e2aa0c3f8b
Refreshed all patches Dropped upstreamed patches: 522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch 523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch 525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch 527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch updated patches: 524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch 030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718 Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
116 lines
3 KiB
Diff
116 lines
3 KiB
Diff
From 6d5af7093aea4f18e040e73db2ad99aaa0c0f77e Mon Sep 17 00:00:00 2001
|
|
From: Linus Walleij <linus.walleij@linaro.org>
|
|
Date: Sun, 19 Nov 2017 11:04:23 +0100
|
|
Subject: [PATCH] ARM: dts: Add ethernet to a bunch of platforms
|
|
|
|
These platforms have the PHY defined already so we just
|
|
need to add a single device node to each of them to activate
|
|
the ethernet device.
|
|
|
|
The PHY skew/delay settings for pin control is known from a
|
|
few vendor trees and old OpenWRT patch sets.
|
|
|
|
This is a modified version of upstream commit
|
|
95220046a62c00b5afb1aa7c1971989d427db977,
|
|
just dropping the NAS4220B changes.
|
|
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
---
|
|
arch/arm/boot/dts/gemini-dlink-dns-313.dts | 62 ++++++++++++++++++++++++++++++
|
|
arch/arm/boot/dts/gemini-wbd222.dts | 7 ++++
|
|
2 files changed, 69 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
|
|
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
|
|
@@ -215,6 +215,56 @@
|
|
groups = "gpio1dgrp";
|
|
};
|
|
};
|
|
+ pinctrl-gmii {
|
|
+ mux {
|
|
+ function = "gmii";
|
|
+ groups = "gmii_gmac0_grp";
|
|
+ };
|
|
+ /*
|
|
+ * In the vendor Linux tree, these values are set for the C3
|
|
+ * version of the SL3512 ASIC with the comment "benson suggest"
|
|
+ */
|
|
+ conf0 {
|
|
+ pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
|
|
+ skew-delay = <0>;
|
|
+ };
|
|
+ conf1 {
|
|
+ pins = "T8 GMAC0 RXC";
|
|
+ skew-delay = <10>;
|
|
+ };
|
|
+ conf2 {
|
|
+ pins = "T11 GMAC1 RXC";
|
|
+ skew-delay = <15>;
|
|
+ };
|
|
+ conf3 {
|
|
+ pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
|
|
+ skew-delay = <7>;
|
|
+ };
|
|
+ conf4 {
|
|
+ pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
|
|
+ skew-delay = <10>;
|
|
+ };
|
|
+ conf5 {
|
|
+ /* The data lines all have default skew */
|
|
+ pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
|
|
+ "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
|
|
+ "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
|
|
+ "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
|
|
+ "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
|
|
+ "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
|
|
+ skew-delay = <7>;
|
|
+ };
|
|
+ conf6 {
|
|
+ pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
|
|
+ "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
|
|
+ skew-delay = <5>;
|
|
+ };
|
|
+ /* Set up drive strength on GMAC0 to 16 mA */
|
|
+ conf7 {
|
|
+ groups = "gmii_gmac0_grp";
|
|
+ drive-strength = <16>;
|
|
+ };
|
|
+ };
|
|
};
|
|
};
|
|
|
|
@@ -235,6 +285,18 @@
|
|
pinctrl-0 = <&gpio1_default_pins>;
|
|
};
|
|
|
|
+ ethernet@60000000 {
|
|
+ status = "okay";
|
|
+
|
|
+ ethernet-port@0 {
|
|
+ phy-mode = "rgmii";
|
|
+ phy-handle = <&phy0>;
|
|
+ };
|
|
+ ethernet-port@1 {
|
|
+ /* Not used in this platform */
|
|
+ };
|
|
+ };
|
|
+
|
|
ata@63000000 {
|
|
status = "okay";
|
|
};
|
|
--- a/arch/arm/boot/dts/gemini-wbd222.dts
|
|
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
|
|
@@ -136,6 +136,13 @@
|
|
"gpio0bgrp";
|
|
};
|
|
};
|
|
+ pinctrl-gmii {
|
|
+ /* This platform use both the ethernet ports */
|
|
+ mux {
|
|
+ function = "gmii";
|
|
+ groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
|
|
+ };
|
|
+ };
|
|
};
|
|
};
|
|
|