openwrtv4/package/mac80211/patches/060-no_local_ssb_bcma.patch
Hauke Mehrtens c37970cd5c mac80211: do not use CPTCFG_SSB and CPTCFG_BCMA
ssb and bcma are not build by compat-wireless / backports and the
config symbols are also not taken from there. Use the in kernel config
symbols. This fixes a build error in brcmsmac/led.c

SVN-Revision: 36973
2013-06-19 21:33:31 +00:00

129 lines
3.5 KiB
Diff

--- a/.local-symbols
+++ b/.local-symbols
@@ -365,42 +365,6 @@ USB_CDC_PHONET=
USB_IPHETH=
USB_SIERRA_NET=
USB_VL600=
-SSB_POSSIBLE=
-SSB=
-SSB_SPROM=
-SSB_BLOCKIO=
-SSB_PCIHOST_POSSIBLE=
-SSB_PCIHOST=
-SSB_B43_PCI_BRIDGE=
-SSB_PCMCIAHOST_POSSIBLE=
-SSB_PCMCIAHOST=
-SSB_SDIOHOST_POSSIBLE=
-SSB_SDIOHOST=
-SSB_SILENT=
-SSB_DEBUG=
-SSB_SERIAL=
-SSB_DRIVER_PCICORE_POSSIBLE=
-SSB_DRIVER_PCICORE=
-SSB_PCICORE_HOSTMODE=
-SSB_DRIVER_MIPS=
-SSB_SFLASH=
-SSB_EMBEDDED=
-SSB_DRIVER_EXTIF=
-SSB_DRIVER_GIGE=
-SSB_DRIVER_GPIO=
-BCMA_POSSIBLE=
-BCMA=
-BCMA_BLOCKIO=
-BCMA_HOST_PCI_POSSIBLE=
-BCMA_HOST_PCI=
-BCMA_DRIVER_PCI_HOSTMODE=
-BCMA_HOST_SOC=
-BCMA_DRIVER_MIPS=
-BCMA_SFLASH=
-BCMA_NFLASH=
-BCMA_DRIVER_GMAC_CMN=
-BCMA_DRIVER_GPIO=
-BCMA_DEBUG=
DRM=
DRM_USB=
DRM_KMS_HELPER=
--- a/Kconfig
+++ b/Kconfig
@@ -31,9 +31,6 @@ source drivers/net/wireless/Kconfig
source drivers/net/ethernet/Kconfig
source drivers/net/usb/Kconfig
-source drivers/ssb/Kconfig
-source drivers/bcma/Kconfig
-
source drivers/gpu/drm/Kconfig
source net/nfc/Kconfig
--- a/Makefile.kernel
+++ b/Makefile.kernel
@@ -26,8 +26,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
obj-$(CPTCFG_WLAN) += drivers/net/wireless/
obj-$(CPTCFG_BT) += net/bluetooth/
obj-$(CPTCFG_BT) += drivers/bluetooth/
-obj-$(CPTCFG_SSB) += drivers/ssb/
-obj-$(CPTCFG_BCMA) += drivers/bcma/
obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
obj-$(CPTCFG_DRM) += drivers/gpu/drm/
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2727,7 +2727,7 @@ static struct ssb_device *b43_ssb_gpio_d
{
struct ssb_bus *bus = dev->dev->sdev->bus;
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
#else
return bus->chipco.dev;
@@ -4733,7 +4733,7 @@ static int b43_wireless_core_init(struct
}
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
if (dev->dev->bus_type == B43_BUS_SSB &&
dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1937,7 +1937,7 @@ static int b43legacy_gpio_init(struct b4
if (dev->dev->id.revision >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
@@ -1956,7 +1956,7 @@ static void b43legacy_gpio_cleanup(struc
struct ssb_bus *bus = dev->dev->bus;
struct ssb_device *gpiodev, *pcidev = NULL;
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
--- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile
+++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile
@@ -43,6 +43,6 @@ brcmsmac-y := \
brcms_trace_events.o \
debug.o
-brcmsmac-$(CPTCFG_BCMA_DRIVER_GPIO) += led.o
+brcmsmac-$(CONFIG_BCMA_DRIVER_GPIO) += led.o
obj-$(CPTCFG_BRCMSMAC) += brcmsmac.o
--- a/drivers/net/wireless/brcm80211/brcmsmac/led.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/led.h
@@ -22,7 +22,7 @@ struct brcms_led {
bool active_low;
};
-#ifdef CPTCFG_BCMA_DRIVER_GPIO
+#ifdef CONFIG_BCMA_DRIVER_GPIO
void brcms_led_unregister(struct brcms_info *wl);
int brcms_led_register(struct brcms_info *wl);
#else