openwrtv4/target/linux/brcm63xx/dts/rg100a.dts
Jonas Gorski a89f5e795a brcm63xx: move the bootargs into the dtb files
Instead of using a fixed commandline, allow one per device.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:22 +02:00

58 lines
939 B
Text

/dts-v1/;
#include "bcm6358.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Alcatel RG100A";
compatible = "alcatel,rg100a", "brcm,bcm6358";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
stop_green {
label = "96358VW2:green:stop";
gpios = <&gpio0 4 1>;
};
power_green {
label = "96358VW2:green:power";
gpios = <&gpio0 5 1>;
default-state = "on";
};
adsl_green {
label = "96358VW2:green:adsl";
gpios = <&gpio0 22 1>;
};
ppp_fail_green {
label = "96358VW2:green:ppp-fail";
gpios = <&gpio0 23 0>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
linux@20000 {
label = "linux";
reg = <0x020000 0xfc0000>;
};
nvram@fe0000 {
label = "nvram";
reg = <0xfe0000 0x020000>;
};
};