707b6c815b
This patch adds a image with squashfs as the root filesystem. A rootfs_data partition will be generated on the first boot and placed inside the rootfs partition (just after the squashfs image). advantages: - it is possible to migrate from an existing -ext4 installation and back via sysupgrade. - existing partition layout will not be lost. - slightly smaller image size. - support for attendedsysupgrade disadvantages: - needs f2fs + tools as well. This is because fs-tools decides on the blocksize of the sdcard. So either f2fs or ext4 can get choosen as the rootfs_data filesystem (depends on the size of the root partition). - rootfs_data is placed into the rootfs partition. This makes it difficult for tools that expect a /dev/mmc0pX device. It also makes it difficult for data recovery tools since they might not expect to find a embedded partition or will be confused. For people with existing build configurations: make sure to include mkf2fs and f2fsck package into the image... Otherwise the new -squashfs image will boot of a ram-overlay and won't keep the configurations after a reboot. Cc: Álvaro Fernández Rojas <noltari@gmail.com> Cc: Paul Spooren <spooren@informatik.uni-leipzig.de> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Daniel Golle <daniel@makrotopia.org>
84 lines
2.7 KiB
Makefile
84 lines
2.7 KiB
Makefile
#
|
|
# Copyright (C) 2012-2015 OpenWrt.org
|
|
# Copyright (C) 2016-2017 LEDE project
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
FAT32_BLOCK_SIZE=1024
|
|
FAT32_BLOCKS=$(shell echo $$(($(CONFIG_BRCM2708_SD_BOOT_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
|
|
|
|
define Build/Compile
|
|
$(CP) $(LINUX_DIR)/COPYING $(KDIR)/COPYING.linux
|
|
endef
|
|
|
|
### Image scripts ###
|
|
define Build/kernel-img
|
|
perl $(LINUX_DIR)/scripts/mkknlimg $@ $@.tmp
|
|
mv $@.tmp $@
|
|
endef
|
|
|
|
define Build/boot-img
|
|
rm -f $@.boot
|
|
mkfs.fat -C $@.boot $(FAT32_BLOCKS)
|
|
mcopy -i $@.boot $(KDIR)/COPYING.linux ::
|
|
mcopy -i $@.boot $(KDIR)/bootcode.bin ::
|
|
mcopy -i $@.boot $(KDIR)/LICENCE.broadcom ::
|
|
mcopy -i $@.boot $(KDIR)/start.elf ::
|
|
mcopy -i $@.boot $(KDIR)/start_cd.elf ::
|
|
mcopy -i $@.boot $(KDIR)/fixup.dat ::
|
|
mcopy -i $@.boot $(KDIR)/fixup_cd.dat ::
|
|
mcopy -i $@.boot cmdline.txt ::
|
|
mcopy -i $@.boot config.txt ::
|
|
mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_IMG)
|
|
$(foreach dts,$(shell echo $(DEVICE_DTS)),mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb ::;)
|
|
mmd -i $@.boot ::/overlays
|
|
mcopy -i $@.boot $(DTS_DIR)/overlays/*.dtbo ::/overlays/
|
|
mcopy -i $@.boot $(DTS_DIR)/overlays/README ::/overlays/
|
|
endef
|
|
|
|
define Build/sdcard-img
|
|
./gen_rpi_sdcard_img.sh $@ $@.boot $(IMAGE_ROOTFS) \
|
|
$(CONFIG_BRCM2708_SD_BOOT_PARTSIZE) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
|
|
endef
|
|
|
|
### Devices ###
|
|
define Device/Default
|
|
KERNEL := kernel-bin | kernel-img
|
|
KERNEL_IMG := kernel.img
|
|
IMAGES := sdcard.img.gz
|
|
IMAGE/sdcard.img.gz := boot-img | sdcard-img | gzip | append-metadata
|
|
endef
|
|
|
|
define Device/rpi
|
|
DEVICE_TITLE := Raspberry Pi B/B+/CM/Zero/ZeroW
|
|
DEVICE_DTS := bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm bcm2708-rpi-0-w
|
|
SUPPORTED_DEVICES := rpi-b rpi-b-plus rpi-cm rpi-zero rpi-zero-w raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,compute-module-1 raspberrypi,model-b-rev2 raspberrypi,model-zero raspberrypi,model-zero-w
|
|
endef
|
|
ifeq ($(SUBTARGET),bcm2708)
|
|
TARGET_DEVICES += rpi
|
|
endif
|
|
|
|
define Device/rpi-2
|
|
DEVICE_TITLE := Raspberry Pi 2B/3B/3B+/3CM
|
|
DEVICE_DTS := bcm2709-rpi-2-b bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3
|
|
SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-3-b-plus rpi-cm raspberrypi,2-model-b raspberrypi,3-model-b raspberrypi,3-model-b-plus raspberrypi,compute-module-3
|
|
endef
|
|
ifeq ($(SUBTARGET),bcm2709)
|
|
TARGET_DEVICES += rpi-2
|
|
endif
|
|
|
|
define Device/rpi-3
|
|
KERNEL_IMG := kernel8.img
|
|
DEVICE_TITLE := Raspberry Pi 3B/3B+
|
|
DEVICE_DTS := broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus
|
|
SUPPORTED_DEVICES := rpi-3-b rpi-3-b-plus raspberrypi,3-model-b raspberrypi,3-model-b-plus
|
|
endef
|
|
ifeq ($(SUBTARGET),bcm2710)
|
|
TARGET_DEVICES += rpi-3
|
|
endif
|
|
|
|
$(eval $(call BuildImage))
|