22e012bad8
Add a patch for hostapd that introduces a config option "start_disabled" which can be used to bring up an AP interface with beaconing disabled. This is useful in a Repeater-AP setup where the Repeater AP has to start beaconing only after the WDS link has been established. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> SVN-Revision: 37730
45 lines
1.4 KiB
Diff
45 lines
1.4 KiB
Diff
--- a/hostapd/config_file.c
|
|
+++ b/hostapd/config_file.c
|
|
@@ -1781,6 +1781,8 @@ static int hostapd_config_fill(struct ho
|
|
}
|
|
} else if (os_strcmp(buf, "wds_sta") == 0) {
|
|
bss->wds_sta = atoi(pos);
|
|
+ } else if (os_strcmp(buf, "start_disabled") == 0) {
|
|
+ bss->start_disabled = atoi(pos);
|
|
} else if (os_strcmp(buf, "ap_isolate") == 0) {
|
|
bss->isolate = atoi(pos);
|
|
} else if (os_strcmp(buf, "ap_max_inactivity") == 0) {
|
|
--- a/hostapd/hostapd.conf
|
|
+++ b/hostapd/hostapd.conf
|
|
@@ -389,6 +389,9 @@ wmm_ac_vo_acm=0
|
|
# use a separate bridge.
|
|
#wds_bridge=wds-br0
|
|
|
|
+# Start the AP with beaconing disabled by default.
|
|
+#start_disabled=0
|
|
+
|
|
# Client isolation can be used to prevent low-level bridging of frames between
|
|
# associated stations in the BSS. By default, this bridging is allowed.
|
|
#ap_isolate=1
|
|
--- a/src/ap/ap_config.h
|
|
+++ b/src/ap/ap_config.h
|
|
@@ -243,6 +243,7 @@ struct hostapd_bss_config {
|
|
int num_deny_mac;
|
|
int wds_sta;
|
|
int isolate;
|
|
+ int start_disabled;
|
|
|
|
int auth_algs; /* bitfield of allowed IEEE 802.11 authentication
|
|
* algorithms, WPA_AUTH_ALG_{OPEN,SHARED,LEAP} */
|
|
--- a/src/ap/hostapd.c
|
|
+++ b/src/ap/hostapd.c
|
|
@@ -819,7 +819,8 @@ static int hostapd_setup_bss(struct host
|
|
return -1;
|
|
}
|
|
|
|
- ieee802_11_set_beacon(hapd);
|
|
+ if (!hapd->conf->start_disabled)
|
|
+ ieee802_11_set_beacon(hapd);
|
|
|
|
if (hapd->wpa_auth && wpa_init_keys(hapd->wpa_auth) < 0)
|
|
return -1;
|