|
|
(AR8327_PORTS_ALL << AR8327_FWD_CTRL1_MC_FLOOD_S) |
|
|
(AR8327_PORTS_ALL << AR8327_FWD_CTRL1_BC_FLOOD_S);
|
|
ar8xxx_write(priv, AR8327_REG_FWD_CTRL1, t);
|
|
|
|
/* enable jumbo frames */
|
|
ar8xxx_rmw(priv, AR8327_REG_MAX_FRAME_SIZE,
|
|
AR8327_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);
|
|
|
|
/* Enable MIB counters */
|
|
ar8xxx_reg_set(priv, AR8327_REG_MODULE_EN,
|
|
AR8327_MODULE_EN_MIB);
|
|
|
|
/* Disable EEE on all phy's due to stability issues */
|
|
for (i = 0; i < AR8XXX_NUM_PHYS; i++)
|
|
data->eee[i] = false;
|
|
}
|
|
|
|
static void
|
|
ar8327_init_port(struct ar8xxx_priv *priv, int port)
|
|
{
|
|
struct ar8327_data *data = priv->chip_data;
|
|
u32 t;
|
|
|
|
if (port == AR8216_PORT_CPU)
|
|
t = data->port0_status;
|
|
else if (port == 6)
|
|
t = data->port6_status;
|
|
else
|
|
t = AR8216_PORT_STATUS_LINK_AUTO;
|
|
|
|
ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
|
|
ar8xxx_write(priv, AR8327_REG_PORT_HEADER(port), 0);
|
|
|
|
t = 1 << AR8327_PORT_VLAN0_DEF_SVID_S;
|
|
t |= 1 << AR8327_PORT_VLAN0_DEF_CVID_S;
|
|
ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
|
|
|
|
t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
|
|
ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);
|
|
|
|
t = AR8327_PORT_LOOKUP_LEARN;
|
|
t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
|
|
ar8xxx_write(priv, AR8327_REG_PORT_LOOKUP(port), t);
|
|
}
|
|
|
|
static u32
|
|
ar8327_read_port_status(struct ar8xxx_priv *priv, int port)
|
|
{
|
|
u32 t;
|
|
|
|
t = ar8xxx_read(priv, AR8327_REG_PORT_STATUS(port));
|
|
/* map the flow control autoneg result bits to the flow control bits
|
|
* used in forced mode to allow ar8216_read_port_link detect
|
|
* flow control properly if autoneg is used
|
|
*/
|
|
if (t & AR8216_PORT_STATUS_LINK_UP &&
|
|
t & AR8216_PORT_STATUS_LINK_AUTO) {
|
|
t &= ~(AR8216_PORT_STATUS_TXFLOW | AR8216_PORT_STATUS_RXFLOW);
|
|
if (t & AR8327_PORT_STATUS_TXFLOW_AUTO)
|
|
t |= AR8216_PORT_STATUS_TXFLOW;
|
|
if (t & AR8327_PORT_STATUS_RXFLOW_AUTO)
|
|
t |= AR8216_PORT_STATUS_RXFLOW;
|
|
}
|
|
|
|
return t;
|
|
}
|
|
|
|
static u32
|
|
ar8327_read_port_eee_status(struct ar8xxx_priv *priv, int port)
|
|
{
|
|
int phy;
|
|
u16 t;
|
|
|
|
if (port >= priv->dev.ports)
|
|
return 0;
|
|
|
|
if (port == 0 || port == 6)
|
|
return 0;
|
|
|
|
phy = port - 1;
|
|
|
|
/* EEE Ability Auto-negotiation Result */
|
|
t = ar8xxx_phy_mmd_read(priv, phy, 0x7, 0x8000);
|
|
|
|
return mmd_eee_adv_to_ethtool_adv_t(t);
|
|
}
|
|
|
|
static int
|
|
ar8327_atu_flush(struct ar8xxx_priv *priv)
|
|
{
|
|
int ret;
|
|
|
|
ret = ar8216_wait_bit(priv, AR8327_REG_ATU_FUNC,
|
|
AR8327_ATU_FUNC_BUSY, 0);
|
|
if (!ret)
|
|
ar8xxx_write(priv, AR8327_REG_ATU_FUNC,
|
|
AR8327_ATU_FUNC_OP_FLUSH |
|
|
AR8327_ATU_FUNC_BUSY);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
ar8327_atu_flush_port(struct ar8xxx_priv *priv, int port)
|
|
{
|
|
u32 t;
|
|
int ret;
|
|
|
|
ret = ar8216_wait_bit(priv, AR8327_REG_ATU_FUNC,
|
|
AR8327_ATU_FUNC_BUSY, 0);
|
|
if (!ret) {
|
|
t = (port << AR8327_ATU_PORT_NUM_S);
|
|
t |= AR8327_ATU_FUNC_OP_FLUSH_PORT;
|
|
t |= AR8327_ATU_FUNC_BUSY;
|
|
ar8xxx_write(priv, AR8327_REG_ATU_FUNC, t);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
ar8327_get_port_igmp(struct ar8xxx_priv *priv, int port)
|
|
{
|
|
u32 fwd_ctrl, frame_ack;
|
|
|
|
fwd_ctrl = (BIT(port) << AR8327_FWD_CTRL1_IGMP_S);
|
|
frame_ack = ((AR8327_FRAME_ACK_CTRL_IGMP_MLD |
|
|
AR8327_FRAME_ACK_CTRL_IGMP_JOIN |
|
|
AR8327_FRAME_ACK_CTRL_IGMP_LEAVE) <<
|
|
AR8327_FRAME_ACK_CTRL_S(port));
|
|
|
|
return (ar8xxx_read(priv, AR8327_REG_FWD_CTRL1) &
|
|
fwd_ctrl) == fwd_ctrl &&
|
|
(ar8xxx_read(priv, AR8327_REG_FRAME_ACK_CTRL(port)) &
|
|
frame_ack) == frame_ack;
|
|
}
|
|
|
|
static void
|
|
ar8327_set_port_igmp(struct ar8xxx_priv *priv, int port, int enable)
|
|
{
|
|
int reg_frame_ack = AR8327_REG_FRAME_ACK_CTRL(port);
|
|
u32 val_frame_ack = (AR8327_FRAME_ACK_CTRL_IGMP_MLD |
|
|
AR8327_FRAME_ACK_CTRL_IGMP_JOIN |
|
|
AR8327_FRAME_ACK_CTRL_IGMP_LEAVE) <<
|
|
AR8327_FRAME_ACK_CTRL_S(port);
|
|
|
|
if (enable) {
|
|
ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL1,
|
|
BIT(port) << AR8327_FWD_CTRL1_MC_FLOOD_S,
|
|
BIT(port) << AR8327_FWD_CTRL1_IGMP_S);
|
|
ar8xxx_reg_set(priv, reg_frame_ack, val_frame_ack);
|
|
} else {
|
|
ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL1,
|
|
BIT(port) << AR8327_FWD_CTRL1_IGMP_S,
|
|
BIT(port) << AR8327_FWD_CTRL1_MC_FLOOD_S);
|
|
ar8xxx_reg_clear(priv, reg_frame_ack, val_frame_ack);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ar8327_vtu_op(struct ar8xxx_priv *priv, u32 op, u32 val)
|
|
{
|
|
if (ar8216_wait_bit(priv, AR8327_REG_VTU_FUNC1,
|
|
AR8327_VTU_FUNC1_BUSY, 0))
|
|
return;
|
|
|
|
if ((op & AR8327_VTU_FUNC1_OP) == AR8327_VTU_FUNC1_OP_LOAD)
|
|
ar8xxx_write(priv, AR8327_REG_VTU_FUNC0, val);
|
|
|
|
op |= AR8327_VTU_FUNC1_BUSY;
|
|
ar8xxx_write(priv, AR8327_REG_VTU_FUNC1, op);
|
|
}
|
|
|
|
static void
|
|
ar8327_vtu_flush(struct ar8xxx_priv *priv)
|
|
{
|
|
ar8327_vtu_op(priv, AR8327_VTU_FUNC1_OP_FLUSH, 0);
|
|
}
|
|
|
|
static void
|
|
ar8327_vtu_load_vlan(struct ar8xxx_priv *priv, u32 vid, u32 port_mask)
|
|
{
|
|
u32 op;
|
|
u32 val;
|
|
int i;
|
|
|
|
op = AR8327_VTU_FUNC1_OP_LOAD | (vid << AR8327_VTU_FUNC1_VID_S);
|
|
val = AR8327_VTU_FUNC0_VALID | AR8327_VTU_FUNC0_IVL;
|
|
for (i = 0; i < AR8327_NUM_PORTS; i++) {
|
|
u32 mode;
|
|
|
|
if ((port_mask & BIT(i)) == 0)
|
|
mode = AR8327_VTU_FUNC0_EG_MODE_NOT;
|
|
else if (priv->vlan == 0)
|
|
mode = AR8327_VTU_FUNC0_EG_MODE_KEEP;
|
|
else if ((priv->vlan_tagged & BIT(i)) || (priv->vlan_id[priv->pvid[i]] != vid))
|
|
mode = AR8327_VTU_FUNC0_EG_MODE_TAG;
|
|
else
|
|
mode = AR8327_VTU_FUNC0_EG_MODE_UNTAG;
|
|
|
|
val |= mode << AR8327_VTU_FUNC0_EG_MODE_S(i);
|
|
}
|
|
ar8327_vtu_op(priv, op, val);
|
|
}
|
|
|
|
static void
|
|
ar8327_setup_port(struct ar8xxx_priv *priv, int port, u32 members)
|
|
{
|
|
u32 t;
|
|
u32 egress, ingress;
|
|
u32 pvid = priv->vlan_id[priv->pvid[port]];
|
|
|
|
if (priv->vlan) {
|
|
egress = AR8327_PORT_VLAN1_OUT_MODE_UNMOD;
|
|
ingress = AR8216_IN_SECURE;
|
|
} else {
|
|
egress = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH;
|
|
ingress = AR8216_IN_PORT_ONLY;
|
|
}
|
|
|
|
t = pvid << AR8327_PORT_VLAN0_DEF_SVID_S;
|
|
t |= pvid << AR8327_PORT_VLAN0_DEF_CVID_S;
|
|
ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
|
|
|
|
t = AR8327_PORT_VLAN1_PORT_VLAN_PROP;
|
|
t |= egress << AR8327_PORT_VLAN1_OUT_MODE_S;
|
|
ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);
|
|
|
|
t = members;
|
|
t |= AR8327_PORT_LOOKUP_LEARN;
|
|
t |= ingress << AR8327_PORT_LOOKUP_IN_MODE_S;
|
|
t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
|
|
ar8xxx_write(priv, AR8327_REG_PORT_LOOKUP(port), t);
|
|
}
|
|
|
|
static int
|
|
ar8327_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
|
|
{
|
|
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
|
u8 ports = priv->vlan_table[val->port_vlan];
|
|
int i;
|
|
|
|
val->len = 0;
|
|
for (i = 0; i < dev->ports; i++) {
|
|
struct switch_port *p;
|
|
|
|
if (!(ports & (1 << i)))
|
|
continue;
|
|
|
|
p = &val->value.ports[val->len++];
|
|
p->id = i;
|
|
if ((priv->vlan_tagged & (1 << i)) || (priv->pvid[i] != val->port_vlan))
|
|
p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
|
|
else
|
|
p->flags = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ar8327_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
|
|
{
|
|
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
|
u8 *vt = &priv->vlan_table[val->port_vlan];
|
|
int i;
|
|
|
|
*vt = 0;
|
|
for (i = 0; i < val->len; i++) {
|
|
struct switch_port *p = &val->value.ports[i];
|
|
|
|
if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) {
|
|
if (val->port_vlan == priv->pvid[p->id]) {
|
|
priv->vlan_tagged |= (1 << p->id);
|
|
}
|
|
} else {
|
|
priv->vlan_tagged &= ~(1 << p->id);
|
|
priv->pvid[p->id] = val->port_vlan;
|
|
}
|
|
|
|
*vt |= 1 << p->id;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ar8327_set_mirror_regs(struct ar8xxx_priv *priv)
|
|
{
|
|
int port;
|
|
|
|
/* reset all mirror registers */
|
|
ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL0,
|
|
AR8327_FWD_CTRL0_MIRROR_PORT,
|
|
(0xF << AR8327_FWD_CTRL0_MIRROR_PORT_S));
|
|
for (port = 0; port < AR8327_NUM_PORTS; port++) {
|
|
ar8xxx_reg_clear(priv, AR8327_REG_PORT_LOOKUP(port),
|
|
AR8327_PORT_LOOKUP_ING_MIRROR_EN);
|
|
|
|
ar8xxx_reg_clear(priv, AR8327_REG_PORT_HOL_CTRL1(port),
|
|
AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN);
|
|
}
|
|
|
|
/* now enable mirroring if necessary */
|
|
if (priv->source_port >= AR8327_NUM_PORTS ||
|
|
priv->monitor_port >= AR8327_NUM_PORTS ||
|
|
priv->source_port == priv->monitor_port) {
|
|
return;
|
|
}
|
|
|
|
ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL0,
|
|
AR8327_FWD_CTRL0_MIRROR_PORT,
|
|
(priv->monitor_port << AR8327_FWD_CTRL0_MIRROR_PORT_S));
|
|
|
|
if (priv->mirror_rx)
|
|
ar8xxx_reg_set(priv, AR8327_REG_PORT_LOOKUP(priv->source_port),
|
|
AR8327_PORT_LOOKUP_ING_MIRROR_EN);
|
|
|
|
if (priv->mirror_tx)
|
|
ar8xxx_reg_set(priv, AR8327_REG_PORT_HOL_CTRL1(priv->source_port),
|
|
AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN);
|
|
}
|
|
|
|
static int
|
|
ar8327_sw_set_eee(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
|
struct ar8327_data *data = priv->chip_data;
|
|
int port = val->port_vlan;
|
|
int phy;
|
|
|
|
if (port >= dev->ports)
|
|
return -EINVAL;
|
|
if (port == 0 || port == 6)
|
|
return -EOPNOTSUPP;
|
|
|
|
phy = port - 1;
|
|
|
|
data->eee[phy] = !!(val->value.i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ar8327_sw_get_eee(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
|
const struct ar8327_data *data = priv->chip_data;
|
|
int port = val->port_vlan;
|
|
int phy;
|
|
|
|
if (port >= dev->ports)
|
|
return -EINVAL;
|
|
if (port == 0 || port == 6)
|
|
return -EOPNOTSUPP;
|
|
|
|
phy = port - 1;
|
|
|
|
val->value.i = data->eee[phy];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ar8327_wait_atu_ready(struct ar8xxx_priv *priv, u16 r2, u16 r1)
|
|
{
|
|
int timeout = 20;
|
|
|
|
while (ar8xxx_mii_read32(priv, r2, r1) & AR8327_ATU_FUNC_BUSY && --timeout)
|
|
udelay(10);
|
|
|
|
if (!timeout)
|
|
pr_err("ar8327: timeout waiting for atu to become ready\n");
|
|
}
|
|
|
|
static void ar8327_get_arl_entry(struct ar8xxx_priv *priv,
|
|
struct arl_entry *a, u32 *status, enum arl_op op)
|
|
{
|
|
struct mii_bus *bus = priv->mii_bus;
|
|
u16 r2, page;
|
|
u16 r1_data0, r1_data1, r1_data2, r1_func;
|
|
u32 t, val0, val1, val2;
|
|
int i;
|
|
|
|
split_addr(AR8327_REG_ATU_DATA0, &r1_data0, &r2, &page);
|
|
r2 |= 0x10;
|
|
|
|
r1_data1 = (AR8327_REG_ATU_DATA1 >> 1) & 0x1e;
|
|
r1_data2 = (AR8327_REG_ATU_DATA2 >> 1) & 0x1e;
|
|
r1_func = (AR8327_REG_ATU_FUNC >> 1) & 0x1e;
|
|
|
|
switch (op) {
|
|
case AR8XXX_ARL_INITIALIZE:
|
|
/* all ATU registers are on the same page
|
|
* therefore set page only once
|
|
*/
|
|
bus->write(bus, 0x18, 0, page);
|
|
wait_for_page_switch();
|
|
|
|
ar8327_wait_atu_ready(priv, r2, r1_func);
|
|
|
|
ar8xxx_mii_write32(priv, r2, r1_data0, 0);
|
|
ar8xxx_mii_write32(priv, r2, r1_data1, 0);
|
|
ar8xxx_mii_write32(priv, r2, r1_data2, 0);
|
|
break;
|
|
case AR8XXX_ARL_GET_NEXT:
|
|
ar8xxx_mii_write32(priv, r2, r1_func,
|
|
AR8327_ATU_FUNC_OP_GET_NEXT |
|
|
AR8327_ATU_FUNC_BUSY);
|
|
ar8327_wait_atu_ready(priv, r2, r1_func);
|
|
|
|
val0 = ar8xxx_mii_read32(priv, r2, r1_data0);
|
|
val1 = ar8xxx_mii_read32(priv, r2, r1_data1);
|
|
val2 = ar8xxx_mii_read32(priv, r2, r1_data2);
|
|
|
|
*status = val2 & AR8327_ATU_STATUS;
|
|
if (!*status)
|
|
break;
|
|
|
|
i = 0;
|
|
t = AR8327_ATU_PORT0;
|
|
while (!(val1 & t) && ++i < AR8327_NUM_PORTS)
|
|
t <<= 1;
|
|
|
|
a->port = i;
|
|
a->mac[0] = (val0 & AR8327_ATU_ADDR0) >> AR8327_ATU_ADDR0_S;
|
|
a->mac[1] = (val0 & AR8327_ATU_ADDR1) >> AR8327_ATU_ADDR1_S;
|
|
a->mac[2] = (val0 & AR8327_ATU_ADDR2) >> AR8327_ATU_ADDR2_S;
|
|
a->mac[3] = (val0 & AR8327_ATU_ADDR3) >> AR8327_ATU_ADDR3_S;
|
|
a->mac[4] = (val1 & AR8327_ATU_ADDR4) >> AR8327_ATU_ADDR4_S;
|
|
a->mac[5] = (val1 & AR8327_ATU_ADDR5) >> AR8327_ATU_ADDR5_S;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
ar8327_sw_hw_apply(struct switch_dev *dev)
|
|
{
|
|
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
|
const struct ar8327_data *data = priv->chip_data;
|
|
int ret, i;
|
|
|
|
ret = ar8xxx_sw_hw_apply(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i=0; i < AR8XXX_NUM_PHYS; i++) {
|
|
if (data->eee[i])
|
|
ar8xxx_reg_clear(priv, AR8327_REG_EEE_CTRL,
|
|
AR8327_EEE_CTRL_DISABLE_PHY(i));
|
|
else
|
|
ar8xxx_reg_set(priv, AR8327_REG_EEE_CTRL,
|
|
AR8327_EEE_CTRL_DISABLE_PHY(i));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ar8327_sw_get_port_igmp_snooping(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
|
int port = val->port_vlan;
|
|
|
|
if (port >= dev->ports)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
val->value.i = ar8327_get_port_igmp(priv, port);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ar8327_sw_set_port_igmp_snooping(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
|
int port = val->port_vlan;
|
|
|
|
if (port >= dev->ports)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
ar8327_set_port_igmp(priv, port, val->value.i);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ar8327_sw_get_igmp_snooping(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
int port;
|
|
|
|
for (port = 0; port < dev->ports; port++) {
|
|
val->port_vlan = port;
|
|
if (ar8327_sw_get_port_igmp_snooping(dev, attr, val) ||
|
|
!val->value.i)
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ar8327_sw_set_igmp_snooping(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
int port;
|
|
|
|
for (port = 0; port < dev->ports; port++) {
|
|
val->port_vlan = port;
|
|
if (ar8327_sw_set_port_igmp_snooping(dev, attr, val))
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ar8327_sw_get_igmp_v3(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
|
u32 val_reg;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
val_reg = ar8xxx_read(priv, AR8327_REG_FRAME_ACK_CTRL1);
|
|
val->value.i = ((val_reg & AR8327_FRAME_ACK_CTRL_IGMP_V3_EN) != 0);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ar8327_sw_set_igmp_v3(struct switch_dev *dev,
|
|
const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
if (val->value.i)
|
|
ar8xxx_reg_set(priv, AR8327_REG_FRAME_ACK_CTRL1,
|
|
AR8327_FRAME_ACK_CTRL_IGMP_V3_EN);
|
|
else
|
|
ar8xxx_reg_clear(priv, AR8327_REG_FRAME_ACK_CTRL1,
|
|
AR8327_FRAME_ACK_CTRL_IGMP_V3_EN);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct switch_attr ar8327_sw_attr_globals[] = {
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "enable_vlan",
|
|
.description = "Enable VLAN mode",
|
|
.set = ar8xxx_sw_set_vlan,
|
|
.get = ar8xxx_sw_get_vlan,
|
|
.max = 1
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_NOVAL,
|
|
.name = "reset_mibs",
|
|
.description = "Reset all MIB counters",
|
|
.set = ar8xxx_sw_set_reset_mibs,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "enable_mirror_rx",
|
|
.description = "Enable mirroring of RX packets",
|
|
.set = ar8xxx_sw_set_mirror_rx_enable,
|
|
.get = ar8xxx_sw_get_mirror_rx_enable,
|
|
.max = 1
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "enable_mirror_tx",
|
|
.description = "Enable mirroring of TX packets",
|
|
.set = ar8xxx_sw_set_mirror_tx_enable,
|
|
.get = ar8xxx_sw_get_mirror_tx_enable,
|
|
.max = 1
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "mirror_monitor_port",
|
|
.description = "Mirror monitor port",
|
|
.set = ar8xxx_sw_set_mirror_monitor_port,
|
|
.get = ar8xxx_sw_get_mirror_monitor_port,
|
|
.max = AR8327_NUM_PORTS - 1
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "mirror_source_port",
|
|
.description = "Mirror source port",
|
|
.set = ar8xxx_sw_set_mirror_source_port,
|
|
.get = ar8xxx_sw_get_mirror_source_port,
|
|
.max = AR8327_NUM_PORTS - 1
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "arl_age_time",
|
|
.description = "ARL age time (secs)",
|
|
.set = ar8xxx_sw_set_arl_age_time,
|
|
.get = ar8xxx_sw_get_arl_age_time,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_STRING,
|
|
.name = "arl_table",
|
|
.description = "Get ARL table",
|
|
.set = NULL,
|
|
.get = ar8xxx_sw_get_arl_table,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_NOVAL,
|
|
.name = "flush_arl_table",
|
|
.description = "Flush ARL table",
|
|
.set = ar8xxx_sw_set_flush_arl_table,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "igmp_snooping",
|
|
.description = "Enable IGMP Snooping",
|
|
.set = ar8327_sw_set_igmp_snooping,
|
|
.get = ar8327_sw_get_igmp_snooping,
|
|
.max = 1
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "igmp_v3",
|
|
.description = "Enable IGMPv3 support",
|
|
.set = ar8327_sw_set_igmp_v3,
|
|
.get = ar8327_sw_get_igmp_v3,
|
|
.max = 1
|
|
},
|
|
};
|
|
|
|
static const struct switch_attr ar8327_sw_attr_port[] = {
|
|
{
|
|
.type = SWITCH_TYPE_NOVAL,
|
|
.name = "reset_mib",
|
|
.description = "Reset single port MIB counters",
|
|
.set = ar8xxx_sw_set_port_reset_mib,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_STRING,
|
|
.name = "mib",
|
|
.description = "Get port's MIB counters",
|
|
.set = NULL,
|
|
.get = ar8xxx_sw_get_port_mib,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "enable_eee",
|
|
.description = "Enable EEE PHY sleep mode",
|
|
.set = ar8327_sw_set_eee,
|
|
.get = ar8327_sw_get_eee,
|
|
.max = 1,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_NOVAL,
|
|
.name = "flush_arl_table",
|
|
.description = "Flush port's ARL table entries",
|
|
.set = ar8xxx_sw_set_flush_port_arl_table,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "igmp_snooping",
|
|
.description = "Enable port's IGMP Snooping",
|
|
.set = ar8327_sw_set_port_igmp_snooping,
|
|
.get = ar8327_sw_get_port_igmp_snooping,
|
|
.max = 1
|
|
},
|
|
};
|
|
|
|
static const struct switch_dev_ops ar8327_sw_ops = {
|
|
.attr_global = {
|
|
.attr = ar8327_sw_attr_globals,
|
|
.n_attr = ARRAY_SIZE(ar8327_sw_attr_globals),
|
|
},
|
|
.attr_port = {
|
|
.attr = ar8327_sw_attr_port,
|
|
.n_attr = ARRAY_SIZE(ar8327_sw_attr_port),
|
|
},
|
|
.attr_vlan = {
|
|
.attr = ar8xxx_sw_attr_vlan,
|
|
.n_attr = ARRAY_SIZE(ar8xxx_sw_attr_vlan),
|
|
},
|
|
.get_port_pvid = ar8xxx_sw_get_pvid,
|
|
.set_port_pvid = ar8xxx_sw_set_pvid,
|
|
.get_vlan_ports = ar8327_sw_get_ports,
|
|
.set_vlan_ports = ar8327_sw_set_ports,
|
|
.apply_config = ar8327_sw_hw_apply,
|
|
.reset_switch = ar8xxx_sw_reset_switch,
|
|
.get_port_link = ar8xxx_sw_get_port_link,
|
|
};
|
|
|
|
const struct ar8xxx_chip ar8327_chip = {
|
|
.caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
|
|
.config_at_probe = true,
|
|
.mii_lo_first = true,
|
|
|
|
.name = "Atheros AR8327",
|
|
.ports = AR8327_NUM_PORTS,
|
|
.vlans = AR8X16_MAX_VLANS,
|
|
.swops = &ar8327_sw_ops,
|
|
|
|
.reg_port_stats_start = 0x1000,
|
|
.reg_port_stats_length = 0x100,
|
|
.reg_arl_ctrl = AR8327_REG_ARL_CTRL,
|
|
|
|
.hw_init = ar8327_hw_init,
|
|
.cleanup = ar8327_cleanup,
|
|
.init_globals = ar8327_init_globals,
|
|
.init_port = ar8327_init_port,
|
|
.setup_port = ar8327_setup_port,
|
|
.read_port_status = ar8327_read_port_status,
|
|
.read_port_eee_status = ar8327_read_port_eee_status,
|
|
.atu_flush = ar8327_atu_flush,
|
|
.atu_flush_port = ar8327_atu_flush_port,
|
|
.vtu_flush = ar8327_vtu_flush,
|
|
.vtu_load_vlan = ar8327_vtu_load_vlan,
|
|
.phy_fixup = ar8327_phy_fixup,
|
|
.set_mirror_regs = ar8327_set_mirror_regs,
|
|
.get_arl_entry = ar8327_get_arl_entry,
|
|
.sw_hw_apply = ar8327_sw_hw_apply,
|
|
|
|
.num_mibs = ARRAY_SIZE(ar8236_mibs),
|
|
.mib_decs = ar8236_mibs,
|
|
.mib_func = AR8327_REG_MIB_FUNC
|
|
};
|
|
|
|
const struct ar8xxx_chip ar8337_chip = {
|
|
.caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
|
|
.config_at_probe = true,
|
|
.mii_lo_first = true,
|
|
|
|
.name = "Atheros AR8337",
|
|
.ports = AR8327_NUM_PORTS,
|
|
.vlans = AR8X16_MAX_VLANS,
|
|
.swops = &ar8327_sw_ops,
|
|
|
|
.reg_port_stats_start = 0x1000,
|
|
.reg_port_stats_length = 0x100,
|
|
.reg_arl_ctrl = AR8327_REG_ARL_CTRL,
|
|
|
|
.hw_init = ar8327_hw_init,
|
|
.cleanup = ar8327_cleanup,
|
|
.init_globals = ar8327_init_globals,
|
|
.init_port = ar8327_init_port,
|
|
.setup_port = ar8327_setup_port,
|
|
.read_port_status = ar8327_read_port_status,
|
|
.read_port_eee_status = ar8327_read_port_eee_status,
|
|
.atu_flush = ar8327_atu_flush,
|
|
.atu_flush_port = ar8327_atu_flush_port,
|
|
.vtu_flush = ar8327_vtu_flush,
|
|
.vtu_load_vlan = ar8327_vtu_load_vlan,
|
|
.phy_fixup = ar8327_phy_fixup,
|
|
.set_mirror_regs = ar8327_set_mirror_regs,
|
|
.get_arl_entry = ar8327_get_arl_entry,
|
|
.sw_hw_apply = ar8327_sw_hw_apply,
|
|
|
|
.num_mibs = ARRAY_SIZE(ar8236_mibs),
|
|
.mib_decs = ar8236_mibs,
|
|
.mib_func = AR8327_REG_MIB_FUNC
|
|
};
|
|
|