openwrtv4

No description

Find a file

Gabor Juhos 7c932579fa ar71xx: make 2.4GHz wlan LED work on the WR2543N Because ath9k does not supports separate LEDs for different bands yet, the 2.4GHz LED will show the activity, even if the 5GHz band is selected. SVN-Revision: 32615		2012-07-05 16:25:26 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	include/image.mk: /tmp should have mode 1777	2012-07-01 11:48:54 +00:00
package	hostapd: change wpa_supplicant.sh to pass 64 byte hex psk unquoted and remove the undocumented usepasspharse option, this makes it match the logic of the hostapd setup	2012-07-05 12:25:29 +00:00
scripts	scripts/feeds: redirect stderr of the which call to /dev/null to avoid potentially confusing error messages on some systems	2012-06-25 00:27:03 +00:00
target	ar71xx: make 2.4GHz wlan LED work on the WR2543N	2012-07-05 16:25:26 +00:00
toolchain	toolchain: sync eglibc headers/build split with uclibc changes	2012-07-03 14:23:32 +00:00
tools	tools: sdcc depends on bison	2012-06-29 00:32:43 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	config: tag parallel build options with high build breakage probability with a BROKEN dependency to discourage users from spamming us with tickets about them	2012-06-30 21:44:12 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	add and export HOSTCC_NOCACHE	2012-06-20 07:48:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org