No description
Find a file
Felix Fietkau 7b85e8e316 mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig
Currently port 6 is shown as up 10MBit/half in LUCI and swconfig.
Reason is that all bits in the port 6 config are zero.
This means that also the aneg flag is not set and in this case
ar8216_read_port_link hardcodes the link to be up.

This is no real problem but a little annoying.
To fix this initialize port 6 with the aneg bit enabled.
This causes ar8216_read_port_link to evaluate the link status bit which is
always zero for port 6 as no PHY is connected to this port.
And it doesn't hurt as port 6 isn't connected to anything on TL-WDR4900.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 45749
2015-05-25 21:15:37 +00:00
config build: enable package list signing by default 2015-05-05 21:16:13 +00:00
docs docs: Fix typo buysbox -> busybox. 2015-04-09 10:32:26 +00:00
include image.mk: make image too big warnings more visible 2015-05-25 08:27:55 +00:00
package netifd: bump to current HEAD 2015-05-25 21:15:31 +00:00
scripts scripts/feeds: Delete package/feeds folder in the clean procedure to prevent dangling links. 2015-05-23 15:29:06 +00:00
target mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig 2015-05-25 21:15:37 +00:00
toolchain uClibc: add signal info for seccomp related SIGSYS 2015-05-23 15:26:19 +00:00
tools tools: gengetopt: Disable doc and tests builds 2015-05-22 22:33:41 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dirclean 2015-05-23 15:28:42 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
rules.mk build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org