KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ar71xx/image/generic-ubnt.mk
Arne Zachlod d0988235dd
ar71xx: add support for Ubiquiti Litebeam M5 
Specification:
- SoC: Atheros AR9342
- Flash: 8 MiB
- RAM: 64 MiB
- UART: 1x UART on PCB - 115200 8N1
- Ethernet: 1 x 100 Mbit with passive PoE (24V/0.2A)

Doesn't work:
* Flash via TFTP with Ubiquiti Uboot

Installation via vendor firmware:
- upload factory image via webinterface

Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
2018-03-15 19:11:39 +01:00

280 lines
7.3 KiB
Makefile
Raw Blame History

DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
define Build/mkubntimage
-$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@
endef
# all UBNT XM device expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
-[ -f $@ ] && ( \
dd if=$@ of=$@.old1 bs=1024k count=1; \
dd if=$@ of=$@.old2 bs=1024k skip=1; \
$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-k $@.old1 \
-r $@.old2 \
-o $@; \
rm $@.old1 $@.old2 )
endef
define Build/mkubntimage2
-$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-p jffs2:0x50000:0xf60000:0:0:$@ \
-o $@.new
@mv $@.new $@
endef
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
define Device/ubnt
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
UBNT_BOARD := XM
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
endef
define Device/ubnt-xm
$(Device/ubnt)
DEVICE_PACKAGES += kmod-usb-ohci
UBNT_TYPE := XM
UBNT_CHIP := ar7240
endef
define Device/ubnt-xw
$(Device/ubnt)
UBNT_TYPE := XW
UBNT_CHIP := ar934x
endef
define Device/ubnt-bz
$(Device/ubnt)
UBNT_TYPE := BZ
UBNT_CHIP := ar7240
endef
define Device/rw2458n
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti RW2458N
BOARDNAME := RW2458N
endef
TARGET_DEVICES += rw2458n
define Device/ubnt-airrouter
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti AirRouter
BOARDNAME := UBNT-AR
endef
TARGET_DEVICES += ubnt-airrouter
define Device/ubnt-bullet-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Bullet-M
BOARDNAME := UBNT-BM
endef
TARGET_DEVICES += ubnt-bullet-m
define Device/ubnt-rocket-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Rocket-M
BOARDNAME := UBNT-RM
endef
TARGET_DEVICES += ubnt-rocket-m
define Device/ubnt-nano-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Nano-M
BOARDNAME := UBNT-NM
endef
TARGET_DEVICES += ubnt-nano-m
define Device/ubnt-unifi
$(Device/ubnt-bz)
DEVICE_TITLE := Ubiquiti UniFi
BOARDNAME := UBNT-UF
DEVICE_PROFILE += UBNTUNIFI
endef
TARGET_DEVICES += ubnt-unifi
define Device/ubnt-unifiac
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7744k
MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-unifiac-lite
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Lite
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
DEVICE_PROFILE += UBNTUNIFIACLITE
BOARDNAME := UBNT-UF-AC-LITE
endef
TARGET_DEVICES += ubnt-unifiac-lite
define Device/ubnt-unifiac-mesh
$(Device/ubnt-unifiac-lite)
DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
endef
TARGET_DEVICES += ubnt-unifiac-mesh
define Device/ubnt-unifiac-pro
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Pro
DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x
DEVICE_PROFILE += UBNTUNIFIACPRO
BOARDNAME := UBNT-UF-AC-PRO
endef
TARGET_DEVICES += ubnt-unifiac-pro
define Device/ubnt-unifi-outdoor
$(Device/ubnt-bz)
DEVICE_TITLE := Ubiquiti UniFi Outdoor
BOARDNAME := UBNT-U20
DEVICE_PROFILE += UBNTUNIFIOUTDOOR
endef
TARGET_DEVICES += ubnt-unifi-outdoor
define Device/ubnt-nano-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Nano M XW
BOARDNAME := UBNT-NM-XW
endef
TARGET_DEVICES += ubnt-nano-m-xw
define Device/ubnt-lbe-m5
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Litebeam M5
BOARDNAME := UBNT-LBE-M5
endef
TARGET_DEVICES += ubnt-lbe-m5
define Device/ubnt-loco-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Loco XW
BOARDNAME := UBNT-LOCO-XW
endef
TARGET_DEVICES += ubnt-loco-m-xw
define Device/ubnt-rocket-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Rocket M XW
BOARDNAME := UBNT-RM-XW
endef
TARGET_DEVICES += ubnt-rocket-m-xw
define Device/ubnt-rocket-m-ti
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Rocket M TI
BOARDNAME := UBNT-RM-TI
UBNT_TYPE := TI
endef
TARGET_DEVICES += ubnt-rocket-m-ti
define Device/ubnt-air-gateway
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Air Gateway
BOARDNAME := UBNT-AGW
UBNT_TYPE := AirGW
UBNT_CHIP := ar933x
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += ubnt-air-gateway
define Device/ubnt-air-gateway-pro
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Air Gateway Pro
BOARDNAME := UBNT-AGWP
UBNT_TYPE := AirGWP
UBNT_CHIP := ar934x
endef
TARGET_DEVICES += ubnt-air-gateway-pro
define Device/ubdev01
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti ubDEV01
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
BOARDNAME := UBNT-UF
UBNT_BOARD := UBDEV01
endef
TARGET_DEVICES += ubdev01
define Device/ubnt-routerstation
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 16128k
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
endef
define Device/ubnt-rs
$(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation
BOARDNAME := UBNT-RS
DEVICE_PROFILE += UBNTRS
UBNT_BOARD := RS
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
endef
TARGET_DEVICES += ubnt-rs
define Device/ubnt-rspro
$(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation Pro
BOARDNAME := UBNT-RSPRO
DEVICE_PROFILE += UBNTRSPRO
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
endef
TARGET_DEVICES += ubnt-rspro
define Device/ubnt-ls-sr71
$(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti LS-SR71
BOARDNAME := UBNT-LS-SR71
UBNT_BOARD := LS-SR71
UBNT_TYPE := LS-SR71
UBNT_CHIP := ar7100
endef
TARGET_DEVICES += ubnt-ls-sr71
define Device/ubnt-uap-pro
DEVICE_TITLE := Ubiquiti UAP Pro
KERNEL_SIZE := 1536k
IMAGE_SIZE := 15744k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
UBNT_TYPE := BZ
UBNT_CHIP := ar934x
BOARDNAME := UAP-PRO
DEVICE_PROFILE := UBNT UAPPRO
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
endef
define Device/ubnt-unifi-outdoor-plus
$(Device/ubnt-uap-pro)
DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
UBNT_CHIP := ar7240
BOARDNAME := UBNT-UOP
DEVICE_PROFILE := UBNT
endef
Reference in a new issue View git blame Copy permalink