openwrtv4/target/linux/generic/files/drivers/net/phy
Felix Fietkau 6dfea16ab9 ar8216: display flow control info in swconfig get_link in case of autonegatiation too
The swconfig get_link attribute (at least) on AR8327/AR8337 doesn't
consider the autonegotiated flow control.
AR8327/AR8337 provide the info about autonegotiated rx/tx flow control
in bits 10 and 11 of the port status register.
Use these values to display info about autonegotiated rx/tx flow
control as part of the get_link attribute.

Successfully tested on TL-WDR4900 (AR8327 rev.4) and
TL-WDR4300 (AR8327 rev.2).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44023
2015-01-18 00:54:06 +00:00
..
b53 b53: hardcode reset GPIO for Linksys WRT300N 1.1 2014-07-06 11:40:51 +00:00
adm6996.c adm6996: the GPIO interface for the adm6996l does not support switch statistics. 2014-07-05 12:13:56 +00:00
adm6996.h linux/generic: add MIB counters and port status to ADM6996 switch 2014-04-22 08:08:02 +00:00
ar8216.c ar8216: add 802.3az EEE info to swconfig get_link attribute 2015-01-18 00:53:59 +00:00
ar8216.h ar8216: add 802.3az EEE info to swconfig get_link attribute 2015-01-18 00:53:59 +00:00
ar8327.c ar8216: display flow control info in swconfig get_link in case of autonegatiation too 2015-01-18 00:54:06 +00:00
ar8327.h ar8216: display flow control info in swconfig get_link in case of autonegatiation too 2015-01-18 00:54:06 +00:00
ip17xx.c unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range. 2010-10-12 20:49:35 +00:00
mvsw61xx.c mvsw61xx: track and set per-VLAN port state in STU 2015-01-11 17:20:16 +00:00
mvsw61xx.h mvsw61xx: track and set per-VLAN port state in STU 2015-01-11 17:20:16 +00:00
mvswitch.c generic: mvswitch: add detach callback 2013-02-07 15:18:34 +00:00
mvswitch.h rename target/linux/generic-2.6 to generic 2010-06-26 20:42:58 +00:00
psb6970.c unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range. 2010-10-12 20:49:35 +00:00
rtl8306.c revert: kernel: rtl8306: fix max pvid & remove port isolation 2014-03-30 10:04:55 +00:00
rtl8366_smi.c strict_strtoul is obsolete, use kstrtoul instead 2013-07-27 09:23:18 +00:00
rtl8366_smi.h linux: generic: rtl836*: fix compilation with !CONFIG_OF 2012-12-15 13:32:02 +00:00
rtl8366rb.c generic: add port mirroring/monitoring capability to rtl8366rb switch 2013-06-04 13:25:52 +00:00
rtl8366s.c fix rtl8366s OF binding 2013-04-12 18:56:05 +00:00
rtl8367.c rtl8367: add support for configuring the VLAN FID 2013-08-12 17:25:25 +00:00
rtl8367b.c generic: rtl8367: add compatible string with vendor prefix 2013-04-06 17:19:31 +00:00
swconfig.c ar8216: add 802.3az EEE info to swconfig get_link attribute 2015-01-18 00:53:59 +00:00
swconfig_leds.c ar71xx: swconfig: use the local helper to set LED brightness on link down 2014-01-26 16:46:21 +00:00