openwrtv4/target/linux/ramips
Jiawei Wang 9c500db896 ramips: fix used MAC addresses for Phicomm K2P
The factory partition of the Phicomm K2P contains two MAC addresses.
The lower MAC address is at offset 0xe006 and the higher one is at
offset 0xe000.

Use the lower MAC address as base mac-address which the switch driver
increments by one for the second (wan) vlan.

The MAC addresses are still inverted in contrast to the stock firmware
where the lower MAC address is used for wan. But at least the use of a
MAC address not intended/reserved for this particular board is fixed.

Signed-off-by: Jiawei Wang <me@jwang.link>
2017-09-15 07:14:29 +02:00
..
base-files ramips: add support for TP-Link Archer C20 v1 2017-09-13 08:07:54 +02:00
dts ramips: fix used MAC addresses for Phicomm K2P 2017-09-15 07:14:29 +02:00
files-4.9/drivers/net/ethernet/mtk ramips: Change ethernet driver to use napi_complete_done. 2017-09-11 17:03:54 +02:00
image ramips: add support for TP-Link Archer C20 v1 2017-09-13 08:07:54 +02:00
mt76x8 ramips: merge mt7628/mt7688 into mt76x8 2017-08-30 17:05:10 +02:00
mt7620 ramips: drop stray kernel 4.4 configs 2017-07-27 09:17:25 +02:00
mt7621 ramips: drop stray kernel 4.4 configs 2017-07-27 09:17:25 +02:00
patches-4.9 kernel: update 4.9 to 4.9.45 2017-08-30 17:05:10 +02:00
rt288x ramips: drop stray kernel 4.4 configs 2017-07-27 09:17:25 +02:00
rt305x ramips: drop stray kernel 4.4 configs 2017-07-27 09:17:25 +02:00
rt3883 ramips: drop stray kernel 4.4 configs 2017-07-27 09:17:25 +02:00
Makefile ramips: merge mt7628/mt7688 into mt76x8 2017-08-30 17:05:10 +02:00
modules.mk ramips: fix mt76x8 dependencies 2017-09-05 08:08:36 +02:00