79440ea756
The ZBT WE1026-5G (http://www.zbtlink.com/products/router/WE1026-5G.html) is the follow-up to the ZBT WE1026 and is based on MT7620. For the previous WE1026, the ZBT WE826 image could be used. However, as the name implies, the -5G comes equipped with a 5GHz wifi radio. As the WE826 only has a 2.4GHz radio, the addition of 5GHz means that a separate image is needed for the WE1026-5G. I suspect that this image will also work on the previous WE1026, but I don't have a device to test with. The WE1026-5G has following specifications: * CPU: MT7620A * 1x 10/100Mbps Ethernet. * 16 MB Flash. * 64 MB RAM. * 1x USB 2.0 port. * 1x mini-PCIe slots. * 1x SIM slots. * 1x 2.4Ghz WIFI. * 1x 5GHz wifi (MT7612) * 1x button. * 3x controllable LEDs. Works: * Wifi. * Switch. * mini-PCIe slot. Only tested with a USB device (a modem). * SIM slot. * Sysupgrade. * Button (reset). Not working: * The 5GHz WIFI LED is completely dead. I suspect the issue is the same as on other devices with Mediatek 5Ghz wifi-cards/chips. The LED is controlled by the driver, and mt76 (currently) does not support this. Not tested: * SD card reader. Notes: * The modem (labeled 3G/4G) and power LEDs are controlled by the hardware. * There is a 32MB version of this device available, but I do not have access to it. I have therefor only added support for the 16MB version, but added all the required infrastructure to make adding support for the 32MB version easy. Installation: The router comes pre-installed with OpenWRT, including a variant of Luci. The initial firmware install can be done through this UI, following normal procedure. I.e., access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. Recovery: If you brick the device, the WE1026-5G supports recovery using HTTP. Keep the reset button pressed for ~5sec when booting to start the web server. Set the address of the network interface on your machine to 192.168.1.2/24, and point your browser to 192.168.1.1 to access the recovery UI. From the recovery UI you can upload a firmware image. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
527 lines
9.9 KiB
Bash
Executable file
527 lines
9.9 KiB
Bash
Executable file
#!/bin/sh
|
|
|
|
. /lib/functions.sh
|
|
. /lib/functions/uci-defaults.sh
|
|
. /lib/functions/system.sh
|
|
|
|
ramips_setup_rt3x5x_vlans()
|
|
{
|
|
if [ ! -x /sbin/swconfig ]; then
|
|
# legacy default
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
return
|
|
fi
|
|
local wanports=""
|
|
local lanports=""
|
|
for port in 5 4 3 2 1 0; do
|
|
if [ `swconfig dev rt305x port $port get disable` = "1" ]; then
|
|
continue
|
|
fi
|
|
if [ `swconfig dev rt305x port $port get lan` = "0" ]; then
|
|
wanports="$port:wan $wanports"
|
|
else
|
|
lanports="$port:lan $lanports"
|
|
fi
|
|
done
|
|
ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0"
|
|
}
|
|
|
|
ramips_setup_interfaces()
|
|
{
|
|
local board="$1"
|
|
|
|
case $board in
|
|
11acnas|\
|
|
w2914nsv2|\
|
|
zbt-we2026)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
|
|
;;
|
|
3g150b|\
|
|
3g300m|\
|
|
a5-v11|\
|
|
all0256n-4M|\
|
|
all0256n-8M|\
|
|
all5002|\
|
|
all5003|\
|
|
broadway|\
|
|
dcs-930|\
|
|
dcs-930l-b1|\
|
|
ht-tm02|\
|
|
linkits7688 | \
|
|
linkits7688d | \
|
|
m2m|\
|
|
microwrt|\
|
|
mpr-a2|\
|
|
ncs601w|\
|
|
omega2 | \
|
|
omega2p | \
|
|
timecloud|\
|
|
w150m|\
|
|
widora-neo|\
|
|
wnce2001|\
|
|
zbt-cpe102|\
|
|
zte-q7)
|
|
ucidef_add_switch "switch0"
|
|
ucidef_add_switch_attr "switch0" "enable" "false"
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
mlw221|\
|
|
mr-102n)
|
|
ucidef_set_interface_lan "eth0.2"
|
|
;;
|
|
3g-6200n|\
|
|
ai-br100|\
|
|
d240|\
|
|
db-wrt01|\
|
|
dir-300-b7|\
|
|
dir-320-b1|\
|
|
dir-610-a1|\
|
|
dir-615-h1|\
|
|
ew1200|\
|
|
firewrt|\
|
|
hc5661a|\
|
|
hc5962|\
|
|
hlk-rm04|\
|
|
k2p|\
|
|
kn|\
|
|
kn_rc|\
|
|
mac1200rv2|\
|
|
miwifi-mini|\
|
|
miwifi-nano|\
|
|
mt7621|\
|
|
mt7628|\
|
|
mzk-750dhp|\
|
|
mzk-w300nh2|\
|
|
nixcore-x1-8M|\
|
|
nixcore-x1-16M|\
|
|
oy-0001|\
|
|
pbr-m1|\
|
|
psg1208|\
|
|
psg1218a|\
|
|
r6220|\
|
|
sap-g3200u3|\
|
|
sk-wb8|\
|
|
vr500|\
|
|
wf-2881|\
|
|
witi|\
|
|
wl-wn575a3|\
|
|
wndr3700v5|\
|
|
wt1520-4M|\
|
|
wt1520-8M|\
|
|
y1|\
|
|
youku-yk1|\
|
|
zbt-ape522ii|\
|
|
zbt-we1326|\
|
|
zbt-we826-16M|\
|
|
zbt-we826-32M|\
|
|
zbt-wg2626|\
|
|
zbt-wg3526-16M|\
|
|
zbt-wg3526-32M|\
|
|
zbt-wr8305rt)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
|
|
;;
|
|
mir3g)
|
|
ucidef_add_switch "switch0" \
|
|
"1:wan" "2:lan:2" "3:lan:1" "6@eth0"
|
|
;;
|
|
psg1218b)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
|
|
;;
|
|
whr-300hp2|\
|
|
whr-600d|\
|
|
wsr-1166|\
|
|
wsr-600)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0"
|
|
;;
|
|
ar670w|\
|
|
ar725w|\
|
|
rt-ac51u)
|
|
ucidef_add_switch "switch0" \
|
|
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
|
|
;;
|
|
rt-n15|\
|
|
wl-351)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
|
|
;;
|
|
asl26555-8M|\
|
|
asl26555-16M|\
|
|
rp-n53)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
|
|
;;
|
|
atp-52b|\
|
|
awm002-evb-4M|\
|
|
awm002-evb-8M|\
|
|
c20i|\
|
|
dir-645|\
|
|
f5d8235-v2|\
|
|
gl-mt300a|\
|
|
gl-mt300n|\
|
|
gl-mt750|\
|
|
hg255d|\
|
|
jhr-n805r|\
|
|
jhr-n825r|\
|
|
jhr-n926r|\
|
|
mzk-wdpr|\
|
|
rb750gr3|\
|
|
rt-n14u|\
|
|
tl-wr840n-v4|\
|
|
tl-wr841n-v13|\
|
|
ubnt-erx|\
|
|
ubnt-erx-sfp|\
|
|
ur-326n4g|\
|
|
wrtnode|\
|
|
wrtnode2p | \
|
|
wrtnode2r | \
|
|
wt3020-4M|\
|
|
wt3020-8M|\
|
|
zbt-wa05)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
|
|
;;
|
|
c50)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
|
|
;;
|
|
dir-860l-b1)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
|
|
;;
|
|
gb-pc1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "4:lan" "6@eth0"
|
|
;;
|
|
gl-mt300n-v2)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "0:wan" "6@eth0"
|
|
;;
|
|
awapn2403)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:wan" "6@eth0"
|
|
;;
|
|
b2c|\
|
|
nw718|\
|
|
psr-680w|\
|
|
sl-r7205|\
|
|
ur-336un|\
|
|
w502u|\
|
|
wr6202)
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
;;
|
|
br-6475nd)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
|
|
;;
|
|
c108|\
|
|
cf-wr800n)
|
|
ucidef_add_switch "switch0" \
|
|
"4:lan" "6t@eth0"
|
|
;;
|
|
cy-swr1100)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
|
|
;;
|
|
cs-qr10|\
|
|
d105|\
|
|
dch-m225|\
|
|
ex2700|\
|
|
ex3700|\
|
|
hpm|\
|
|
mzk-ex300np|\
|
|
mzk-ex750np|\
|
|
na930|\
|
|
pbr-d1|\
|
|
wli-tx4-ag300n|\
|
|
wmdr-143n|\
|
|
wmr-300|\
|
|
wn3000rpv3|\
|
|
wrh-300cr)
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
duzun-dm06)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "0:wan" "6@eth0"
|
|
;;
|
|
e1700|\
|
|
mt7620a_mt7530)
|
|
ucidef_add_switch "switch1" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
|
|
;;
|
|
hc5*61|\
|
|
y1s)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
|
|
;;
|
|
kn_rf)
|
|
ucidef_add_switch "switch0" \
|
|
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
|
|
;;
|
|
kng_rc)
|
|
ucidef_add_switch "switch1" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
|
|
;;
|
|
mlwg2|\
|
|
wizard8800|\
|
|
wl-330n)
|
|
ucidef_set_interface_lan "eth0.1"
|
|
;;
|
|
mr200)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
|
|
ucidef_set_interface_wan "usb0"
|
|
;;
|
|
mzk-dp150n|\
|
|
vocore-8M|\
|
|
vocore-16M)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "4:lan" "6t@eth0"
|
|
;;
|
|
newifi-d1)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:2" "2:lan:1" "4:wan" "6@eth0"
|
|
;;
|
|
re350-v1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "6@eth0"
|
|
;;
|
|
re6500)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
|
|
;;
|
|
rt-n56u)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
|
|
;;
|
|
tew-638apb-v2)
|
|
ucidef_add_switch "switch0" \
|
|
"4:lan" "6@eth0"
|
|
;;
|
|
tew-691gr|\
|
|
tew-692gr|\
|
|
wlr-6000)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
|
|
;;
|
|
vocore2|\
|
|
vocore2lite)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "2:lan" "6t@eth0"
|
|
;;
|
|
f5d8235-v1|\
|
|
tew-714tru|\
|
|
v11st-fe|\
|
|
wzr-agl300nh)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
|
|
;;
|
|
wcr-1166ds)
|
|
ucidef_add_switch "switch0" \
|
|
"3:lan" "4:wan" "6@eth0"
|
|
;;
|
|
wcr-150gn|\
|
|
we1026-5g-16m)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "6t@eth0"
|
|
;;
|
|
whr-1166d)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0"
|
|
;;
|
|
wizfi630a)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "0:wan" "6@eth0"
|
|
;;
|
|
*)
|
|
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
|
|
if [ -n "${RT3X5X}" ]; then
|
|
ramips_setup_rt3x5x_vlans
|
|
else
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
fi
|
|
;;
|
|
esac
|
|
}
|
|
|
|
ramips_setup_macs()
|
|
{
|
|
local board="$1"
|
|
local lan_mac=""
|
|
local wan_mac=""
|
|
|
|
case $board in
|
|
a5-v11|\
|
|
ht-tm02|\
|
|
wmdr-143n)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
;;
|
|
all0239-3g|\
|
|
carambola|\
|
|
freestation5|\
|
|
w502u|\
|
|
wnce2001)
|
|
wan_mac=$(mtd_get_mac_binary factory 46)
|
|
;;
|
|
bc2|\
|
|
broadway|\
|
|
d105|\
|
|
dir-300-b7|\
|
|
dir-320-b1|\
|
|
dir-620-a1|\
|
|
esr-9753|\
|
|
freestation5|\
|
|
hlk-rm04|\
|
|
mpr-a1|\
|
|
psr-680w|\
|
|
sl-r7205|\
|
|
y1|\
|
|
y1s)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_setbit_la "$lan_mac")
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
;;
|
|
br-6475nd)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
wan_mac=$(mtd_get_mac_binary devdata 7)
|
|
;;
|
|
cy-swr1100|\
|
|
dch-m225)
|
|
lan_mac=$(mtd_get_mac_ascii factory lanmac)
|
|
;;
|
|
dir-645)
|
|
lan_mac=$(mtd_get_mac_ascii nvram lanmac)
|
|
wan_mac=$(mtd_get_mac_ascii nvram wanmac)
|
|
;;
|
|
dir-860l-b1)
|
|
lan_mac=$(mtd_get_mac_ascii factory lanmac)
|
|
wan_mac=$(mtd_get_mac_ascii factory wanmac)
|
|
;;
|
|
e1700)
|
|
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
|
|
;;
|
|
gl-mt300n-v2)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
;;
|
|
hc5*61|\
|
|
hc5661a|\
|
|
hc5962)
|
|
lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
|
|
[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
;;
|
|
kn_rc|\
|
|
kn_rf|\
|
|
kng_rc)
|
|
wan_mac=$(mtd_get_mac_binary factory 40)
|
|
;;
|
|
linkits7688 | \
|
|
linkits7688d)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
lan_mac=$(mtd_get_mac_binary factory 46)
|
|
;;
|
|
mac1200rv2)
|
|
lan_mac=$(mtd_get_mac_binary factory_info 13)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
;;
|
|
mir3g)
|
|
lan_mac=$(mtd_get_mac_binary Factory e006)
|
|
;;
|
|
miwifi-mini)
|
|
wan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_setbit_la "$wan_mac")
|
|
;;
|
|
m3|\
|
|
m4-4M|\
|
|
m4-8M|\
|
|
x5|\
|
|
x8)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_add "$lan_mac" -2)
|
|
;;
|
|
newifi-d1)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_add "$lan_mac" 2)
|
|
;;
|
|
omega2|\
|
|
omega2p)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
lan_mac=$(mtd_get_mac_binary factory 46)
|
|
;;
|
|
oy-0001)
|
|
lan_mac=$(mtd_get_mac_binary factory 40)
|
|
wan_mac=$(mtd_get_mac_binary factory 46)
|
|
;;
|
|
r6220)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
lan_mac=$(macaddr_add "$wan_mac" 1)
|
|
;;
|
|
rt-n56u)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
lan_mac=$(macaddr_setbit_la "$lan_mac")
|
|
wan_mac=$(mtd_get_mac_binary factory 32772)
|
|
;;
|
|
sk-wb8)
|
|
wan_mac=$(mtd_get_mac_binary factory 57350)
|
|
;;
|
|
tew-691gr)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
|
|
;;
|
|
tew-692gr)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1)
|
|
;;
|
|
tiny-ac)
|
|
lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
|
|
wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
|
|
;;
|
|
vr500)
|
|
lan_mac=$(mtd_get_mac_binary factory 57344)
|
|
wan_mac=$(mtd_get_mac_binary factory 57350)
|
|
;;
|
|
w306r-v20)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
wan_mac=$(macaddr_add "$lan_mac" 5)
|
|
;;
|
|
wcr-1166ds|\
|
|
wsr-1166)
|
|
local index="$(find_mtd_index "board_data")"
|
|
wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
|
|
lan_mac=$wan_mac
|
|
;;
|
|
wcr-150gn)
|
|
wan_mac=$(mtd_get_mac_binary factory 40)
|
|
;;
|
|
whr-1166d|\
|
|
whr-300hp2|\
|
|
whr-600d|\
|
|
wsr-600)
|
|
wan_mac=$(mtd_get_mac_binary factory 4)
|
|
lan_mac=$wan_mac
|
|
;;
|
|
wizfi630a)
|
|
lan_mac=$(mtd_get_mac_binary factory 4)
|
|
wan_mac=$(mtd_get_mac_binary factory 40)
|
|
;;
|
|
wlr-6000)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
|
|
;;
|
|
*)
|
|
lan_mac=$(cat /sys/class/net/eth0/address)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
;;
|
|
esac
|
|
|
|
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
|
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
|
|
}
|
|
|
|
board_config_update
|
|
board=$(board_name)
|
|
ramips_setup_interfaces $board
|
|
ramips_setup_macs $board
|
|
board_config_flush
|
|
|
|
exit 0
|