openwrtv4/target/linux/ramips/dts/F5D8235_V2.dts
Roman Yeryomin ae2b43b873 ramips: fix ethernet for f5d8235-v2 board
Belkin F5D8235 v2 has two ethernet switches on board.
One internal rt3052 and rtl8366rb on rgmii interface.
Looks like internal switch settings were lost in
translation to device tree infrastructure.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-11-26 09:58:17 +01:00

145 lines
2.6 KiB
Text

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
model = "Belkin F5D8235 v2";
aliases {
led-boot = &led_router;
led-failsafe = &led_router;
led-running = &led_router;
led-upgrade = &led_router;
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "uboot";
reg = <0x0 0x50000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x790000>;
};
partition@7e0000 {
label = "nvram";
reg = <0x7e0000 0x10000>;
};
factory: partition@7f0000 {
label = "factory";
reg = <0x7f0000 0x10000>;
};
};
};
rtl8366rb {
compatible = "realtek,rtl8366rb";
gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
};
gpio-leds {
compatible = "gpio-leds";
internet {
label = "f5d8235-v2:blue:internet";
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
};
internet2 {
label = "f5d8235-v2:amber:internet";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
modem {
label = "f5d8235-v2:blue:modem";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
modem2 {
label = "f5d8235-v2:amber:modem";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
led_router: router {
label = "f5d8235-v2:blue:router";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
storage {
label = "f5d8235-v2:blue:storage";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
trigger-sources = <&otg_port1>;
linux,default-trigger = "usbport";
};
storage2 {
label = "f5d8235-v2:amber:storage";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
security {
label = "f5d8235-v2:blue:security";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
security2 {
label = "f5d8235-v2:amber:security";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&uboot 0x40004>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
};
&esw {
ralink,rgmii = <1>;
mediatek,portmap = <0x3f>;
ralink,fct2 = <0x0002500c>;
/*
* ext phy base addr 31, rx/tx clock skew 0,
* turbo mii off, rgmi 3.3v off, port 5 polling off
* port5: enabled, gige, full-duplex, rx/tx-flow-control
* port6: enabled, gige, full-duplex, rx/tx-flow-control
*/
ralink,fpa2 = <0x1f003fff>;
};
&wmac {
ralink,mtd-eeprom = <&uboot 0x40000>;
};
&otg {
status = "okay";
};