712ebe95f8
This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ. Specifications: - SoC: Amazon-SE - RAM: 16MB - Storage: 4MB NOR FLash - LEDs: Power, Ethernet, DSL (Sync) - Buttons: 1x Reset Button (not currently supported, will be done) - 1x Ethernet-Port: 1x RJ45 10/100BaseTX - 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+) Installation: - can be done via telnet+tftp or serial console - default passwords: - via telnet (root:admin) - via webinterface http://172.16.1.254:8235/ (admin:coolwhite) Installation via telnet / tftp: host: # your own host must have an tftpd daemon, then do this: host: ifconfig eth0:172 172.16.1.1 up host: # telnet to allnet modem, root:admin host: telnet 172.16.1.254 modem: # kill this daemon, it spams your console modem: killall dsl_cpe_control modem: # change to some place in ram: modem: cd /ramdisk/tftp_upload modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage modem: tftp -g -r uImage 172.16.1.1 modem: # load these extra tools from your tftpd via: modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz modem: tftp -g -r flashwrite 172.16.1.1 modem: tftp -g -r fw_setenv 172.16.1.1 modem: tftp -g -r fw.conf 172.16.1.1 modem: ln -s fw_setenv fw_printenv modem: chmod +x * modem: ./fw_setenv disable_recovery y modem: ./fw_setenv kernel_addr 0xb0010000 modem: ./flashwrite /dev/mtd/1 uImage 0 Installation via serial line at uboot: uboot: # erase everything exept bootloader uboot: protect on b0000000 +10000; protect on b03f0000 +10000 uboot: erase all uboot: # get new firmware via tftp: uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000 uboot: # copy to flash: uboot: cp.b 0x80100000 $(kernel_addr) $(filesize) uboot: # disable proprietary image checking: uboot: setenv disable_recovery=y; saveenv uboot: # reboot with LEDE ;) uboot: reset Ethernet works as expected, DSL syncronization does not work properly currently, I am working on this issue. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
209 lines
4.7 KiB
Bash
Executable file
209 lines
4.7 KiB
Bash
Executable file
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2011-2015 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
. /lib/functions/system.sh
|
|
. /lib/functions/lantiq.sh
|
|
|
|
board_config_update
|
|
|
|
vpi=1
|
|
vci=32
|
|
annex="a"
|
|
encaps="llc"
|
|
payload="bridged"
|
|
lan_mac=""
|
|
wan_mac=""
|
|
interface_wan=""
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
ACMP252|GIGASX76X)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
ALL0333CJ)
|
|
annex="b"
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
ARV4510PW)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
|
|
ucidef_add_switch "switch0" \
|
|
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
|
;;
|
|
|
|
ARV4520PW)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
ARV7506PW11)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
ARV7519PW)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
|
;;
|
|
|
|
ARV7519RW22)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
|
|
;;
|
|
|
|
ASL56026)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
|
|
ucidef_add_switch "switch0"\
|
|
"2:lan" "3:lan" "6t@eth0"
|
|
;;
|
|
|
|
BTHOMEHUBV2B)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
|
|
;;
|
|
|
|
BTHOMEHUBV3A)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
BTHOMEHUBV5A)
|
|
lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
DGN3500*)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
EASY80920NAND|EASY80920NOR)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
FRITZ3370)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
|
|
;;
|
|
|
|
FRITZ7320)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
|
|
;;
|
|
|
|
FRITZ7360SL)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
|
;;
|
|
|
|
H201L)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
|
;;
|
|
|
|
P2601HNFX)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
|
|
;;
|
|
|
|
P2812HNUF*)
|
|
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
|
|
;;
|
|
|
|
TDW8970|TDW8980)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
|
|
;;
|
|
|
|
VG3503J)
|
|
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan:1" "4:lan:2" "6t@eth0"
|
|
;;
|
|
|
|
VR200v)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
|
|
;;
|
|
|
|
VGV7510KW22*)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
VGV7519*)
|
|
wan_mac=$(mtd_get_mac_binary board_config 22)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
WBMR)
|
|
ucidef_add_switch "switch0" \
|
|
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
|
;;
|
|
|
|
WBMR300)
|
|
lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
|
|
wan_mac="$lan_mac"
|
|
ucidef_add_switch "switch0" \
|
|
"5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
|
|
;;
|
|
|
|
*)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
esac
|
|
|
|
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
|
ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
|
|
|
|
if lantiq_is_vdsl_system; then
|
|
interface_wan="ptm0"
|
|
ucidef_add_vdsl_modem "$annex" "av" "ptm"
|
|
else
|
|
interface_wan="nas0"
|
|
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
|
fi
|
|
|
|
ucidef_set_interface_wan "$interface_wan" "pppoe"
|
|
|
|
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
|
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|
|
|