openwrtv4/target/linux/brcm63xx/dts/cpva642.dts
Jonas Gorski b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00

95 lines
1.6 KiB
Text

/dts-v1/;
/include/ "bcm6358.dtsi"
/ {
model = "Telsey CPVA642-type (CPA-ZNTE60T)";
compatible = "telsey,cpva642", "brcm,bcm6358";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
reset {
label = "reset";
gpios = <&gpio1 4 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio1 5 0>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
eth_green {
label = "CPVA642:green:ether";
gpios = <&gpio0 1 1>;
};
phone2_green {
label = "CPVA642:green:phone2";
gpios = <&gpio0 2 1>;
};
usb_green {
label = "CPVA642:green:usb";
gpios = <&gpio0 3 1>;
};
phone1_green {
label = "CPVA642:green:phone1";
gpios = <&gpio0 4 1>;
};
wifi_red {
label = "CPVA642:red:wifi";
gpios = <&gpio0 6 1>;
};
link_red {
label = "CPVA642:red:link";
gpios = <&gpio0 9 1>;
};
link_green {
label = "CPVA642:green:link";
gpios = <&gpio0 10 1>;
};
power_green {
label = "CPVA642:green:power";
gpios = <&gpio0 11 1>;
default-state = "on";
};
power_red {
label = "CPVA642:red:power";
gpios = <&gpio0 14 1>;
};
wifi_green {
label = "CPVA642:green:wifi";
gpios = <&gpio0 28 0>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};