openwrtv4/target/linux
Stefan Lippers-Hollmann 7c7ca66109 ipq806x: switch the NBG6817 wlan LEDs from amber to white
The original device support patch configured the amber wlan LEDs (which
are meant as error indicator by the OEM) controlled by the SOC's GPIO
as wlan traffic indicators, as the correct white wlan LEDs are
connected to GPIOs controlled by the QCA9984/ ath10k wlan cards were
not accessible. The recent addition of GPIO/ LED support to ath10k now
makes it possible to use the correct white LEDs instead - and
"mac80211: ath10k: use tpt LED trigger by default" also enables them by
default. While both LEDs are independent of each other (two separate
LEDs sharing one light tunnel), triggering both on wlan traffic is not
the intended behaviour (bright yellow light).

Tested on the ZyXEL NBG6817.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2018-06-28 18:39:57 +02:00
..
adm5120 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
adm8668 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
apm821xx kernel: bump 4.14 to 4.14.48 2018-06-05 22:54:00 +03:00
ar7 kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
ar71xx firmware-utils: tplink-safeloader: switch tl-wr1043nd-v4 to dynamic partitions 2018-06-27 08:42:54 +02:00
arc770 kernel: bump 4.14 to 4.14.51 2018-06-26 08:57:21 +02:00
archs38 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
armvirt arm64: enable harden branch predictor 2018-04-27 21:34:18 +02:00
at91 kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
ath25 ath25: drop 4.9 kernel support 2018-05-22 07:20:13 +02:00
ath79 firmware-utils: tplink-safeloader: switch tl-wr1043nd-v4 to dynamic partitions 2018-06-27 08:42:54 +02:00
au1000 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
bcm53xx bcm53xx: exit if writing kernel during sysupgrade fails 2018-06-18 13:47:08 +02:00
brcm47xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
brcm63xx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
brcm2708 brcm2708: Add wifi driver, firmware and NVRAM for Raspberry Pi 3 b 2018-06-20 21:50:14 +02:00
cns3xxx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
gemini gemini: Cook SQ201 images 2018-06-18 06:35:33 +02:00
generic kernel: bump 4.14 to 4.14.51 2018-06-26 08:57:21 +02:00
imx6 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
ipq40xx ipq40xx: add support for the ZyXEL NBG6617 2018-06-26 08:57:26 +02:00
ipq806x ipq806x: switch the NBG6817 wlan LEDs from amber to white 2018-06-28 18:39:57 +02:00
ixp4xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
kirkwood kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
lantiq lantiq: fix arcadyan vg3503j switch port indexing 2018-06-21 22:00:03 +02:00
layerscape kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
malta malta: bump tp v4.14 2018-01-09 10:26:16 +01:00
mcs814x kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
mediatek kernel: bump 4.14 to 4.14.51 2018-06-26 08:57:21 +02:00
mpc85xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
mvebu kernel: bump 4.14 to 4.14.51 2018-06-26 08:57:21 +02:00
mxs kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
octeon octeon: Add and set CPU type Octeon+ as default 2018-06-20 15:36:02 +02:00
octeontx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
omap kernel: enable EXPORTFS by default 2018-05-22 07:55:05 +02:00
omap24xx omap24xx: remove referece to not existing kmod-usb-musb-tusb6010 2018-01-15 13:13:34 +01:00
orion orion: remove linux 4.4 support 2018-04-19 14:38:57 +02:00
oxnas kernel: bump 4.14 to 4.14.48 2018-06-05 22:54:00 +03:00
pistachio kernel: bump 4.14 to 4.14.42 2018-05-22 20:49:08 +02:00
ppc40x treewide: drop target board_name functions 2017-07-15 23:13:34 +02:00
ppc44x
ramips ramips: move mt7620n i2c_pins definition to right place 2018-06-28 18:39:57 +02:00
rb532 treewide: move nand_do_upgrade call to platform_do_upgrade 2018-02-16 14:44:02 +01:00
sunxi kernel: bump 4.9 to 4.9.108 2018-06-18 07:10:19 +02:00
uml kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
x86 kernel: bump 4.9 to 4.9.106 2018-06-07 09:04:46 +02:00
xburst kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
zynq zynq: remove support for kernel 4.4 2018-06-07 09:00:49 +02:00
Makefile