openwrtv4/target/linux/lantiq
John Crispin e07c4f2150 lantiq: disable buffered writes on Intel command set flash
Some Lantiq SoCs are not able to use buffered writes properly with
Intel command set flash due to the way NOR addresses on EBU are
manipulated. This patch disables buffered writes on those devices.
The only device affected at the moment is ARV4510PW, others use
AMD/Fujitsu command set.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 44451
2015-02-14 20:48:32 +00:00
..
base-files lantiq: td-w8970: fix failsafe mode 2015-02-09 12:14:48 +00:00
dts lantiq: fix DGN3500 root device 2015-02-13 07:29:17 +00:00
falcon build: unify mips target cflags 2013-09-26 17:53:14 +00:00
files/firmware/lantiq move GPHY FW blobs to non versioned folder 2013-03-14 18:42:21 +00:00
image lantiq: fix VG3503J partition table for newer kernels 2015-02-11 10:17:38 +00:00
patches-3.14 lantiq: disable buffered writes on Intel command set flash 2015-02-14 20:48:32 +00:00
patches-3.18 lantiq: disable buffered writes on Intel command set flash 2015-02-14 20:48:32 +00:00
xrx200 lantiq: PCI should be enabled on vrx200 2015-02-12 08:23:45 +00:00
xway lantiq: add 3.18 support 2015-02-09 12:13:25 +00:00
base-files.mk lantiq: add runtime generation of /etc/config/network 2011-11-15 18:21:00 +00:00
config-3.14 lantiq: update to 3.14 2014-08-18 13:09:30 +00:00
config-3.18 lantiq: make m25p80 work again 2015-02-12 11:15:56 +00:00
Makefile lantiq: add 3.18 support 2015-02-09 12:13:25 +00:00
modules.mk fix i2c-lantiq module 2012-12-16 10:03:18 +00:00