openwrtv4/target/linux/brcm2708/patches-4.1/0136-cpufreq-bcm2835-Use-firmware-API.patch
John Crispin 22b3e521b5 brcm2708: update 4.1 patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46640
2015-08-17 06:04:32 +00:00

186 lines
6.3 KiB
Diff

From b5f2f604151dff8277c10cca8d3eab0ae9b55373 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
Date: Mon, 20 Jul 2015 12:18:36 +0200
Subject: [PATCH 136/148] cpufreq: bcm2835: Use firmware API
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Use the new firmware API instead of the legacy mailbox API.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/cpufreq/bcm2835-cpufreq.c | 117 +++++++++++++++++---------------------
1 file changed, 53 insertions(+), 64 deletions(-)
--- a/drivers/cpufreq/bcm2835-cpufreq.c
+++ b/drivers/cpufreq/bcm2835-cpufreq.c
@@ -26,7 +26,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/cpufreq.h>
-#include <linux/platform_data/mailbox-bcm2708.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
/* ---------- DEFINES ---------- */
/*#define CPUFREQ_DEBUG_ENABLE*/ /* enable debugging */
@@ -43,23 +43,6 @@
#define print_err(fmt,...) pr_err("%s:%s:%d: "fmt, MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
#define print_info(fmt,...) pr_info("%s: "fmt, MODULE_NAME, ##__VA_ARGS__)
-/* tag part of the message */
-struct vc_msg_tag {
- uint32_t tag_id; /* the message id */
- uint32_t buffer_size; /* size of the buffer (which in this case is always 8 bytes) */
- uint32_t data_size; /* amount of data being sent or received */
- uint32_t dev_id; /* the ID of the clock/voltage to get or set */
- uint32_t val; /* the value (e.g. rate (in Hz)) to set */
-};
-
-/* message structure to be sent to videocore */
-struct vc_msg {
- uint32_t msg_size; /* simply, sizeof(struct vc_msg) */
- uint32_t request_code; /* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */
- struct vc_msg_tag tag; /* the tag structure above to make */
- uint32_t end_tag; /* an end identifier, should be set to NULL */
-};
-
/* ---------- GLOBALS ---------- */
static struct cpufreq_driver bcm2835_cpufreq_driver; /* the cpufreq driver global */
@@ -74,62 +57,63 @@ static struct cpufreq_frequency_table bc
clk_rate either gets or sets the clock rates.
===============================================
*/
-static uint32_t bcm2835_cpufreq_set_clock(int cur_rate, int arm_rate)
+
+static int bcm2835_cpufreq_clock_property(u32 tag, u32 id, u32 *val)
{
- int s, actual_rate=0;
- struct vc_msg msg;
+ struct rpi_firmware *fw = rpi_firmware_get(NULL);
+ struct {
+ u32 id;
+ u32 val;
+ } packet;
+ int ret;
+
+ packet.id = id;
+ packet.val = *val;
+ ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet));
+ if (ret)
+ return ret;
- /* wipe all previous message data */
- memset(&msg, 0, sizeof msg);
+ *val = packet.val;
- msg.msg_size = sizeof msg;
+ return 0;
+}
- msg.tag.tag_id = VCMSG_SET_CLOCK_RATE;
- msg.tag.buffer_size = 8;
- msg.tag.data_size = 8; /* we're sending the clock ID and the new rates which is a total of 2 words */
- msg.tag.dev_id = VCMSG_ID_ARM_CLOCK;
- msg.tag.val = arm_rate * 1000;
+static uint32_t bcm2835_cpufreq_set_clock(int cur_rate, int arm_rate)
+{
+ u32 rate = arm_rate * 1000;
+ int ret;
- /* send the message */
- s = bcm_mailbox_property(&msg, sizeof msg);
+ ret = bcm2835_cpufreq_clock_property(RPI_FIRMWARE_SET_CLOCK_RATE, VCMSG_ID_ARM_CLOCK, &rate);
+ if (ret) {
+ print_err("Failed to set clock: %d (%d)\n", arm_rate, ret);
+ return 0;
+ }
- /* check if it was all ok and return the rate in KHz */
- if (s == 0 && (msg.request_code & 0x80000000))
- actual_rate = msg.tag.val/1000;
+ rate /= 1000;
+ print_debug("Setting new frequency = %d -> %d (actual %d)\n", cur_rate, arm_rate, rate);
- print_debug("Setting new frequency = %d -> %d (actual %d)\n", cur_rate, arm_rate, actual_rate);
- return actual_rate;
+ return rate;
}
static uint32_t bcm2835_cpufreq_get_clock(int tag)
{
- int s;
- int arm_rate = 0;
- struct vc_msg msg;
-
- /* wipe all previous message data */
- memset(&msg, 0, sizeof msg);
-
- msg.msg_size = sizeof msg;
- msg.tag.tag_id = tag;
- msg.tag.buffer_size = 8;
- msg.tag.data_size = 4; /* we're just sending the clock ID which is one word long */
- msg.tag.dev_id = VCMSG_ID_ARM_CLOCK;
-
- /* send the message */
- s = bcm_mailbox_property(&msg, sizeof msg);
-
- /* check if it was all ok and return the rate in KHz */
- if (s == 0 && (msg.request_code & 0x80000000))
- arm_rate = msg.tag.val/1000;
-
- print_debug("%s frequency = %d\n",
- tag == VCMSG_GET_CLOCK_RATE ? "Current":
- tag == VCMSG_GET_MIN_CLOCK ? "Min":
- tag == VCMSG_GET_MAX_CLOCK ? "Max":
- "Unexpected", arm_rate);
+ u32 rate;
+ int ret;
+
+ ret = bcm2835_cpufreq_clock_property(tag, VCMSG_ID_ARM_CLOCK, &rate);
+ if (ret) {
+ print_err("Failed to get clock (%d)\n", ret);
+ return 0;
+ }
+
+ rate /= 1000;
+ print_debug("%s frequency = %u\n",
+ tag == RPI_FIRMWARE_GET_CLOCK_RATE ? "Current":
+ tag == RPI_FIRMWARE_GET_MIN_CLOCK_RATE ? "Min":
+ tag == RPI_FIRMWARE_GET_MAX_CLOCK_RATE ? "Max":
+ "Unexpected", rate);
- return arm_rate;
+ return rate;
}
/*
@@ -165,9 +149,14 @@ static int bcm2835_cpufreq_driver_init(s
/* measured value of how long it takes to change frequency */
const unsigned int transition_latency = 355000; /* ns */
+ if (!rpi_firmware_get(NULL)) {
+ print_err("Firmware is not available\n");
+ return -ENODEV;
+ }
+
/* now find out what the maximum and minimum frequencies are */
- bcm2835_freq_table[0].frequency = bcm2835_cpufreq_get_clock(VCMSG_GET_MIN_CLOCK);
- bcm2835_freq_table[1].frequency = bcm2835_cpufreq_get_clock(VCMSG_GET_MAX_CLOCK);
+ bcm2835_freq_table[0].frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MIN_CLOCK_RATE);
+ bcm2835_freq_table[1].frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MAX_CLOCK_RATE);
print_info("min=%d max=%d\n", bcm2835_freq_table[0].frequency, bcm2835_freq_table[1].frequency);
return cpufreq_generic_init(policy, bcm2835_freq_table, transition_latency);
@@ -201,8 +190,8 @@ static int bcm2835_cpufreq_driver_target
static unsigned int bcm2835_cpufreq_driver_get(unsigned int cpu)
{
- unsigned int actual_rate = bcm2835_cpufreq_get_clock(VCMSG_GET_CLOCK_RATE);
- print_debug("%d: freq=%d\n", cpu, actual_rate);
+ unsigned int actual_rate = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_CLOCK_RATE);
+ print_debug("cpu%d: freq=%d\n", cpu, actual_rate);
return actual_rate <= bcm2835_freq_table[0].frequency ? bcm2835_freq_table[0].frequency : bcm2835_freq_table[1].frequency;
}