openwrtv4/target/linux/ar71xx/image/Makefile
Felix Fietkau 7f75961e38 ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)
The international version is completely different from the already
supported Chinese version. The WLAN of the QCA956x SoC used by this router
has been fixed in r46948.

This patch looks like it changes a lot in
700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately,
quilt decided to completely reorganize the Kconfig patch even though only
a single section has been added.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47420
2015-11-08 20:39:18 +00:00

2431 lines
90 KiB
Makefile

#
# Copyright (C) 2008-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
JFFS2_BLOCKSIZE = 64k 128k 256k
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
IMAGE_PROFILE:=$(if $(PROFILE),$(PROFILE),Default)
KERNEL_LOADADDR = 0x80060000
DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD_ID NETGEAR_HW_ID CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS
define Build/netgear-squashfs
rm -rf $@.fs $@.squashfs
mkdir -p $@.fs/image
cp $@ $@.fs/image/uImage
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$@.fs $@.squashfs \
-noappend -root-owned -be -b 65536
dd if=/dev/zero bs=1k count=1 >> $@.squashfs
mkimage \
-A mips -O linux -T filesystem -C none \
-M $(NETGEAR_KERNEL_MAGIC) \
-a 0xbf070000 -e 0xbf070000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $@.squashfs $@
rm -rf $@.squashfs $@.fs
endef
define Build/netgear-uImage
$(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
endef
# combine kernel and rootfs into one image
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
# <type> is "sysupgrade" or "factory"
#
# -a align the rootfs start on an <align> bytes boundary
# -j add jffs2 end-of-filesystem markers
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/mktplinkfw
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $2 \
-m $(TPLINK_HEADER_VERSION) \
-k $(word 1,$^) \
-r $@ \
-o $@.new \
-j -X 0x40000 \
-a $(call rootfs_align,$(FILESYSTEM)) \
$(if $(findstring sysupgrade,$1),-s) && mv $@.new $@ || rm -f $@
endef
# mktplinkfw-initramfs <optional extra arguments to mktplinkfw binary>
#
# -c combined image
define Build/mktplinkfw-initramfs
$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $2 \
-m $(TPLINK_HEADER_VERSION) \
-k $@ \
-o $@.new \
-s -S \
-c
@mv $@.new $@
endef
define Build/loader-common
rm -rf $@.src
$(MAKE) -C lzma-loader \
PKG_BUILD_DIR="$@.src" \
TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
KERNEL_CMDLINE="$(CMDLINE)" BOARD="$(BOARDNAME)" \
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
$(1) compile loader.gz
mv "$@.gz" "$@"
rm -rf $@.src
endef
define Build/loader-okli-compile
$(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0)
endef
define Build/loader-kernel
$(call Build/loader-common,LOADER_DATA="$@")
endef
define Build/loader-okli
dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
cat "$@" >> "$@.new"
mv "$@.new" "$@"
endef
define Build/copy-file
cat "$(1)" > "$@"
endef
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
define Build/mkubntimage
$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
-k $(word 1,$^) \
-r $@ \
-o $@
endef
# all UBNT XM device expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
dd if=$@ of=$@.old1 bs=1024k count=1
dd if=$@ of=$@.old2 bs=1024k skip=1
$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
-k $@.old1 \
-r $@.old2 \
-o $@
rm $@.old1 $@.old2
endef
define Build/mkubntimage2
$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
-p jffs2:0x50000:0xf60000:0:0:$@ \
-o $@.new
@mv $@.new $@
endef
DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
define Device/Default
BOARDNAME :=
DEVICE_PROFILE = $$(BOARDNAME)
PROFILES = Default Minimal $$(DEVICE_PROFILE)
MTDPARTS :=
IMAGES := sysupgrade.bin
BLOCKSIZE := 64k
FILESYSTEMS = $(filter-out jffs2-%,$(TARGET_FILESYSTEMS)) jffs2-$$(BLOCKSIZE)
CONSOLE = ttyS0,115200
CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE))
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
COMPILE :=
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/bsb
BOARDNAME = BSB
IMAGE_SIZE = 16000k
CONSOLE = ttyATH0,115200
MTDPARTS = spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
endef
TARGET_DEVICES += bsb
define Device/carambola2
BOARDNAME = CARAMBOLA2
IMAGE_SIZE = 16000k
CONSOLE = ttyATH0,115200
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += carambola2
define Device/cf-e316n-v2
BOARDNAME = CF-E316N-V2
IMAGE_SIZE = 16192k
CONSOLE = ttyS0,115200
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
endef
TARGET_DEVICES += cf-e316n-v2
define Device/weio
BOARDNAME = WEIO
IMAGE_SIZE = 16000k
CONSOLE = ttyATH0,115200
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += weio
define Device/wndr3700
BOARDNAME = WNDR3700
NETGEAR_KERNEL_MAGIC = 0x33373030
NETGEAR_BOARD_ID = WNDR3700
IMAGE_SIZE = 7680k
MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img factory-NA.img
KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
IMAGE/default = append-kernel $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin = $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img = $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
endef
define Device/wndr3700v2
$(Device/wndr3700)
NETGEAR_BOARD_ID = WNDR3700v2
NETGEAR_KERNEL_MAGIC = 0x33373031
NETGEAR_HW_ID = 29763654+16+64
IMAGE_SIZE = 15872k
MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img
endef
define Device/wndr3800
$(Device/wndr3700v2)
NETGEAR_BOARD_ID = WNDR3800
NETGEAR_HW_ID = 29763654+16+128
endef
define Device/wndr3800ch
$(Device/wndr3800)
NETGEAR_BOARD_ID = WNDR3800CH
endef
define Device/wndrmac
$(Device/wndr3700v2)
NETGEAR_BOARD_ID = WNDRMAC
endef
define Device/wndrmacv2
$(Device/wndr3800)
NETGEAR_BOARD_ID = WNDRMACv2
endef
TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2
define Device/tplink
TPLINK_HWREV := 0x1
TPLINK_HEADER_VERSION := 1
KERNEL := kernel-bin | patch-cmdline | lzma
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-initramfs
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
IMAGE/factory.bin := append-rootfs | mktplinkfw factory
endef
define Device/tplink-nolzma
$(Device/tplink)
LOADER_FLASH_OFFS := 0x22000
COMPILE := loader-$(1).gz
COMPILE/loader-$(1).gz := loader-okli-compile
KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel | mktplinkfw-initramfs
endef
define Device/tplink-4m
$(Device/tplink-nolzma)
TPLINK_FLASHLAYOUT := 4M
IMAGE_SIZE := 3904k
endef
define Device/tplink-8m
$(Device/tplink-nolzma)
TPLINK_FLASHLAYOUT := 8M
IMAGE_SIZE := 7936k
endef
define Device/tplink-4mlzma
$(Device/tplink)
TPLINK_FLASHLAYOUT := 4Mlzma
IMAGE_SIZE := 3904k
endef
define Device/tplink-8mlzma
$(Device/tplink)
TPLINK_FLASHLAYOUT := 8Mlzma
IMAGE_SIZE := 7936k
endef
define Device/tplink-16mlzma
$(Device/tplink)
TPLINK_FLASHLAYOUT := 16Mlzma
IMAGE_SIZE := 15872k
endef
define Device/tl-wdr4300-v1
$(Device/tplink-8mlzma)
BOARDNAME = TL-WDR4300
DEVICE_PROFILE = TLWDR4300
TPLINK_HWID := 0x43000001
endef
define Device/tl-wdr3500-v1
$(Device/tl-wdr4300-v1)
BOARDNAME = TL-WDR3500
TPLINK_HWID := 0x35000001
endef
define Device/tl-wdr3600-v1
$(Device/tl-wdr4300-v1)
TPLINK_HWID := 0x36000001
endef
define Device/tl-wdr4300-v1-il
$(Device/tl-wdr4300-v1)
TPLINK_HWID := 0x43008001
endef
define Device/tl-wdr4310-v1
$(Device/tl-wdr4300-v1)
TPLINK_HWID := 0x43100001
endef
define Device/mw4530r-v1
$(Device/tl-wdr4300-v1)
TPLINK_HWID := 0x45300001
endef
TARGET_DEVICES += tl-wdr3500-v1 tl-wdr3600-v1 tl-wdr4300-v1 tl-wdr4300-v1-il tl-wdr4310-v1 mw4530r-v1
define Device/tl-wdr6500-v2
$(Device/tplink-8mlzma)
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma | mktplinkfw-initramfs
BOARDNAME = TL-WDR6500-v2
DEVICE_PROFILE = TLWDR6500V2
TPLINK_HWID := 0x65000002
TPLINK_HEADER_VERSION := 2
endef
TARGET_DEVICES += tl-wdr6500-v2
define Device/tl-wdr3320-v2
$(Device/tplink-4mlzma)
BOARDNAME = TL-WDR3320-v2
DEVICE_PROFILE = TLWDR3320V2
TPLINK_HWID := 0x33200002
TPLINK_HEADER_VERSION := 2
endef
TARGET_DEVICES += tl-wdr3320-v2
define Device/archer-c5-v1
$(Device/tplink-16mlzma)
BOARDNAME := ARCHER-C5
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0xc5000001
endef
define Device/archer-c7-v1
$(Device/tplink-8mlzma)
BOARDNAME := ARCHER-C7
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0x75000001
endef
define Device/archer-c7-v2
$(Device/tplink-16mlzma)
BOARDNAME := ARCHER-C7
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0xc7000002
endef
define Device/tl-wdr7500-v3
$(Device/tplink-8mlzma)
BOARDNAME := ARCHER-C7
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0x75000003
endef
TARGET_DEVICES += archer-c5-v1 archer-c7-v1 archer-c7-v2 tl-wdr7500-v3
define Device/antminer-s1
$(Device/tplink-8mlzma)
BOARDNAME := ANTMINER-S1
DEVICE_PROFILE := ANTMINERS1
TPLINK_HWID := 0x04440101
CONSOLE := ttyATH0,115200
endef
define Device/antminer-s3
$(Device/tplink-8mlzma)
BOARDNAME := ANTMINER-S3
DEVICE_PROFILE := ANTMINERS3
TPLINK_HWID := 0x04440301
CONSOLE := ttyATH0,115200
endef
define Device/el-m150
$(Device/tplink-8mlzma)
BOARDNAME := EL-M150
DEVICE_PROFILE := ELM150
TPLINK_HWID := 0x01500101
CONSOLE := ttyATH0,115200
endef
define Device/el-mini
$(Device/tplink-8mlzma)
BOARDNAME := EL-MINI
DEVICE_PROFILE := ELMINI
TPLINK_HWID := 0x01530001
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += antminer-s1 antminer-s3 el-m150 el-mini
define Device/gl-inet-6408A-v1
$(Device/tplink-8mlzma)
BOARDNAME := GL-INET
DEVICE_PROFILE := GLINET
TPLINK_HWID := 0x08000001
CONSOLE := ttyATH0,115200
endef
define Device/gl-inet-6416A-v1
$(Device/tplink-16mlzma)
BOARDNAME := GL-INET
DEVICE_PROFILE := GLINET
TPLINK_HWID := 0x08000001
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1
define Device/rnx-n360rt
$(Device/tplink-4m)
BOARDNAME := TL-WR941ND
DEVICE_PROFILE := RNXN360RT
TPLINK_HWID := 0x09410002
TPLINK_HWREV := 0x00420001
endef
TARGET_DEVICES += rnx-n360rt
define Device/mc-mac1200r
$(Device/tplink-8mlzma)
BOARDNAME := MC-MAC1200R
DEVICE_PROFILE := MAC1200R
TPLINK_HWID := 0x12000001
endef
TARGET_DEVICES += mc-mac1200r
define Device/minibox-v1
$(Device/tplink-16mlzma)
BOARDNAME := MINIBOX-V1
DEVICE_PROFILE := MINIBOXV1
TPLINK_HWID := 0x3C000201
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += minibox-v1
define Device/onion-omega
$(Device/tplink-16mlzma)
BOARDNAME := ONION-OMEGA
DEVICE_PROFILE := OMEGA
TPLINK_HWID := 0x04700001
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += onion-omega
define Device/tl-mr10u-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR10U
DEVICE_PROFILE := TLMR10U
TPLINK_HWID := 0x00100101
CONSOLE := ttyATH0,115200
endef
define Device/tl-mr11u-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR11U
DEVICE_PROFILE := TLMR11U
TPLINK_HWID := 0x00110101
CONSOLE := ttyATH0,115200
endef
define Device/tl-mr11u-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR11U
DEVICE_PROFILE := TLMR11U
TPLINK_HWID := 0x00110102
CONSOLE := ttyATH0,115200
endef
define Device/tl-mr12u-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR13U
DEVICE_PROFILE := TLMR12U
TPLINK_HWID := 0x00120101
CONSOLE := ttyATH0,115200
endef
define Device/tl-mr13u-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR13U
DEVICE_PROFILE := TLMR13U
TPLINK_HWID := 0x00130101
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-mr10u-v1 tl-mr11u-v1 tl-mr11u-v2 tl-mr12u-v1 tl-mr13u-v1
define Device/tl-mr3020-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR3020
DEVICE_PROFILE := TLMR3020
TPLINK_HWID := 0x30200001
CONSOLE := ttyATH0,115200
endef
define Device/tl-mr3040-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR3040
DEVICE_PROFILE := TLMR3040
TPLINK_HWID := 0x30400001
CONSOLE := ttyATH0,115200
endef
define Device/tl-mr3040-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR3040-v2
DEVICE_PROFILE := TLMR3040
TPLINK_HWID := 0x30400002
CONSOLE := ttyATH0,115200
endef
define Device/tl-mr3220-v1
$(Device/tplink-4m)
BOARDNAME := TL-MR3220
DEVICE_PROFILE := TLMR3220
TPLINK_HWID := 0x32200001
endef
define Device/tl-mr3220-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR3220-v2
DEVICE_PROFILE := TLMR3220
TPLINK_HWID := 0x32200002
CONSOLE := ttyATH0,115200
endef
define Device/tl-mr3420-v1
$(Device/tplink-4m)
BOARDNAME := TL-MR3420
DEVICE_PROFILE := TLMR3420
TPLINK_HWID := 0x34200001
endef
define Device/tl-mr3420-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-MR3420-v2
DEVICE_PROFILE := TLMR3420
TPLINK_HWID := 0x34200002
endef
TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2
define Device/tl-wr703n-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR703N
DEVICE_PROFILE := TLWR703
TPLINK_HWID := 0x07030101
CONSOLE := ttyATH0,115200
endef
define Device/tl-wr710n-v1
$(Device/tplink-8mlzma)
BOARDNAME := TL-WR710N
DEVICE_PROFILE := TLWR710
TPLINK_HWID := 0x07100001
CONSOLE := ttyATH0,115200
endef
define Device/tl-wr710n-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR710N
DEVICE_PROFILE := TLWR710
TPLINK_HWID := 0x07100002
CONSOLE := ttyATH0,115200
endef
define Device/tl-wr720n-v3
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR720N-v3
DEVICE_PROFILE := TLWR720
TPLINK_HWID := 0x07200103
CONSOLE := ttyATH0,115200
endef
define Device/tl-wr720n-v4
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR720N-v3
DEVICE_PROFILE := TLWR720
TPLINK_HWID := 0x07200104
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wr703n-v1 tl-wr710n-v1 tl-wr710n-v2 tl-wr720n-v3 tl-wr720n-v4
define Device/tl-wr740n-v1
$(Device/tplink-4m)
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR740
TPLINK_HWID := 0x07400001
endef
define Device/tl-wr740n-v3
$(Device/tplink-4m)
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR740
TPLINK_HWID := 0x07400003
endef
define Device/tl-wr740n-v4
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR741ND-v4
DEVICE_PROFILE := TLWR740
TPLINK_HWID := 0x07400004
CONSOLE := ttyATH0,115200
endef
define Device/tl-wr740n-v5
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR741ND-v4
DEVICE_PROFILE := TLWR740
TPLINK_HWID := 0x07400005
CONSOLE := ttyATH0,115200
endef
define Device/tl-wr741nd-v1
$(Device/tplink-4m)
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR741
TPLINK_HWID := 0x07410001
endef
define Device/tl-wr741nd-v2
$(Device/tplink-4m)
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR741
TPLINK_HWID := 0x07410001
endef
define Device/tl-wr741nd-v4
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR741ND-v4
DEVICE_PROFILE := TLWR741
TPLINK_HWID := 0x07410004
CONSOLE := ttyATH0,115200
endef
define Device/tl-wr741nd-v5
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR741ND-v4
DEVICE_PROFILE := TLWR741
TPLINK_HWID := 0x07400005
CONSOLE := ttyATH0,115200
endef
define Device/tl-wr743nd-v1
$(Device/tplink-4m)
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR743
TPLINK_HWID := 0x07430001
endef
define Device/tl-wr743nd-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR741ND-v4
DEVICE_PROFILE := TLWR743
TPLINK_HWID := 0x07430002
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wr740n-v1 tl-wr740n-v3 tl-wr740n-v4 tl-wr740n-v5 tl-wr741nd-v1 tl-wr741nd-v2 tl-wr741nd-v4 tl-wr741nd-v5 tl-wr743nd-v1 tl-wr743nd-v2
define Device/tl-wr841nd-v1.5
$(Device/tplink-4m)
BOARDNAME := TL-WR841N-v1.5
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410002
TPLINK_HWREV := 2
endef
define Device/tl-wr841nd-v3
$(Device/tplink-4m)
BOARDNAME := TL-WR941ND
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410003
TPLINK_HWREV := 3
endef
define Device/tl-wr841nd-v5
$(Device/tplink-4m)
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410005
endef
define Device/tl-wr841nd-v7
$(Device/tplink-4m)
BOARDNAME := TL-WR841N-v7
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410007
endef
define Device/tl-wr841n-v8
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR841N-v8
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410008
endef
define Device/tl-wr841n-v9
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR841N-v9
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410009
endef
define Device/tl-wr841n-v10
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR841N-v9
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410010
endef
define Device/tl-wr842n-v1
$(Device/tplink-8m)
BOARDNAME := TL-MR3420
DEVICE_PROFILE := TLWR842
TPLINK_HWID := 0x08420001
endef
define Device/tl-wr842n-v2
$(Device/tplink-8mlzma)
BOARDNAME := TL-WR842N-v2
DEVICE_PROFILE := TLWR842
TPLINK_HWID := 0x8420002
endef
define Device/tl-wr843nd-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR841N-v8
DEVICE_PROFILE := TLWR843
TPLINK_HWID := 0x08430001
endef
define Device/tl-wr847n-v8
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR841N-v8
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08470008
endef
TARGET_DEVICES += tl-wr841nd-v1.5 tl-wr841nd-v3 tl-wr841nd-v5 tl-wr841nd-v7 tl-wr841n-v8 tl-wr841n-v9 tl-wr841n-v10 tl-wr842n-v1 tl-wr842n-v2 tl-wr843nd-v1 tl-wr847n-v8
define Device/tl-wr941nd-v2
$(Device/tplink-4m)
BOARDNAME := TL-WR941ND
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410002
TPLINK_HWREV := 2
endef
define Device/tl-wr941nd-v3
$(Device/tplink-4m)
BOARDNAME := TL-WR941ND
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410002
TPLINK_HWREV := 2
endef
define Device/tl-wr941nd-v4
$(Device/tplink-4m)
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410004
endef
define Device/tl-wr941nd-v5
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR941ND-v5
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410005
endef
define Device/tl-wr941nd-v6
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR941ND-v6
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410006
endef
# Chinese version (unlike European) is similar to the TL-WDR3500
define Device/tl-wr941nd-v6-cn
$(Device/tplink-4mlzma)
BOARDNAME := TL-WDR3500
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410006
endef
TARGET_DEVICES += tl-wr941nd-v2 tl-wr941nd-v3 tl-wr941nd-v4 tl-wr941nd-v5 tl-wr941nd-v6 tl-wr941nd-v6-cn
define Device/tl-wr1041n-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR1041N-v2
DEVICE_PROFILE := TLWR1041
TPLINK_HWID := 0x10410002
endef
TARGET_DEVICES += tl-wr1041n-v2
define Device/tl-wr1043nd-v1
$(Device/tplink-8m)
BOARDNAME := TL-WR1043ND
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430001
endef
define Device/tl-wr1043nd-v2
$(Device/tplink-8mlzma)
BOARDNAME := TL-WR1043ND-v2
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430002
endef
define Device/tl-wr1043nd-v3
$(Device/tplink-8mlzma)
BOARDNAME := TL-WR1043ND-v2
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430003
endef
TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3
define Device/tl-wr2543-v1
$(Device/tplink-8mlzma)
BOARDNAME := TL-WR2543N
DEVICE_PROFILE := TLWR2543
TPLINK_HWID := 0x25430001
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade "-v 3.13.99"
IMAGE/factory.bin := append-rootfs | mktplinkfw factory "-v 3.13.99"
endef
TARGET_DEVICES += tl-wr2543-v1
define Device/tl-wdr4900-v2
$(Device/tplink-8mlzma)
BOARDNAME := TL-WDR4900-v2
DEVICE_PROFILE := TLWDR4900V2
TPLINK_HWID := 0x49000002
endef
TARGET_DEVICES += tl-wdr4900-v2
define Device/tl-wa701n-v1
$(Device/tplink-4m)
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA701
TPLINK_HWID := 0x07010001
endef
define Device/tl-wa701nd-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-WA701ND-v2
DEVICE_PROFILE := TLWA701
TPLINK_HWID := 0x07010002
CONSOLE := ttyATH0,115200
endef
define Device/tl-wa730rev1
$(Device/tplink-4m)
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA730RE
TPLINK_HWID := 0x07300001
endef
define Device/tl-wa750re-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-WA750RE
DEVICE_PROFILE := TLWA750
TPLINK_HWID := 0x07500001
endef
define Device/tl-wa7510n
$(Device/tplink-4m)
BOARDNAME := TL-WA7510N
DEVICE_PROFILE := TLWA7510
TPLINK_HWID := 0x75100001
endef
TARGET_DEVICES += tl-wa701n-v1 tl-wa701nd-v2 tl-wa730rev1 tl-wa750re-v1 tl-wa7510n
define Device/tl-wa801nd-v1
$(Device/tplink-4m)
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA801
TPLINK_HWID := 0x08010001
endef
define Device/tl-wa801nd-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-WA801ND-v2
DEVICE_PROFILE := TLWA801
TPLINK_HWID := 0x08010002
endef
define Device/tl-wa830re-v1
$(Device/tplink-4m)
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA830
TPLINK_HWID := 0x08300010
endef
define Device/tl-wa830re-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-WA830RE-v2
DEVICE_PROFILE := TLWA830
TPLINK_HWID := 0x08300002
endef
define Device/tl-wa850re-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-WA850RE
DEVICE_PROFILE := TLWA850
TPLINK_HWID := 0x08500001
endef
define Device/tl-wa860re-v1
$(Device/tplink-4mlzma)
BOARDNAME := TL-WA860RE
DEVICE_PROFILE := TLWA860
TPLINK_HWID := 0x08600001
endef
TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1
define Device/tl-wa901nd-v1
$(Device/tplink-4m)
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA901
TPLINK_HWID := 0x09010001
endef
define Device/tl-wa901nd-v2
$(Device/tplink-4m)
BOARDNAME := TL-WA901ND-v2
DEVICE_PROFILE := TLWA901
TPLINK_HWID := 0x09010002
endef
define Device/tl-wa901nd-v3
$(Device/tplink-4mlzma)
BOARDNAME := TL-WA901ND-v3
DEVICE_PROFILE := TLWA901
TPLINK_HWID := 0x09010003
endef
TARGET_DEVICES += tl-wa901nd-v1 tl-wa901nd-v2 tl-wa901nd-v3
define Device/tl-wa7210n-v2
$(Device/tplink-4mlzma)
BOARDNAME := TL-WA7210N-v2
DEVICE_PROFILE := TLWA7210
TPLINK_HWID := 0x72100002
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wa7210n-v2
define Device/smart-300
$(Device/tplink-8mlzma)
BOARDNAME := SMART-300
DEVICE_PROFILE := SMART-300
TPLINK_HWID := 0x93410001
endef
TARGET_DEVICES += smart-300
define Device/oolite
$(Device/tplink-16mlzma)
BOARDNAME := GS-OOLITE
DEVICE_PROFILE := OOLITE
TPLINK_HWID := 0x3C000101
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += oolite
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
define Device/ubnt-xm
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
UBNT_TYPE := XM
UBNT_BOARD := XM
UBNT_CHIP := ar7240
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-xw
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
UBNT_TYPE := XW
UBNT_BOARD := XM
UBNT_CHIP := ar934x
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-bz
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
UBNT_TYPE := BZ
UBNT_BOARD := XM
UBNT_CHIP := ar934x
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/rw2458n
$(Device/ubnt-xm)
BOARDNAME := RW2458N
endef
define Device/ubnt-airrouter
$(Device/ubnt-xm)
BOARDNAME := UBNT-AR
endef
define Device/ubnt-bullet-m
$(Device/ubnt-xm)
BOARDNAME := UBNT-BM
endef
define Device/ubnt-rocket-m
$(Device/ubnt-xm)
BOARDNAME := UBNT-RM
endef
define Device/ubnt-nano-m
$(Device/ubnt-xm)
BOARDNAME := UBNT-NM
endef
TARGET_DEVICES += rw2458n ubnt-airrouter ubnt-bullet-m ubnt-rocket-m ubnt-nano-m
define Device/ubnt-unifi
$(Device/ubnt-bz)
BOARDNAME := UBNT-UF
DEVICE_PROFILE := UBNT UBNTUNIFI
endef
define Device/ubnt-unifi-outdoor
$(Device/ubnt-bz)
BOARDNAME := UBNT-U20
DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
endef
TARGET_DEVICES += ubnt-unifi ubnt-unifi-outdoor
define Device/ubnt-nano-m-xw
$(Device/ubnt-xw)
BOARDNAME := UBNT-NM-XW
endef
define Device/ubnt-loco-m-xw
$(Device/ubnt-xw)
BOARDNAME := UBNT-LOCO-XW
endef
define Device/ubnt-rocket-m-xw
$(Device/ubnt-xw)
BOARDNAME := UBNT-RM-XW
endef
define Device/ubnt-rocket-m-ti
$(Device/ubnt-xw)
BOARDNAME := UBNT-RM-TI
UBNT_TYPE := TI
UBNT_BOARD := XM
endef
TARGET_DEVICES += ubnt-nano-m-xw ubnt-loco-m-xw ubnt-rocket-m-xw ubnt-rocket-m-ti
define Device/ubnt-air-gateway
$(Device/ubnt-xm)
BOARDNAME := UBNT-AGW
UBNT_BOARD := XM
UBNT_TYPE := AirGW
UBNT_CHIP := ar933x
CONSOLE = ttyATH0,115200
endef
TARGET_DEVICES += ubnt-air-gateway
define Device/ubnt-air-gateway-pro
$(Device/ubnt-xm)
BOARDNAME := UBNT-AGWP
UBNT_TYPE := AirGWP
UBNT_CHIP := ar934x
CONSOLE = ttyS0,115200
endef
TARGET_DEVICES += ubnt-air-gateway-pro
define Device/ubdev01
$(Device/ubnt-xm)
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
BOARDNAME := UBNT-UF
UBNT_BOARD := XM
UBNT_TYPE := XM
UBNT_CHIP := ar7240
endef
TARGET_DEVICES += ubdev01
define Device/ubnt-routerstation
IMAGE_SIZE := 16128k
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = append-rootfs | pad-rootfs | mkubntimage
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
endef
define Device/ubnt-rs
$(Device/ubnt-routerstation)
BOARDNAME := UBNT-RS
DEVICE_PROFILE := Madwifi UBNT UBNTRS
UBNT_BOARD := RS
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
endef
define Device/ubnt-rspro
$(Device/ubnt-routerstation)
BOARDNAME := UBNT-RSPRO
DEVICE_PROFILE := Madwifi UBNT UBNTRSPRO
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
endef
define Device/ubnt-ls-sr71
$(Device/ubnt-routerstation)
BOARDNAME := UBNT-LS-SR71
DEVICE_PROFILE := Madwifi UBNT
UBNT_BOARD := LS-SR71
UBNT_TYPE := LS-SR71
UBNT_CHIP := ar7100
endef
TARGET_DEVICES += ubnt-rs ubnt-rspro ubnt-ls-sr71
define Device/ubnt-uap-pro
KERNEL_SIZE := 1536k
IMAGE_SIZE := 15744k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
UBNT_TYPE := BZ
UBNT_CHIP := ar934x
BOARDNAME := UAP-PRO
DEVICE_PROFILE := UBNT UAPPRO
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage2
endef
define Device/ubnt-unifi-outdoor-plus
$(Device/ubnt-uap-pro)
UBNT_CHIP := ar7240
BOARDNAME := UBNT-UOP
DEVICE_PROFILE := UBNT
endef
TARGET_DEVICES += ubnt-uap-pro ubnt-unifi-outdoor-plus
rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
# $(1): rootfs type.
# $(2): board name.
define imgname
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
endef
define rootfs_align
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef
define sysupname
$(call imgname,$(1),$(2))-sysupgrade.bin
endef
define factoryname
$(call imgname,$(1),$(2))-factory.bin
endef
COMMA:=,
define mkcmdline
$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3))
endef
define mtdpartsize
$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024)))
endef
SINGLE_PROFILES:=
# $(1) : name of image build method to be used, e.g., AthLzma.
# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
# $(3) : name of the profile to be defined.
# $(4) : board name.
# $(5)~$(7) : arguments for $(mkcmdline)
# board=$(1) console=$(2),$(3)
# $(8)~$(14): extra arguments.
define SingleProfile
# $(1): action name, e.g. loader, buildkernel, squashfs, etc.
define Image/Build/Profile/$(3)
$$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
endef
SINGLE_PROFILES += $(3)
endef
# $(1), name of the MultiProfile to be added.
# $(2), name of Profiles to be included in the MultiProfile.
define MultiProfile
define Image/Build/Profile/$(1)
$(foreach p,$(2),
$$(call Image/Build/Profile/$p,$$(1))
)
endef
endef
LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
# $(1): input file.
# $(2): output file.
# $(3): extra arguments for lzma.
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
endef
define PatchKernel
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
endef
define PatchKernel/initramfs
$(call PatchKernel,$(1),$(2),-initramfs)
cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
endef
# $(1): board name.
# $(2): kernel command line.
# $(3): extra argumetns for lzma.
# $(4): name suffix, e.g. "-initramfs".
define PatchKernelLzma
cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
$(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3))
endef
define PatchKernelGzip
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz
endef
ifneq ($(SUBTARGET),mikrotik)
# $(1): compression method of the data.
# $(2): extra arguments.
# $(3): input data file.
# $(4): output file.
define MkuImage
mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(3) $(4)
endef
# $(1): board name.
# $(2): kernel command line.
# $(3): extra arguments for lzma.
# $(4): name suffix, e.g. "-initramfs".
# $(5): extra arguments for mkimage.
define MkuImageLzma
$(call PatchKernelLzma,$(1),$(2),$(3),$(4))
$(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
endef
define MkuImageLzma/initramfs
$(call PatchKernelLzma,$(1),$(2),$(3),-initramfs)
$(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin)
endef
define MkuImageGzip
$(call PatchKernelGzip,$(1),$(2))
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage)
endef
define MkuImageGzip/initramfs
$(call PatchKernelGzip,$(1),$(2),-initramfs)
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin)
endef
define MkuImageOKLI
$(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli)
endef
endif
# $(1): name of the 1st file.
# $(2): size limit of the 1st file if it is greater than 262144, or
# the erase size of the flash if it is greater than zero and less
# than 262144
# $(3): name of the 2nd file.
# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
# it is the size limit of the output file
# $(5): name of the output file.
# $(6): padding size.
define CatFiles
if [ $(2) -eq 0 ]; then \
filename="$(3)"; fstype=$$$${filename##*\.}; \
case "$$$${fstype}" in \
"jffs2-64k") bs=65536;; \
"jffs2-128k") bs=131072;; \
"jffs2-256k") bs=262144;; \
*) bs=`stat -c%s $(1)`;; \
esac; \
( dd if=$(1) bs=$$$${bs} conv=sync; cat $(3) ) > $(5); \
if [ -n "$(6)" ]; then \
case "$$$${fstype}" in \
squashfs*) \
padjffs2 $(5) $(6); \
;; \
esac; \
fi; \
if [ `stat -c%s $(5)` -gt $(4) ]; then \
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
rm -f $(5); \
fi; \
else if [ $(2) -gt 262144 ]; then \
if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \
else if [ `stat -c%s $(3)` -gt $(4) ]; then \
echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \
else \
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
fi; fi; \
else \
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
if [ `stat -c%s $(5)` -gt $(4) ]; then \
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
rm -f $(5); \
fi; \
fi; fi
endef
# $(1): rootfs type.
# $(2): board name.
# $(3): kernel image size limit.
# $(4): rootfs image size limit.
# $(5): padding argument for padjffs2.
Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
# $(1): ubinize ini file
# $(2): working directory
# $(3): output file
# $(4): physical erase block size
# $(5): minimum I/O unit size
# $(6): custom options
define ubinize
$(CP) $(1) $(2)
( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
endef
#
# Embed lzma-compressed kernel inside lzma-loader.
#
# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
# $(2), suffix of target file to build, e.g. bin, gz, elf
# $(3), kernel command line to pass from lzma-loader to kernel
# $(4), unused here
# $(5), suffix of kernel filename, e.g. -initramfs, or empty
define Image/BuildLoader
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \
compile loader.$(2)
-$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
endef
#
# Embed patched lzma-compressed kernel inside lzma-loader.
#
# Specifying the command line via the lzma-loader doesn't work with some
# models (like the TP-LINK CPE series), so this version first patches the
# command line in the image and then builds the loader around it.
#
# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
# $(2), suffix of target file to build, e.g. bin, gz, elf
# $(3), kernel command line to pass from lzma-loader to kernel
# $(4), unused here
# $(5), suffix of kernel filename, e.g. -initramfs, or empty
define Image/BuildLoaderPatched
$(call PatchKernelLzma,$(1),$(3))
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(1).$(2) \
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
LOADER_DATA="$(KDIR_TMP)/vmlinux-$(1)$(5).bin.lzma" BOARD="$(1)" \
compile loader.$(2)
-$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
endef
#
# Build lzma-loader alone which will search for lzma-compressed kernel identified by
# uImage header with magic "OKLI" at boot time.
#
# $(4), offset into the flash space to start searching uImage magic "OKLI".
# $(5), size of search range starting at $(4). With 0 as the value, uImage
# header is expected to be at precisely $(4)
define Image/BuildLoaderAlone
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \
compile loader.$(2)
endef
define Build/Clean
$(LOADER_MAKE) clean
endef
alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware)
alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)
all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro
ap81_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,5120k(rootfs),2688k(kernel),64k(art)ro,7808k@0x50000(firmware)
ap83_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,4096k(rootfs),3648k(kernel),64k(art)ro,7744k@0x60000(firmware)
ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware)
ap113_mtd_layout=mtdparts=spi0.0:64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRAM),64k(ART),3904k@0x10000(firmware)
ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k@0x10000(firmware)
ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2448k(rootfs),1200k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art),7808k@0x50000(firmware)
ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware)
ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art),16000k@0x50000(firmware)
ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware)
cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro
dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art)
ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k@0x20000(firmware)
mr12_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware)
mr16_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware)
pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware)
wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware)
wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
cp $(KDIR)/vmlinux $(VMLINUX).bin
dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync
$(call MkuImage,gzip,,$(KDIR)/vmlinux.bin.gz,$(UIMAGE)-gzip.bin)
$(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
-mkdir -p $(KDIR_TMP)
$(call Image/Build/Profile/$(IMAGE_PROFILE),buildkernel)
endef
define Image/BuildKernel/Initramfs
cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync
dd if=$(KDIR)/vmlinux-initramfs.bin.gz of=$(VMLINUX)-initramfs.gz bs=65536 conv=sync
$(call MkuImage,gzip,,$(KDIR)/vmlinux-initramfs.bin.gz,$(UIMAGE)-initramfs-gzip.bin)
$(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin)
cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf
$(call Image/Build/Initramfs)
endef
Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3))
define Image/Build/WRT400N
$(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \
fi
endef
define Image/Build/CameoAP94/buildkernel
$(call MkuImageLzma,$(2),$(3) $(4))
$(call MkuImageLzma,$(2)-fat,$(3) $(5))
endef
define Image/Build/CameoAP94
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval fwsize_fat=$(call mtdpartsize,firmware,$(5)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
dd if=$(call sysupname,$(1),$(2)); \
echo -n "$(6)"; \
) > $(call imgname,$(1),$(2))-backup-loader.bin; \
if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \
echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \
else \
( \
dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \
echo -n "$(7)"; \
) > $(call factoryname,$(1),$(2)); \
fi; \
fi
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \
echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \
sh $(TOPDIR)/scripts/combined-image.sh \
"$(KDIR_TMP)/$(2)-fat.bin" \
"$(KDIR_TMP)/$(2)-fat.dummy" \
$(call sysupname,$(1),$(2)-fat); \
fi
endef
define Image/Build/WZRHP
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(3)-4*$(4)*1024)),$(4))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
dd if=$(call sysupname,$(1),$(2)); \
) > $(call imgname,$(1),$(2))-tftp.bin; \
buffalo-enc -p $(5) -v 1.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(KDIR_TMP)/$(2).enc; \
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
-i $(KDIR_TMP)/$(2).enc \
-o $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3))
Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4))
Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3))
Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4))
Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/WHRHPG300N
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
dd if=$(call sysupname,$(1),$(2)); \
) > $(call imgname,$(1),$(2))-tftp.bin; \
buffalo-enc -p $(5) -v 1.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(KDIR_TMP)/$(2).enc; \
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
-i $(KDIR_TMP)/$(2).enc \
-o $(call factoryname,$(1),$(2)); \
fi
endef
define Image/Build/Cameo
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
factory_size=$$$$(($(fwsize) - $(6))); \
( \
dd if=$(call sysupname,$(1),$(2)) bs=$$$${factory_size} conv=sync; \
echo -n $(5); \
) > $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout))
Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536)
Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout))
Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout))
Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536)
Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout))
Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout))
Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M))
Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26)
Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M))
define Image/Build/CameoHornet
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
for r in $(7); do \
[ -n "$$$$r" ] && dashr="-$$$$r" || dashr=; \
[ -z "$$$$r" ] && r="DEF"; \
mkcameofw -M HORNET -R "$$$$r" -S $(5) -V $(6) -c \
-K $(8) -I $(fwsize) \
-k "$(call sysupname,$(1),$(2))" \
-o $(call imgname,$(1),$(2))-factory$$$$dashr.bin; \
true; \
done; \
fi
endef
Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout))
Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000)
Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout))
Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
define Image/Build/dLAN
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
if [ -e "$(call factoryname,$(1),$(2))" ]; then \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
fi
endef
Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Ath
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
fi
endef
Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4))
Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4))
Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Belkin
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
-n "uImage" \
-i $(KDIR_TMP)/vmlinux-$(2).uImage \
-o $(KDIR_TMP)/$(2)-uImage; \
edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
-n "rootfs" \
-i $(KDIR)/root.$(1) \
-o $(KDIR_TMP)/$(2)-rootfs; \
( \
dd if=$(KDIR_TMP)/$(2)-rootfs; \
dd if=$(KDIR_TMP)/$(2)-uImage; \
) > "$(call factoryname,$(1),$(2))"; \
fi
endef
define Image/Build/EnGenius
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
mksenaofw -e $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.dlf \
-r 0x101 -p $(7) -t 2; \
fi
endef
Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define MkuImageHiWiFi
# Field ih_name needs to start with "tw150v1"
mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
-e 0x80060000 -n 'tw150v1 MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(3) $(4)
endef
define MkuImageLzmaHiWiFi
$(call PatchKernelLzma,$(1),$(2),$(3),$(4))
$(call MkuImageHiWiFi,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
endef
Image/Build/HiWiFi/buildkernel=$(call MkuImageLzmaHiWiFi,$(2),$(3) $(4))
Image/Build/HiWiFi=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/HiWiFi/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
define Image/Build/PB4X
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
-sh $(TOPDIR)/scripts/combined-image.sh \
"$(call imgname,kernel,$(2)).bin" \
"$(call imgname,$(1),$(2)-rootfs).bin" \
$(call sysupname,$(1),$(2))
endef
Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3))
Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3))
define Image/Build/MyLoader
$(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024))))
$(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin)
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
if [ -e "$(fwimage)" ]; then \
$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \
-p0x00030000:0:al:0x80060000:firmware:$(fwimage) \
$(call imgname,$(1),$(2))-$(5)-factory.img; \
echo -n "" > $(KDIR_TMP)/empty.bin; \
sh $(TOPDIR)/scripts/combined-image.sh \
$(fwimage) $(KDIR_TMP)/empty.bin \
$(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \
fi
endef
Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout))
Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0)
define Image/Build/Planex/buildkernel
[ -e "$(KDIR)/loader-$(2).gz" ]
$(call MkuImageOKLI,$(2))
( \
dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \
dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \
) > $(KDIR_TMP)/kernel-$(2).bin
$(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage)
endef
define Image/Build/Planex
$(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
$(STAGING_DIR_HOST)/bin/mkplanexfw \
-B $(2) \
-v 2.00.00 \
-i $(call sysupname,$(1),$(2)) \
-o $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/ALFA
$(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
rm -rf $(KDIR)/$(1); \
mkdir -p $(KDIR)/$(1); \
cd $(KDIR)/$(1); \
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \
cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \
$(TAR) zcf $(call factoryname,$(1),$(2)) -C $(KDIR)/$(1) $(7) $(8); \
( \
echo WRM7222C | dd bs=32 count=1 conv=sync; \
echo -ne '\xfe'; \
) >> $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/Seama/loader=$(call Image/BuildLoader,$(1),bin,$(2) $(3),0x80060000)
define Image/Build/Seama
[ -e "$(KDIR)/loader-$(2).bin" ]
$(call CompressLzma,$(KDIR)/loader-$(2).bin,$(KDIR_TMP)/loader-$(2).bin.lzma)
-rm -f $(KDIR_TMP)/image-$(2).tmp
$(call CatFiles,$(KDIR_TMP)/loader-$(2).bin.lzma,$$$$(($(6) - 64)),$(KDIR)/root.$(1),$(7),$(KDIR_TMP)/image-$(2).tmp)
[ -e "$(KDIR_TMP)/image-$(2).tmp" ] && { \
head -c -4 "$(KDIR_TMP)/image-$(2).tmp" > "$(KDIR_TMP)/image-$(2).no-jffs2mark.tmp"; \
$(STAGING_DIR_HOST)/bin/seama \
-i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp \
-m "dev=/dev/mtdblock/1" -m "type=firmware"; \
$(STAGING_DIR_HOST)/bin/seama \
-s $(call imgname,$(1),$(2))-factory.bin \
-m "signature=$(5)" \
-i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp.seama; \
tail -c 4 "$(KDIR_TMP)/image-$(2).tmp" >> $(call imgname,$(1),$(2))-factory.bin; \
}
cat $(KDIR_TMP)/loader-$(2).bin.lzma > $(KDIR_TMP)/image-$(2)-sysupgrade.tmp
$(STAGING_DIR_HOST)/bin/seama \
-i $(KDIR_TMP)/image-$(2)-sysupgrade.tmp \
-m "dev=/dev/mtdblock/1" -m "type=firmware"
$(call CatFiles,$(KDIR_TMP)/image-$(2)-sysupgrade.tmp.seama,$(6),$(KDIR)/root.$(1),$(7),$(call sysupname,$(1),$(2)))
endef
define Image/Build/Seama/initramfs
$(call PatchKernelLzma,$(2),$(3) $(4),,-initramfs)
$(STAGING_DIR_HOST)/bin/seama \
-i $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma \
-m "dev=/dev/mtdblock/1" -m "type=firmware"
cat $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.seama > $(call imgname,initramfs,$(2))-seama.bin
endef
Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Senao
mkdir -p $(KDIR_TMP)/$(2)/
touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2)
-$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync
dd if=$(KDIR)/root.$(1) \
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync
( \
cd $(KDIR_TMP)/$(2)/; \
$(TAR) -cz -f $(call factoryname,$(1),$(2)) * \
)
-rm -rf $(KDIR_TMP)/$(2)/
-sh $(TOPDIR)/scripts/combined-image.sh \
$(KDIR_TMP)/vmlinux-$(2).uImage \
$(KDIR)/root.$(1) \
$(call sysupname,$(1),$(2))
endef
Image/Build/TPLINK-SAFELOADER/loader = $(call Image/BuildLoaderPatched,$(1),elf,$(2) $(3))
define Image/Build/TPLINK-SAFELOADER
[ -e "$(KDIR)/loader-$(2).elf" ]
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(5) \
-k $(KDIR)/loader-$(2).elf \
-r $(KDIR)/root.$(1) \
-V $(REVISION) \
-j \
-o $(call factoryname,$(1),$(2))
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(5) \
-k $(KDIR)/loader-$(2).elf \
-r $(KDIR)/root.$(1) \
-V $(REVISION) \
-j -S \
-o $(call sysupname,$(1),$(2))
endef
define Image/Build/CyberTAN
echo -n '' > $(KDIR_TMP)/empty.bin
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
-f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1)
-$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \
-i $(KDIR)/image.tmp \
-o $(call sysupname,$(1),$(2))
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1)
-$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \
-i $(KDIR)/image.tmp \
-o $(call factoryname,$(1),$(2))
rm $(KDIR)/image.tmp
endef
Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000)
Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage)
Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
define Image/Build/Netgear/buildkernel
$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
-rm -rf $(KDIR_TMP)/$(2)
mkdir -p $(KDIR_TMP)/$(2)/image
cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \
-noappend -root-owned -be -b 65536
( \
cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \
dd if=/dev/zero bs=1k count=1 \
) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2
mkimage -A mips -O linux -T filesystem -C none -M $(5) \
-a 0xbf070000 -e 0xbf070000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \
$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs
endef
define Image/Build/Netgear
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
if [ -e $(call sysupname,$(1),$(2)) ]; then \
for r in $(7) ; do \
[ -n "$$$$r" ] && dashr="-$$$$r" || dashr= ; \
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory$$$$dashr.img; \
done; \
fi
endef
Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
define Image/Build/NetgearLzma
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
endef
Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
# $(1): (empty)
# $(2): Board name (small caps)
# $(3): Kernel board specific cmdline
# $(4): Kernel mtdparts definition
# $(5): U-Boot magic
define Image/Build/NetgearNAND/buildkernel
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(call PatchKernelLzma,$(2),$(3) $(4),-d20)
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
bs=$$$$(($(kernelsize)-131072-2*64-1)) \
count=1 conv=sync
$(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
# create a fake rootfs image
dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1
mkimage -A mips -O linux -T filesystem -C none \
-a 0xbf070000 -e 0xbf070000 \
-n 'MIPS OpenWrt fakeroot' \
-d $(KDIR_TMP)/fakeroot-$(2) \
-M $(5) \
$(KDIR_TMP)/fakeroot-$(2).uImage
# append the fake rootfs image to the kernel, it will reside in the last
# erase block of the kernel partition
cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage
endef
# $(1): rootfs image suffix
# $(2): Board name (small caps)
# $(3): Kernel board specific cmdline
# $(4): Kernel mtdparts definition
# $(5): U-Boot magic
# $(6): Board name (upper caps)
# $(7): firmware region code (not used yet)
# $(8): DNI Hardware version
# $(9): suffix of the configuration file for ubinize
define Image/Build/NetgearNAND
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
$(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
$(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
( \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
dd if=$(KDIR_TMP)/$(2)-root.ubi \
) > $(imageraw)
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
-i $(imageraw) \
-o $(call imgname,ubi,$(2))-factory.img
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
endef
ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh
Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3))
define Image/Build/ZyXEL
$(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
if [ ! -f $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin ]; then \
echo "Warning: $(IMG_PREFIX)-$(2)-u-boot.bin not found" >&2; \
else \
$(STAGING_DIR_HOST)/bin/mkzynfw \
-B $(4) \
-b $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin \
-r $(call sysupname,$(1),$(2)):0x10000 \
-o $(call factoryname,$(1),$(2)); \
fi; fi
endef
endif
define Device/NBG6616
BOARDNAME = NBG6616
KERNEL_SIZE = 2048k
IMAGE_SIZE = 15323k
MTDPARTS = spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
CMDLINE += mem=128M
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage
IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
# We cannot currently build a factory image. It is the sysupgrade image
# prefixed with a header (which is actually written into the MTD device).
# The header is 2kiB and is filled with 0xff. The format seems to be:
# 2 bytes: 0x0000
# 2 bytes: checksum of the data partition (big endian)
# 4 bytes: length of the contained image file (big endian)
# 32 bytes: Firmware Version string (NUL terminated, 0xff padded)
# 2 bytes: 0x0000
# 2 bytes: checksum over the header partition (big endian)
# 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded)
# rest: 0xff padding
#
# The checksums are calculated by adding up all bytes and if a 16bit
# overflow occurs, one is added and the sum is masked to 16 bit:
# csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff };
# Should the file have an odd number of bytes then the byte len-0x800 is
# used additionally.
# The checksum for the header is calcualted over the first 2048 bytes with
# the firmware checksum as the placeholder during calculation.
#
# The header is padded with 0xff to the erase block size of the device.
endef
TARGET_DEVICES += NBG6616
define Image/Build/ZyXELNAND/buildkernel
$(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
$(call MkuImageLzma,$(2),$(3) $(5) $(6))
mkdir -p $(KDIR_TMP)/$(2)/image/boot
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
--pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
-o $(KDIR_TMP)/$(2)-kernel.jffs2 \
-d $(KDIR_TMP)/$(2)/image \
2>&1 1>/dev/null | awk '/^.+$$$$/'
-rm -rf $(KDIR_TMP)/$(2)
endef
define Image/Build/ZyXELNAND
if [ "$(1)" != "squashfs" ]; then \
echo Only squashfs is supported; \
return 0; \
fi
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
$(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
$(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
( \
dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
dd if=$(KDIR_TMP)/$(2)-root.ubi \
) > $(imageraw)
dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
bs=128k conv=sync
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
endef
Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
define Image/Build/OpenMesh
-sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
"$(4)" \
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" \
"$(KDIR_TMP)/vmlinux-$(2).uImage" \
"$(KDIR)/root.$(1)"
-sh $(TOPDIR)/scripts/combined-ext-image.sh \
"$(4)" "$(call factoryname,$(1),$(2))" \
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \
"$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \
"$(KDIR)/root.$(1)" "rootfs"
endef
Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Zcomax
$(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
$(STAGING_DIR_HOST)/bin/mkzcfw \
-B $(2) \
-k $(KDIR_TMP)/vmlinux-$(2).uImage \
-r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
-o $(call imgname,$(1),$(2))-factory.img; \
fi
endef
# $(1): template name to be defined, etc. squashfs-only, 64k, 64kraw, etc.
# $(2): jffs2 blocksize.
define Jffs2Template
define Image/Build/Template/$(1)/jffs2-$(2)
$$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
endef
# $(1): template name to be defined.
# $(2): squashfs suffix to be used.
# $(3): jffs2 suffix to be used.
define BuildTemplate
# $(1) : name of build method.
# $(2) : board name.
# $(3) : kernel command line.
# $(4)~$(8): extra arguments.
define Image/Build/Template/$(1)/initramfs
$$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/loader
$$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/buildkernel
$$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/squashfs
$$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
$(if $(3),$(foreach bs,$(3),$(eval $(call Jffs2Template,$(1),$(bs)))))
endef
$(eval $(call BuildTemplate,squashfs-only))
$(eval $(call BuildTemplate,64k,-64k,64k))
$(eval $(call BuildTemplate,64kraw,-raw,64k))
$(eval $(call BuildTemplate,64kraw-nojffs,-raw))
$(eval $(call BuildTemplate,128k,,128k))
$(eval $(call BuildTemplate,128kraw,-raw,128k))
$(eval $(call BuildTemplate,256k,,256k))
$(eval $(call BuildTemplate,all,,64k 128k 256k))
ifeq ($(SUBTARGET),generic)
$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
$(eval $(call SingleProfile,AthGzip,64k,AP81,ap81,AP81,ttyS0,115200,$$(ap81_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthGzip,64k,AP83,ap83,AP83,ttyS0,115200,$$(ap83_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144))
$(eval $(call SingleProfile,AthLzma,64k,AP113,ap113,AP113,ttyS0,115200,$$(ap113_mtd_layout),RK))
$(eval $(call SingleProfile,AthLzma,64k,AP121_2M,ap121-2M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_2M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP121_4M,ap121-4M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP121MINI,ap121-mini,AP121-MINI,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,DRAGINO2,dragino2,DRAGINO2,ttyATH0,115200,$$(dragino2_mtdlayout),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,MR12,mr12,MR12,ttyS0,115200,$$(mr12_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,MR16,mr16,MR16,ttyS0,115200,$$(mr16_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,""))
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA"))
$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01))
$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01))
$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,64k))
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,64k))
$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
$(eval $(call SingleProfile,HiWiFi,64k,HIWIFI_HC6361,hiwifi-hc6361,HiWiFi-HC6361,ttyATH0,115200,$$(hiwifi_hc6361_mtdlayout),KRuImage))
$(eval $(call SingleProfile,MyLoader,64k,WP543_2M,wp543,,ttyS0,115200,0x200000,2M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32))
$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,WNR2200,"" NA,))
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750))
$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200))
$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
$(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,65536,16187392))
$(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,65536,16187392))
$(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,65536,16121856))
$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N))
$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200))
$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2))
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
$(eval $(call MultiProfile,AP121,AP121_2M AP121_4M AP121_8M))
$(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
$(eval $(call MultiProfile,AP143,AP143_8M AP143_16M))
$(eval $(call MultiProfile,AP147,AP147_010))
$(eval $(call MultiProfile,AP152,AP152_16M))
$(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3))
$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
$(eval $(call MultiProfile,OPENMESH,OM2P OM5P MR600 MR900 MR1750))
$(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
$(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
$(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC))
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
$(eval $(call MultiProfile,WPJ344,WPJ344_16M))
$(eval $(call MultiProfile,WPJ531,WPJ531_16M))
$(eval $(call MultiProfile,WPJ558,WPJ558_16M))
$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES)))
$(eval $(call MultiProfile,Madwifi,EAP7660D WP543))
endif # ifeq ($(SUBTARGET),generic)
ifeq ($(SUBTARGET),nand)
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300))
$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
$(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1))
endif # ifeq ($(SUBTARGET),nand)
$(eval $(call MultiProfile,Default,$(SINGLE_PROFILES)))
define Image/Build/squashfs
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k
$(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64
cp $(KDIR)/root.squashfs-64k $(BIN_DIR)/$(IMG_PREFIX)-root.squashfs-64k
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
endef
define Image/Build/jffs2
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
endef
define Image/Build/Initramfs
$(call Image/Build/Profile/$(IMAGE_PROFILE),initramfs)
endef
define Image/Prepare
gzip -9n -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
gzip -9n -c $(KDIR)/vmlinux-initramfs > $(KDIR)/vmlinux-initramfs.bin.gz
$(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
$(call Image/BuildLoader,generic,elf,,,-initramfs)
endif
$(call Image/BuildLoader,generic,elf)
$(call Image/Build/Profile/$(if $(CONFIG_IB),Default,$(IMAGE_PROFILE)),loader)
endef
# $(1): filesystem type.
define Image/Build
$(call Image/Build/$(call rootfs_type,$(1)),$(1))
$(call Image/Build/Profile/$(IMAGE_PROFILE),$(1))
endef
$(eval $(call BuildImage))