4336efe14b
This replaces the current patches used to make the kernel headers compatible with musl with the version which was accepted upstream. This is included in upstream kernel 4.15. This was compile tested with iproute2 build on all supported kernel versions with musl and one one with glibc. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
552 lines
15 KiB
Diff
552 lines
15 KiB
Diff
--- a/drivers/net/phy/adm6996.c
|
|
+++ b/drivers/net/phy/adm6996.c
|
|
@@ -289,7 +289,7 @@ static u16
|
|
adm6996_read_mii_reg(struct adm6996_priv *priv, enum admreg reg)
|
|
{
|
|
struct phy_device *phydev = priv->priv;
|
|
- struct mii_bus *bus = phydev->mdio.bus;
|
|
+ struct mii_bus *bus = phydev->bus;
|
|
|
|
return bus->read(bus, PHYADDR(reg));
|
|
}
|
|
@@ -298,7 +298,7 @@ static void
|
|
adm6996_write_mii_reg(struct adm6996_priv *priv, enum admreg reg, u16 val)
|
|
{
|
|
struct phy_device *phydev = priv->priv;
|
|
- struct mii_bus *bus = phydev->mdio.bus;
|
|
+ struct mii_bus *bus = phydev->bus;
|
|
|
|
bus->write(bus, PHYADDR(reg), val);
|
|
}
|
|
@@ -1050,13 +1050,13 @@ static int adm6996_config_init(struct ph
|
|
pdev->supported = ADVERTISED_100baseT_Full;
|
|
pdev->advertising = ADVERTISED_100baseT_Full;
|
|
|
|
- if (pdev->mdio.addr != 0) {
|
|
+ if (pdev->addr != 0) {
|
|
pr_info ("%s: PHY overlaps ADM6996, providing fixed PHY 0x%x.\n"
|
|
- , pdev->attached_dev->name, pdev->mdio.addr);
|
|
+ , pdev->attached_dev->name, pdev->addr);
|
|
return 0;
|
|
}
|
|
|
|
- priv = devm_kzalloc(&pdev->mdio.dev, sizeof(struct adm6996_priv), GFP_KERNEL);
|
|
+ priv = devm_kzalloc(&pdev->dev, sizeof(struct adm6996_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
@@ -1076,7 +1076,7 @@ static int adm6996_config_init(struct ph
|
|
}
|
|
|
|
/*
|
|
- * Warning: phydev->priv is NULL if phydev->mdio.addr != 0
|
|
+ * Warning: phydev->priv is NULL if phydev->addr != 0
|
|
*/
|
|
static int adm6996_read_status(struct phy_device *phydev)
|
|
{
|
|
@@ -1092,7 +1092,7 @@ static int adm6996_read_status(struct ph
|
|
}
|
|
|
|
/*
|
|
- * Warning: phydev->priv is NULL if phydev->mdio.addr != 0
|
|
+ * Warning: phydev->priv is NULL if phydev->addr != 0
|
|
*/
|
|
static int adm6996_config_aneg(struct phy_device *phydev)
|
|
{
|
|
@@ -1101,11 +1101,11 @@ static int adm6996_config_aneg(struct ph
|
|
|
|
static int adm6996_fixup(struct phy_device *dev)
|
|
{
|
|
- struct mii_bus *bus = dev->mdio.bus;
|
|
+ struct mii_bus *bus = dev->bus;
|
|
u16 reg;
|
|
|
|
/* Our custom registers are at PHY addresses 0-10. Claim those. */
|
|
- if (dev->mdio.addr > 10)
|
|
+ if (dev->addr > 10)
|
|
return 0;
|
|
|
|
/* look for the switch on the bus */
|
|
@@ -1152,6 +1152,7 @@ static struct phy_driver adm6996_phy_dri
|
|
.config_aneg = &adm6996_config_aneg,
|
|
.read_status = &adm6996_read_status,
|
|
.soft_reset = adm6996_soft_reset,
|
|
+ .driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static int adm6996_gpio_probe(struct platform_device *pdev)
|
|
@@ -1220,7 +1221,7 @@ static int __init adm6996_init(void)
|
|
int err;
|
|
|
|
phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup);
|
|
- err = phy_driver_register(&adm6996_phy_driver, THIS_MODULE);
|
|
+ err = phy_driver_register(&adm6996_phy_driver);
|
|
if (err)
|
|
return err;
|
|
|
|
--- a/drivers/net/phy/ar8216.c
|
|
+++ b/drivers/net/phy/ar8216.c
|
|
@@ -177,7 +177,7 @@ ar8xxx_phy_check_aneg(struct phy_device
|
|
if (ret & BMCR_ANENABLE)
|
|
return 0;
|
|
|
|
- dev_info(&phydev->mdio.dev, "ANEG disabled, re-enabling ...\n");
|
|
+ dev_info(&phydev->dev, "ANEG disabled, re-enabling ...\n");
|
|
ret |= BMCR_ANENABLE | BMCR_ANRESTART;
|
|
return phy_write(phydev, MII_BMCR, ret);
|
|
}
|
|
@@ -2007,7 +2007,7 @@ ar8xxx_phy_config_init(struct phy_device
|
|
|
|
priv->phy = phydev;
|
|
|
|
- if (phydev->mdio.addr != 0) {
|
|
+ if (phydev->addr != 0) {
|
|
if (chip_is_ar8316(priv)) {
|
|
/* switch device has been initialized, reinit */
|
|
priv->dev.ports = (AR8216_NUM_PORTS - 1);
|
|
@@ -2055,7 +2055,7 @@ ar8xxx_check_link_states(struct ar8xxx_p
|
|
/* flush ARL entries for this port if it went down*/
|
|
if (!link_new)
|
|
priv->chip->atu_flush_port(priv, i);
|
|
- dev_info(&priv->phy->mdio.dev, "Port %d is %s\n",
|
|
+ dev_info(&priv->phy->dev, "Port %d is %s\n",
|
|
i, link_new ? "up" : "down");
|
|
}
|
|
|
|
@@ -2074,10 +2074,10 @@ ar8xxx_phy_read_status(struct phy_device
|
|
if (phydev->state == PHY_CHANGELINK)
|
|
ar8xxx_check_link_states(priv);
|
|
|
|
- if (phydev->mdio.addr != 0)
|
|
+ if (phydev->addr != 0)
|
|
return genphy_read_status(phydev);
|
|
|
|
- ar8216_read_port_link(priv, phydev->mdio.addr, &link);
|
|
+ ar8216_read_port_link(priv, phydev->addr, &link);
|
|
phydev->link = !!link.link;
|
|
if (!phydev->link)
|
|
return 0;
|
|
@@ -2107,7 +2107,7 @@ ar8xxx_phy_read_status(struct phy_device
|
|
static int
|
|
ar8xxx_phy_config_aneg(struct phy_device *phydev)
|
|
{
|
|
- if (phydev->mdio.addr == 0)
|
|
+ if (phydev->addr == 0)
|
|
return 0;
|
|
|
|
return genphy_config_aneg(phydev);
|
|
@@ -2162,15 +2162,15 @@ ar8xxx_phy_probe(struct phy_device *phyd
|
|
int ret;
|
|
|
|
/* skip PHYs at unused adresses */
|
|
- if (phydev->mdio.addr != 0 && phydev->mdio.addr != 4)
|
|
+ if (phydev->addr != 0 && phydev->addr != 4)
|
|
return -ENODEV;
|
|
|
|
- if (!ar8xxx_is_possible(phydev->mdio.bus))
|
|
+ if (!ar8xxx_is_possible(phydev->bus))
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&ar8xxx_dev_list_lock);
|
|
list_for_each_entry(priv, &ar8xxx_dev_list, list)
|
|
- if (priv->mii_bus == phydev->mdio.bus)
|
|
+ if (priv->mii_bus == phydev->bus)
|
|
goto found;
|
|
|
|
priv = ar8xxx_create();
|
|
@@ -2179,7 +2179,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
|
|
goto unlock;
|
|
}
|
|
|
|
- priv->mii_bus = phydev->mdio.bus;
|
|
+ priv->mii_bus = phydev->bus;
|
|
|
|
ret = ar8xxx_probe_switch(priv);
|
|
if (ret)
|
|
@@ -2200,7 +2200,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
|
|
found:
|
|
priv->use_count++;
|
|
|
|
- if (phydev->mdio.addr == 0) {
|
|
+ if (phydev->addr == 0) {
|
|
if (ar8xxx_has_gige(priv)) {
|
|
phydev->supported = SUPPORTED_1000baseT_Full;
|
|
phydev->advertising = ADVERTISED_1000baseT_Full;
|
|
@@ -2288,21 +2288,33 @@ ar8xxx_phy_soft_reset(struct phy_device
|
|
return 0;
|
|
}
|
|
|
|
-static struct phy_driver ar8xxx_phy_driver[] = {
|
|
- {
|
|
- .phy_id = 0x004d0000,
|
|
- .name = "Atheros AR8216/AR8236/AR8316",
|
|
- .phy_id_mask = 0xffff0000,
|
|
- .features = PHY_BASIC_FEATURES,
|
|
- .probe = ar8xxx_phy_probe,
|
|
- .remove = ar8xxx_phy_remove,
|
|
- .detach = ar8xxx_phy_detach,
|
|
- .config_init = ar8xxx_phy_config_init,
|
|
- .config_aneg = ar8xxx_phy_config_aneg,
|
|
- .read_status = ar8xxx_phy_read_status,
|
|
- .soft_reset = ar8xxx_phy_soft_reset,
|
|
- }
|
|
+static struct phy_driver ar8xxx_phy_driver = {
|
|
+ .phy_id = 0x004d0000,
|
|
+ .name = "Atheros AR8216/AR8236/AR8316",
|
|
+ .phy_id_mask = 0xffff0000,
|
|
+ .features = PHY_BASIC_FEATURES,
|
|
+ .probe = ar8xxx_phy_probe,
|
|
+ .remove = ar8xxx_phy_remove,
|
|
+ .detach = ar8xxx_phy_detach,
|
|
+ .config_init = ar8xxx_phy_config_init,
|
|
+ .config_aneg = ar8xxx_phy_config_aneg,
|
|
+ .read_status = ar8xxx_phy_read_status,
|
|
+ .soft_reset = ar8xxx_phy_soft_reset,
|
|
+ .driver = { .owner = THIS_MODULE },
|
|
};
|
|
|
|
-module_phy_driver(ar8xxx_phy_driver);
|
|
+int __init
|
|
+ar8xxx_init(void)
|
|
+{
|
|
+ return phy_driver_register(&ar8xxx_phy_driver);
|
|
+}
|
|
+
|
|
+void __exit
|
|
+ar8xxx_exit(void)
|
|
+{
|
|
+ phy_driver_unregister(&ar8xxx_phy_driver);
|
|
+}
|
|
+
|
|
+module_init(ar8xxx_init);
|
|
+module_exit(ar8xxx_exit);
|
|
MODULE_LICENSE("GPL");
|
|
--- a/drivers/net/phy/ar8327.c
|
|
+++ b/drivers/net/phy/ar8327.c
|
|
@@ -627,11 +627,11 @@ ar8327_hw_init(struct ar8xxx_priv *priv)
|
|
if (!priv->chip_data)
|
|
return -ENOMEM;
|
|
|
|
- if (priv->phy->mdio.dev.of_node)
|
|
- ret = ar8327_hw_config_of(priv, priv->phy->mdio.dev.of_node);
|
|
+ if (priv->phy->dev.of_node)
|
|
+ ret = ar8327_hw_config_of(priv, priv->phy->dev.of_node);
|
|
else
|
|
ret = ar8327_hw_config_pdata(priv,
|
|
- priv->phy->mdio.dev.platform_data);
|
|
+ priv->phy->dev.platform_data);
|
|
|
|
if (ret)
|
|
return ret;
|
|
--- a/drivers/net/phy/ip17xx.c
|
|
+++ b/drivers/net/phy/ip17xx.c
|
|
@@ -1273,7 +1273,7 @@ static int ip17xx_probe(struct phy_devic
|
|
int err;
|
|
|
|
/* We only attach to PHY 0, but use all available PHYs */
|
|
- if (pdev->mdio.addr != 0)
|
|
+ if (pdev->addr != 0)
|
|
return -ENODEV;
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
@@ -1283,7 +1283,7 @@ static int ip17xx_probe(struct phy_devic
|
|
dev = &state->dev;
|
|
|
|
pdev->priv = state;
|
|
- state->mii_bus = pdev->mdio.bus;
|
|
+ state->mii_bus = pdev->bus;
|
|
|
|
err = get_model(state);
|
|
if (err < 0)
|
|
@@ -1295,7 +1295,7 @@ static int ip17xx_probe(struct phy_devic
|
|
dev->name = state->regs->NAME;
|
|
dev->ops = &ip17xx_ops;
|
|
|
|
- pr_info("IP17xx: Found %s at %s\n", dev->name, dev_name(&pdev->mdio.dev));
|
|
+ pr_info("IP17xx: Found %s at %s\n", dev->name, dev_name(&pdev->dev));
|
|
return 0;
|
|
|
|
error:
|
|
@@ -1353,25 +1353,58 @@ static int ip17xx_read_status(struct phy
|
|
return 0;
|
|
}
|
|
|
|
-static struct phy_driver ip17xx_driver[] = {
|
|
- {
|
|
- .name = "IC+ IP17xx",
|
|
- .phy_id = 0x02430c00,
|
|
- .phy_id_mask = 0x0ffffc00,
|
|
- .features = PHY_BASIC_FEATURES,
|
|
- .probe = ip17xx_probe,
|
|
- .remove = ip17xx_remove,
|
|
- .config_init = ip17xx_config_init,
|
|
- .config_aneg = ip17xx_config_aneg,
|
|
- .aneg_done = ip17xx_aneg_done,
|
|
- .update_link = ip17xx_update_link,
|
|
- .read_status = ip17xx_read_status,
|
|
- }
|
|
+static struct phy_driver ip17xx_driver = {
|
|
+ .name = "IC+ IP17xx",
|
|
+ .phy_id = 0x02430c00,
|
|
+ .phy_id_mask = 0x0ffffc00,
|
|
+ .features = PHY_BASIC_FEATURES,
|
|
+ .probe = ip17xx_probe,
|
|
+ .remove = ip17xx_remove,
|
|
+ .config_init = ip17xx_config_init,
|
|
+ .config_aneg = ip17xx_config_aneg,
|
|
+ .aneg_done = ip17xx_aneg_done,
|
|
+ .update_link = ip17xx_update_link,
|
|
+ .read_status = ip17xx_read_status,
|
|
+ .driver = { .owner = THIS_MODULE },
|
|
};
|
|
|
|
-module_phy_driver(ip17xx_driver);
|
|
+static struct phy_driver ip175a_driver = {
|
|
+ .name = "IC+ IP175A",
|
|
+ .phy_id = 0x02430c50,
|
|
+ .phy_id_mask = 0x0ffffff0,
|
|
+ .features = PHY_BASIC_FEATURES,
|
|
+ .probe = ip17xx_probe,
|
|
+ .remove = ip17xx_remove,
|
|
+ .config_init = ip17xx_config_init,
|
|
+ .config_aneg = ip17xx_config_aneg,
|
|
+ .aneg_done = ip17xx_aneg_done,
|
|
+ .update_link = ip17xx_update_link,
|
|
+ .read_status = ip17xx_read_status,
|
|
+ .driver = { .owner = THIS_MODULE },
|
|
+};
|
|
+
|
|
+
|
|
+int __init ip17xx_init(void)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ ret = phy_driver_register(&ip175a_driver);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ return phy_driver_register(&ip17xx_driver);
|
|
+}
|
|
+
|
|
+void __exit ip17xx_exit(void)
|
|
+{
|
|
+ phy_driver_unregister(&ip17xx_driver);
|
|
+ phy_driver_unregister(&ip175a_driver);
|
|
+}
|
|
|
|
MODULE_AUTHOR("Patrick Horn <patrick.horn@gmail.com>");
|
|
MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
|
|
MODULE_AUTHOR("Martin Mares <mj@ucw.cz>");
|
|
MODULE_LICENSE("GPL");
|
|
+
|
|
+module_init(ip17xx_init);
|
|
+module_exit(ip17xx_exit);
|
|
--- a/drivers/net/phy/mvswitch.c
|
|
+++ b/drivers/net/phy/mvswitch.c
|
|
@@ -50,17 +50,13 @@ struct mvswitch_priv {
|
|
static inline u16
|
|
r16(struct phy_device *phydev, int addr, int reg)
|
|
{
|
|
- struct mii_bus *bus = phydev->mdio.bus;
|
|
-
|
|
- return bus->read(bus, addr, reg);
|
|
+ return phydev->bus->read(phydev->bus, addr, reg);
|
|
}
|
|
|
|
static inline void
|
|
w16(struct phy_device *phydev, int addr, int reg, u16 val)
|
|
{
|
|
- struct mii_bus *bus = phydev->mdio.bus;
|
|
-
|
|
- bus->write(bus, addr, reg, val);
|
|
+ phydev->bus->write(phydev->bus, addr, reg, val);
|
|
}
|
|
|
|
|
|
@@ -398,13 +394,12 @@ mvswitch_probe(struct phy_device *pdev)
|
|
static int
|
|
mvswitch_fixup(struct phy_device *dev)
|
|
{
|
|
- struct mii_bus *bus = dev->mdio.bus;
|
|
u16 reg;
|
|
|
|
- if (dev->mdio.addr != 0x10)
|
|
+ if (dev->addr != 0x10)
|
|
return 0;
|
|
|
|
- reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
|
|
+ reg = dev->bus->read(dev->bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
|
|
if (reg != MV_IDENT_VALUE)
|
|
return 0;
|
|
|
|
@@ -425,13 +420,14 @@ static struct phy_driver mvswitch_driver
|
|
.config_aneg = &mvswitch_config_aneg,
|
|
.aneg_done = &mvswitch_aneg_done,
|
|
.read_status = &mvswitch_read_status,
|
|
+ .driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static int __init
|
|
mvswitch_init(void)
|
|
{
|
|
phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup);
|
|
- return phy_driver_register(&mvswitch_driver, THIS_MODULE);
|
|
+ return phy_driver_register(&mvswitch_driver);
|
|
}
|
|
|
|
static void __exit
|
|
--- a/drivers/net/phy/psb6970.c
|
|
+++ b/drivers/net/phy/psb6970.c
|
|
@@ -70,16 +70,12 @@ struct psb6970_priv {
|
|
|
|
static u16 psb6970_mii_read(struct phy_device *phydev, int reg)
|
|
{
|
|
- struct mii_bus *bus = phydev->mdio.bus;
|
|
-
|
|
- return bus->read(bus, PHYADDR(reg));
|
|
+ return phydev->bus->read(phydev->bus, PHYADDR(reg));
|
|
}
|
|
|
|
static void psb6970_mii_write(struct phy_device *phydev, int reg, u16 val)
|
|
{
|
|
- struct mii_bus *bus = phydev->mdio.bus;
|
|
-
|
|
- bus->write(bus, PHYADDR(reg), val);
|
|
+ phydev->bus->write(phydev->bus, PHYADDR(reg), val);
|
|
}
|
|
|
|
static int
|
|
@@ -316,11 +312,11 @@ static int psb6970_config_init(struct ph
|
|
|
|
priv->phy = pdev;
|
|
|
|
- if (pdev->mdio.addr == 0)
|
|
+ if (pdev->addr == 0)
|
|
printk(KERN_INFO "%s: psb6970 switch driver attached.\n",
|
|
pdev->attached_dev->name);
|
|
|
|
- if (pdev->mdio.addr != 0) {
|
|
+ if (pdev->addr != 0) {
|
|
kfree(priv);
|
|
return 0;
|
|
}
|
|
@@ -388,14 +384,14 @@ static void psb6970_remove(struct phy_de
|
|
if (!priv)
|
|
return;
|
|
|
|
- if (pdev->mdio.addr == 0)
|
|
+ if (pdev->addr == 0)
|
|
unregister_switch(&priv->dev);
|
|
kfree(priv);
|
|
}
|
|
|
|
static int psb6970_fixup(struct phy_device *dev)
|
|
{
|
|
- struct mii_bus *bus = dev->mdio.bus;
|
|
+ struct mii_bus *bus = dev->bus;
|
|
u16 reg;
|
|
|
|
/* look for the switch on the bus */
|
|
@@ -419,12 +415,13 @@ static struct phy_driver psb6970_driver
|
|
.config_init = &psb6970_config_init,
|
|
.config_aneg = &psb6970_config_aneg,
|
|
.read_status = &psb6970_read_status,
|
|
+ .driver = {.owner = THIS_MODULE},
|
|
};
|
|
|
|
int __init psb6970_init(void)
|
|
{
|
|
phy_register_fixup_for_id(PHY_ANY_ID, psb6970_fixup);
|
|
- return phy_driver_register(&psb6970_driver, THIS_MODULE);
|
|
+ return phy_driver_register(&psb6970_driver);
|
|
}
|
|
|
|
module_init(psb6970_init);
|
|
--- a/drivers/net/phy/rtl8306.c
|
|
+++ b/drivers/net/phy/rtl8306.c
|
|
@@ -877,7 +877,7 @@ rtl8306_config_init(struct phy_device *p
|
|
int err;
|
|
|
|
/* Only init the switch for the primary PHY */
|
|
- if (pdev->mdio.addr != 0)
|
|
+ if (pdev->addr != 0)
|
|
return 0;
|
|
|
|
val.value.i = 1;
|
|
@@ -887,7 +887,7 @@ rtl8306_config_init(struct phy_device *p
|
|
priv->dev.ops = &rtl8306_ops;
|
|
priv->do_cpu = 0;
|
|
priv->page = -1;
|
|
- priv->bus = pdev->mdio.bus;
|
|
+ priv->bus = pdev->bus;
|
|
|
|
chipid = rtl_get(dev, RTL_REG_CHIPID);
|
|
chipver = rtl_get(dev, RTL_REG_CHIPVER);
|
|
@@ -933,13 +933,13 @@ rtl8306_fixup(struct phy_device *pdev)
|
|
u16 chipid;
|
|
|
|
/* Attach to primary LAN port and WAN port */
|
|
- if (pdev->mdio.addr != 0 && pdev->mdio.addr != 4)
|
|
+ if (pdev->addr != 0 && pdev->addr != 4)
|
|
return 0;
|
|
|
|
memset(&priv, 0, sizeof(priv));
|
|
priv.fixup = true;
|
|
priv.page = -1;
|
|
- priv.bus = pdev->mdio.bus;
|
|
+ priv.bus = pdev->bus;
|
|
chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
|
|
if (chipid == 0x5988)
|
|
pdev->phy_id = RTL8306_MAGIC;
|
|
@@ -957,14 +957,14 @@ rtl8306_probe(struct phy_device *pdev)
|
|
* share one rtl_priv instance between virtual phy
|
|
* devices on the same bus
|
|
*/
|
|
- if (priv->bus == pdev->mdio.bus)
|
|
+ if (priv->bus == pdev->bus)
|
|
goto found;
|
|
}
|
|
priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
- priv->bus = pdev->mdio.bus;
|
|
+ priv->bus = pdev->bus;
|
|
|
|
found:
|
|
pdev->priv = priv;
|
|
@@ -985,7 +985,7 @@ rtl8306_config_aneg(struct phy_device *p
|
|
struct rtl_priv *priv = pdev->priv;
|
|
|
|
/* Only for WAN */
|
|
- if (pdev->mdio.addr == 0)
|
|
+ if (pdev->addr == 0)
|
|
return 0;
|
|
|
|
/* Restart autonegotiation */
|
|
@@ -1001,7 +1001,7 @@ rtl8306_read_status(struct phy_device *p
|
|
struct rtl_priv *priv = pdev->priv;
|
|
struct switch_dev *dev = &priv->dev;
|
|
|
|
- if (pdev->mdio.addr == 4) {
|
|
+ if (pdev->addr == 4) {
|
|
/* WAN */
|
|
pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
|
|
pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
@@ -1044,6 +1044,7 @@ static struct phy_driver rtl8306_driver
|
|
.config_init = &rtl8306_config_init,
|
|
.config_aneg = &rtl8306_config_aneg,
|
|
.read_status = &rtl8306_read_status,
|
|
+ .driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
|
|
@@ -1051,7 +1052,7 @@ static int __init
|
|
rtl_init(void)
|
|
{
|
|
phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
|
|
- return phy_driver_register(&rtl8306_driver, THIS_MODULE);
|
|
+ return phy_driver_register(&rtl8306_driver);
|
|
}
|
|
|
|
static void __exit
|