b3f95490b9
This adds initial support for kernel 4.14 based on the patches for kernel 4.9. In the configuration I deactivated some of the new possible security features like: CONFIG_REFCOUNT_FULL CONFIG_SLAB_FREELIST_HARDENED CONFIG_SOFTLOCKUP_DETECTOR CONFIG_WARN_ALL_UNSEEDED_RANDOM And these overlay FS options are also deactivated: CONFIG_OVERLAY_FS_INDEX CONFIG_OVERLAY_FS_REDIRECT_DIR I activated this: CONFIG_FORTIFY_SOURCE CONFIG_POSIX_TIMERS CONFIG_SLAB_MERGE_DEFAULT CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED I am not sure if I did the porting correct for the following patches: target/linux/generic/backport-4.14/020-backport_netfilter_rtcache.patch target/linux/generic/hack-4.14/220-gc_sections.patch target/linux/generic/hack-4.14/321-powerpc_crtsavres_prereq.patch target/linux/generic/pending-4.14/305-mips_module_reloc.patch target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
79 lines
2.8 KiB
Diff
79 lines
2.8 KiB
Diff
From: Florian Fainelli <florian@openwrt.org>
|
|
Subject: USB: EHCI: add ignore_oc flag to disable overcurrent checking
|
|
|
|
This patch adds an ignore_oc flag which can be set by EHCI controller
|
|
not supporting or wanting to disable overcurrent checking. The EHCI
|
|
platform data in include/linux/usb/ehci_pdriver.h is also augmented to
|
|
take advantage of this new flag.
|
|
|
|
Signed-off-by: Florian Fainelli <florian@openwrt.org>
|
|
---
|
|
drivers/usb/host/ehci-hcd.c | 2 +-
|
|
drivers/usb/host/ehci-hub.c | 4 ++--
|
|
drivers/usb/host/ehci-platform.c | 1 +
|
|
drivers/usb/host/ehci.h | 1 +
|
|
include/linux/usb/ehci_pdriver.h | 1 +
|
|
5 files changed, 6 insertions(+), 3 deletions(-)
|
|
|
|
--- a/drivers/usb/host/ehci-hcd.c
|
|
+++ b/drivers/usb/host/ehci-hcd.c
|
|
@@ -651,7 +651,7 @@ static int ehci_run (struct usb_hcd *hcd
|
|
"USB %x.%x started, EHCI %x.%02x%s\n",
|
|
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
|
|
temp >> 8, temp & 0xff,
|
|
- ignore_oc ? ", overcurrent ignored" : "");
|
|
+ (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
|
|
|
|
ehci_writel(ehci, INTR_MASK,
|
|
&ehci->regs->intr_enable); /* Turn On Interrupts */
|
|
--- a/drivers/usb/host/ehci-hub.c
|
|
+++ b/drivers/usb/host/ehci-hub.c
|
|
@@ -646,7 +646,7 @@ ehci_hub_status_data (struct usb_hcd *hc
|
|
* always set, seem to clear PORT_OCC and PORT_CSC when writing to
|
|
* PORT_POWER; that's surprising, but maybe within-spec.
|
|
*/
|
|
- if (!ignore_oc)
|
|
+ if (!ignore_oc && !ehci->ignore_oc)
|
|
mask = PORT_CSC | PORT_PEC | PORT_OCC;
|
|
else
|
|
mask = PORT_CSC | PORT_PEC;
|
|
@@ -1016,7 +1016,7 @@ int ehci_hub_control(
|
|
if (temp & PORT_PEC)
|
|
status |= USB_PORT_STAT_C_ENABLE << 16;
|
|
|
|
- if ((temp & PORT_OCC) && !ignore_oc){
|
|
+ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
|
|
status |= USB_PORT_STAT_C_OVERCURRENT << 16;
|
|
|
|
/*
|
|
--- a/drivers/usb/host/ehci-platform.c
|
|
+++ b/drivers/usb/host/ehci-platform.c
|
|
@@ -263,6 +263,8 @@ static int ehci_platform_probe(struct pl
|
|
hcd->has_tt = 1;
|
|
if (pdata->reset_on_resume)
|
|
priv->reset_on_resume = true;
|
|
+ if (pdata->ignore_oc)
|
|
+ ehci->ignore_oc = 1;
|
|
|
|
#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
|
|
if (ehci->big_endian_mmio) {
|
|
--- a/drivers/usb/host/ehci.h
|
|
+++ b/drivers/usb/host/ehci.h
|
|
@@ -231,6 +231,7 @@ struct ehci_hcd { /* one per controlle
|
|
unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
|
|
unsigned need_oc_pp_cycle:1; /* MPC834X port power */
|
|
unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
|
|
+ unsigned ignore_oc:1;
|
|
|
|
/* required for usb32 quirk */
|
|
#define OHCI_CTRL_HCFS (3 << 6)
|
|
--- a/include/linux/usb/ehci_pdriver.h
|
|
+++ b/include/linux/usb/ehci_pdriver.h
|
|
@@ -49,6 +49,7 @@ struct usb_ehci_pdata {
|
|
unsigned no_io_watchdog:1;
|
|
unsigned reset_on_resume:1;
|
|
unsigned dma_mask_64:1;
|
|
+ unsigned ignore_oc:1;
|
|
|
|
/* Turn on all power and clocks */
|
|
int (*power_on)(struct platform_device *pdev);
|