KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ramips/image/Makefile
John Crispin 48feea4861 Add Netgear WNCE2001 (OF version) 
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
2013-04-09 14:19:33 +00:00

522 lines
20 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2008-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define imgname
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
endef
define sysupname
$(call imgname,$(1),$(2))-sysupgrade.bin
endef
VMLINUX:=$(IMG_PREFIX)-vmlinux
UIMAGE:=$(IMG_PREFIX)-uImage
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
define Image/Build/Initramfs
$(call Image/Build/Profile/$(PROFILE),initramfs)
endef
endif
ifeq ($(CONFIG_SOC_RT288X),y)
define kernel_entry
-a 0x88000000 -e 0x88000000
endef
else
define kernel_entry
-a 0x80000000 -e 0x80000000
endef
endif
define MkCombineduImage
$(call PatchKernelLzma,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt `expr $(4) - 64` ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big" >&2; \
else if [ `stat -c%s "$(KDIR)/root.$(1)"` -gt $(5) ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big" >&2; \
else \
( dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=`expr $(4) - 64` conv=sync ; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/vmlinux-$(2).bin.lzma.combined ; \
fi ; fi
$(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.combined,$(call sysupname,$(1),$(2)),$(6))
endef
#
# The real magic happens inside these templates
#
define MkImage
$(eval imagename=$(if $(4),$(4),MIPS OpenWrt Linux-$(LINUX_VERSION)))
-mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
-n "$(imagename)" \
-d $(2) $(3)
endef
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
endef
define MkImageSysupgrade/squashfs
$(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin)
cat $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) > $(KDIR)/$(output_name)
$(call prepare_generic_squashfs,$(KDIR)/$(output_name))
if [ `stat -c%s "$(KDIR)/$(output_name)"` -gt $(3) ]; then \
echo "Warning: $(KDIR)/$(output_name) is too big" >&2; \
else \
$(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name); \
fi
endef
define PatchKernelLzmaDtb
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
$(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(2).dtb ../dts/$(2).dts
$(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1) $(KDIR)/$(2).dtb
$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
endef
define MkImageLzmaDtb
$(call PatchKernelLzmaDtb,$(1),$(2))
$(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage,$(3))
endef
define BuildFirmware/OF
$(call MkImageLzmaDtb,$(2),$(3),$(5))
$(call MkImageSysupgrade/$(1),$(1),$(2),$(4),$(6))
endef
define BuildFirmware/OF/initramfs
$(call MkImageLzmaDtb,$(2),$(3))
$(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin
endef
# Build images for default ralink layout for 4MB flash
# kernel + roots = 0x3b0000
# $(1) = squashfs/initramfs
# $(2) = lowercase board name
# $(3) = dts file
ralink_default_fw_size_4M=3866624
BuildFirmware/Default4M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_4M))
BuildFirmware/Default4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# Build images for default ralink layout for 8MB flash
# kernel + roots = 0x7b0000
# $(1) = squashfs/initramfs
# $(2) = lowercase board name
# $(3) = dts file
ralink_default_fw_size_8M=8060928
BuildFirmware/Default8M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M))
BuildFirmware/Default8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# Build images for a custom sized flash layout
# $(1) = squashfs/initramfs
# $(2) = lowercase board name
# $(3) = dts file
# $(4) = kernel + rootfs size
BuildFirmware/CustomFlash/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(4),$(5),$(6))
BuildFirmware/CustomFlash/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# wrappers for boards that have 4MB and 8MB versions
define BuildFirmware/DefaultDualSize/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),$(2)-4M,$(3)-4M)
$(call BuildFirmware/Default8M/$(1),$(1),$(2)-8M,$(3)-8M)
endef
define BuildFirmware/DefaultDualSize/initramfs
$(call BuildFirmware/OF/initramfs,$(1),$(2)-4M,$(3)-4M)
$(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
endef
# Some boards need a special header inside the uImage to make them bootable
define BuildFirmware/CustomFlashFactory/squashfs
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4))
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4),$(5),$(6))
endef
BuildFirmware/CustomFlashFactory/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# sign an image to make it work with edimax tftp recovery
define BuildFirmware/Edimax/squashfs
$(call BuildFirmware/OF,$(1),$(2),$(3),$(4))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
mkedimaximg -i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin \
-s $(5) -m $(6) -f $(7) -S $(8); \
fi
endef
BuildFirmware/Edimax/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# build Seama header images
define BuildFirmware/Seama/squashfs
$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M))
cat $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/root.$(1) > $(KDIR)/img_$(2).$(1).tmp
if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt 8060864 ]; then \
echo "Warning: $(KDIR)/img_$(2).$(1).tmp is too big" >&2; \
else \
dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=64k conv=sync; \
( \
dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64`; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
) > $(KDIR)/vmlinux-$(2).tmp; \
$(STAGING_DIR_HOST)/bin/seama \
-i $(KDIR)/vmlinux-$(2).tmp \
-m "dev=/dev/mtdblock/2" -m "type=firmware"; \
$(STAGING_DIR_HOST)/bin/seama \
-s $(call imgname,$(1),$(2))-factory.bin \
-m "signature=$(4)" \
-i $(KDIR)/vmlinux-$(2).tmp.seama; \
fi
endef
BuildFirmware/Seama/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# sign Buffalo images
define BuildFirmware/Buffalo
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
buffalo-enc -p $(3) -v 1.76 \
-i $(KDIR)/vmlinux-$(2).uImage \
-o $(KDIR)/vmlinux-$(2).uImage.enc; \
buffalo-enc -p $(3) -v 1.76 \
-i $(KDIR)/root.$(1) \
-o $(KDIR)/root.$(2).enc; \
buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
-l mlang8 -f 1 -r EU \
-i $(KDIR)/vmlinux-$(2).uImage.enc \
-i $(KDIR)/root.$(2).enc \
-o $(call imgname,$(1),$(2))-factory-EU.bin; \
fi
endef
# sign trednet / UMedia images
define BuildFirmware/UMedia/squashfs
$(call BuildFirmware/Default8M/$(1),$(1),$(2),$(3))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
fix-u-media-header -T 0x46 -B $(4) \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin; \
fi
endef
BuildFirmware/UMedia/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# sign dap 1350 based images
dap1350_mtd_size=7667712
define BuildFirmware/dap1350/squashfs
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(dap1350_mtd_size))
-mkdapimg -s $(4) \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin
endef
BuildFirmware/dap1350/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
#
# RT288X Profiles
#
# 0x790000
belkin_f5d8235v1_mtd_size=7929856
Image/Build/Profile/F5D8235V1=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v1,F5D8235_V1,$(belkin_f5d8235v1_mtd_size))
Image/Build/Profile/BR6524N=$(call BuildFirmware/Edimax/$(1),$(1),br6524n,BR6524N,$(ralink_default_fw_size_4M),CSYS,WNRA,0x50000,0xc0000)
Image/Build/Profile/RTN15=$(call BuildFirmware/Default4M/$(1),$(1),rt-n15,RTN15)
Image/Build/Profile/V11STFE=$(call BuildFirmware/Default4M/$(1),$(1),v11st-fe,V11STFE)
Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx4-ag300n,WLI-TX4-AG300N)
ifeq ($(SUBTARGET),rt288x)
define Image/Build/Profile/Default
$(call Image/Build/Profile/F5D8235V1,$(1))
$(call Image/Build/Profile/BR6524N,$(1))
$(call Image/Build/Profile/RTN15,$(1))
$(call Image/Build/Profile/V11STFE,$(1))
$(call Image/Build/Profile/WLITX4AG300N,$(1))
endef
endif
#
# RT305X Profiles
#
edimax_3g6200n_mtd_size=3735552
Image/Build/Profile/3G6200N=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
Image/Build/Profile/3G6200NL=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200nl,3G-6200NL,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
Image/Build/Profile/3G300M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI Kernel Image,factory)
Image/Build/Profile/AIR3GII=$(call BuildFirmware/Default4M/$(1),$(1),air3gii,AIR3GII)
define BuildFirmware/UIMAGE_8M
$(call MkCombineduImage,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7))
endef
define Image/Build/Profile/ALL02393G
$(call Image/Build/Template/$(image_type)/$(1),UIMAGE_8M,all0239-3g,ALL0239-3G,ttyS1,57600,phys)
endef
Image/Build/Profile/ALL0256N=$(call BuildFirmware/DefaultDualSize/$(1),$(1),all0256n,ALL0256N)
allnet_all5002_mtd_size=33226752
Image/Build/Profile/ALL5002=$(call BuildFirmware/CustomFlash/$(1),$(1),all5002,ALL5002,$(allnet_all5002_mtd_size))
argus_atp52b_mtd_size=7995392
Image/Build/Profile/ARGUS_ATP52B=$(call BuildFirmware/CustomFlash/$(1),$(1),argus_atp52b,ARGUS_ATP52B,$(argus_atp52b_mtd_size))
Image/Build/Profile/BC2=$(call BuildFirmware/Default8M/$(1),$(1),bc2,BC2)
broadway_mtd_size=7929856
Image/Build/Profile/BROADWAY=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),broadway,BROADWAY,$(broadway_mtd_size),Broadway Kernel Image,factory)
Image/Build/Profile/CARAMBOLA=$(call BuildFirmware/Default8M/$(1),$(1),carambola,CARAMBOLA)
Image/Build/Profile/D105=$(call BuildFirmware/Default4M/$(1),$(1),d105,D105)
define BuildFirmware/DIR300B1/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
-mkwrgimg -s $(4) -d /dev/mtdblock/2 \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin
endef
BuildFirmware/DIR300B1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
Image/Build/Profile/DIR-300-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
Image/Build/Profile/DIR-600-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
Image/Build/Profile/DIR-600-B2=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
Image/Build/Profile/DIR-615-D=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
Image/Build/Profile/DIR-620-A1=$(call BuildFirmware/Default8M/$(1),$(1),dir-620-a1,DIR-620-A1)
define BuildFirmware/DIR615H1/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),dir-615-h1,DIR-615-H1)
-mkdir615h1 -e $(call sysupname,$(1),dir-615-h1) \
-o $(call imgname,$(1),dir-615-h1)-factory.bin
endef
BuildFirmware/DIR615H1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),dir-615-h1,DIR-615-H1)
Image/Build/Profile/DIR615H1=$(call BuildFirmware/DIR615H1/$(1),$(1))
Image/Build/Profile/DAP1350=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350,DAP-1350,RT3052-AP-DAP1350-3)
Image/Build/Profile/DAP1350WW=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350WW,DAP-1350,RT3052-AP-DAP1350WW-3)
Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753)
Image/Build/Profile/HW550-3G=$(call BuildFirmware/Default8M/$(1),$(1),hw550-3g,HW550-3G)
belkin_f5d8235v2_mtd_size=7929856
Image/Build/Profile/F5D8235V2=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v2,F5D8235_V2,$(belkin_f5d8235v2_mtd_size))
Image/Build/Profile/FONERA20N=$(call BuildFirmware/Edimax/$(1),$(1),fonera20n,FONERA20N,$(ralink_default_fw_size_8M),RSDK,NL1T,0x50000,0xc0000)
Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT-N13U)
Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5)
Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N)
Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
nw718_mtd_size=3801088
Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB)
Image/Build/Profile/PSR-680W=$(call BuildFirmware/Default4M/$(1),$(1),psr-680w,PSR-680W)
Image/Build/Profile/PWH2004=$(call BuildFirmware/Default8M/$(1),$(1),pwh2004,PWH2004)
Image/Build/Profile/RTG32B1=$(call BuildFirmware/Default4M/$(1),$(1),rt-g32-b1,RT-G32-B1)
Image/Build/Profile/RTN10PLUS=$(call BuildFirmware/Default4M/$(1),$(1),rt-n10-plus,RT-N10-PLUS)
Image/Build/Profile/SL-R7205=$(call BuildFirmware/Default4M/$(1),$(1),sl-r7205,SL-R7205)
Image/Build/Profile/V22RW-2X2=$(call BuildFirmware/Default4M/$(1),$(1),v22rw-2x2,V22RW-2X2)
Image/Build/Profile/W150M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w150m,W150M,$(ralink_default_fw_size_4M),W150M Kernel Image,factory)
Image/Build/Profile/W306R_V20=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w306r-v20,W306R_V20,$(ralink_default_fw_size_4M),linkn Kernel Image,factory)
Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U)
Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN)
buffalo_whrg300n_mtd_size=3801088
define BuildFirmware/WHRG300N/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),whr-g300n,WHR-G300N)
# the following line has a bad argument 3 ... the old Makefile was already broken
$(call BuildFirmware/Buffalo,$(1),whr-g300n,whr-g300n)
( \
echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
dd bs=512 count=1 conv=sync; \
dd if=$(call sysupname,$(1),whr-g300n); \
) > $(KDIR)/whr-g300n-tftp.tmp
buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
-o $(call imgname,$(1),whr-g300n)-tftp.bin
endef
BuildFirmware/WHRG300N/initramfs=$(call BuildFirmware/OF/initramfs,$(1),whr-g300n,WHR-G300N)
Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1))
Image/Build/Profile/WL_330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL_330N)
Image/Build/Profile/WL_330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL_330N3G)
kernel_size_wl341v3=917504
rootfs_size_wl341v3=2949120
define BuildFirmware/WL341V3/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),wl341v3,WL341V3)
# This code looks broken and really needs to be converted to C
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
dd if=/dev/zero bs=195936 count=1; \
echo "1.01"; \
dd if=/dev/zero bs=581 count=1; \
echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
dd if=/dev/zero bs=65552 count=1; \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
) > $(call imgname,$(1),$(2))-factory.bin; \
fi
endef
BuildFirmware/WL341V3/initramfs=$(call BuildFirmware/OF/initramfs,$(1),wl341v3,WL341V3)
Image/Build/Profile/WL341V3=$(call BuildFirmware/WL341V3/$(1),$(1))
Image/Build/Profile/WL-351=$(call BuildFirmware/Default4M/$(1),$(1),wl-351,WL-351)
define BuildFirmware/WNCE2001/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
-mkdapimg -s RT3052-AP-WNCE2001-3 -r WW -v 1.0.0.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory-worldwide.bin
-mkdapimg -s RT3052-AP-WNCE2001-3 -r NA -v 1.0.0.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory-northamerica.bin
endef
BuildFirmware/WNCE2001/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
Image/Build/Profile/WNCE2001=$(call BuildFirmware/WNCE2001/$(1),$(1),wnce2001,WNCE2001)
Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN)
Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G)
Image/Build/Profile/UR-336UN=$(call BuildFirmware/Default8M/$(1),$(1),ur-336un,UR-336UN)
Image/Build/Profile/WR6202=$(call BuildFirmware/Default8M/$(1),$(1),wr6202,WR6202)
Image/Build/Profile/XDXRN502J=$(call BuildFirmware/Default4M/$(1),$(1),xdxrn502j,XDXRN502J)
ifeq ($(SUBTARGET),rt305x)
define Image/Build/Profile/Default
$(call Image/Build/Profile/3G6200N,$(1))
$(call Image/Build/Profile/3G6200NL,$(1))
$(call Image/Build/Profile/3G300M,$(1))
$(call Image/Build/Profile/AIR3GII,$(1))
$(call Image/Build/Profile/ALL02393G,$(1))
$(call Image/Build/Profile/ALL0256N,$(1))
$(call Image/Build/Profile/ALL5002,$(1))
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/BC2,$(1))
$(call Image/Build/Profile/BROADWAY,$(1))
$(call Image/Build/Profile/CARAMBOLA,$(1))
$(call Image/Build/Profile/D105,$(1))
$(call Image/Build/Profile/DIR-300-B1,$(1))
$(call Image/Build/Profile/DIR-600-B1,$(1))
$(call Image/Build/Profile/DIR-600-B2,$(1))
$(call Image/Build/Profile/DIR-615-D,$(1))
$(call Image/Build/Profile/DIR-620-A1,$(1))
$(call Image/Build/Profile/DIR615H1,$(1))
$(call Image/Build/Profile/DAP1350,$(1))
$(call Image/Build/Profile/DAP1350WW,$(1))
$(call Image/Build/Profile/ESR-9753,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/FREESTATION5,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1))
$(call Image/Build/Profile/NBG-419N,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/OMNI-EMB,$(1))
$(call Image/Build/Profile/PSR-680W,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/RTN10PLUS,$(1))
$(call Image/Build/Profile/RT-N13U,$(1))
$(call Image/Build/Profile/SL-R7205,$(1))
$(call Image/Build/Profile/UR-326N4G,$(1))
$(call Image/Build/Profile/V22RW-2X2,$(1))
$(call Image/Build/Profile/W150M,$(1))
$(call Image/Build/Profile/W306R_V20,$(1))
$(call Image/Build/Profile/W502U,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WL_330N,$(1))
$(call Image/Build/Profile/WL_330N3G,$(1))
$(call Image/Build/Profile/WL341V3,$(1))
$(call Image/Build/Profile/WL-351,$(1))
$(call Image/Build/Profile/WNCE2001,$(1))
$(call Image/Build/Profile/WR512-3GN,$(1))
$(call Image/Build/Profile/WR6202,$(1))
$(call Image/Build/Profile/XDXRN502J,$(1))
endef
endif
#
# RT3662/RT3883 Profiles
#
Image/Build/Profile/DIR645=$(call BuildFirmware/Seama/$(1),$(1),dir-645,DIR-645,wrgn39_dlob.hans_dir645)
omniembhpm_mtd_size=16449536
Image/Build/Profile/OMNIEMBHPM=$(call BuildFirmware/CustomFlash/$(1),$(1),omni-emb-hpm,OMNI-EMB-HPM,$(omniembhpm_mtd_size))
Image/Build/Profile/RTN56U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RTN56U)
Image/Build/Profile/TEW691GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-691gr,TEW-691GR,0x026910)
#Image/Build/Profile/TEW692GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-692gr,TEW-692GR,0x026920)
ifeq ($(SUBTARGET),rt3883)
define Image/Build/Profile/Default
$(call Image/Build/Profile/DIR645,$(1))
$(call Image/Build/Profile/OMNIEMBHPM,$(1))
$(call Image/Build/Profile/RTN56U,$(1))
$(call Image/Build/Profile/TEW691GR,$(1))
$(call Image/Build/Profile/TEW692GR,$(1))
endef
endif
#
# Generic Targets
#
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
endef
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
$(call Image/Build/Initramfs)
endef
define Image/Build
$(call Image/Build/$(1))
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
$(call Image/Build/Profile/$(PROFILE),$(1))
endef
$(eval $(call BuildImage))
Reference in a new issue View git blame Copy permalink