KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/package/kernel/lantiq/ltq-adsl-mei/src/drv_mei_cpe.c
Jonas Gorski a9a78a70cc ltq-adsl-mei: use the same file name for all variant 
Due to limitations in the symvers treatment and the mei drivers
exporting the same funtions, modpost might use the wrong mei driver
to link against.

Work around this by renaming them all to the same name, making it
always the "right" module name even if the wrong file was used.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00

2838 lines
79 KiB
C
Raw Blame History

/******************************************************************************
Copyright (c) 2009
Infineon Technologies AG
Am Campeon 1-12; 81726 Munich, Germany
For licensing information, see the file 'LICENSE' in the root folder of
this software module.
******************************************************************************/
/*!
\defgroup AMAZON_S_MEI Amazon-S MEI Driver Module
\brief Amazon-S MEI driver module
*/
/*!
\defgroup Internal Compile Parametere
\ingroup AMAZON_S_MEI
\brief exported functions for other driver use
*/
/*!
\file amazon_s_mei_bsp.c
\ingroup AMAZON_S_MEI
\brief Amazon-S MEI driver file
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/version.h>
#include <generated/utsrelease.h>
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/sched.h>
#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/hardirq.h>
#include "lantiq_atm.h"
#include <lantiq_soc.h>
//#include "ifxmips_atm.h"
#define IFX_MEI_BSP
#include "ifxmips_mei_interface.h"
/*#define LTQ_RCU_RST IFX_RCU_RST_REQ
#define LTQ_RCU_RST_REQ_ARC_JTAG IFX_RCU_RST_REQ_ARC_JTAG
#define LTQ_RCU_RST_REQ_DFE IFX_RCU_RST_REQ_DFE
#define LTQ_RCU_RST_REQ_AFE IFX_RCU_RST_REQ_AFE
#define IFXMIPS_FUSE_BASE_ADDR IFX_FUSE_BASE_ADDR
#define IFXMIPS_ICU_IM0_IER IFX_ICU_IM0_IER
#define IFXMIPS_ICU_IM2_IER IFX_ICU_IM2_IER
#define LTQ_MEI_INT IFX_MEI_INT
#define LTQ_MEI_DYING_GASP_INT IFX_MEI_DYING_GASP_INT
#define LTQ_MEI_BASE_ADDR IFX_MEI_SPACE_ACCESS
#define IFXMIPS_PMU_PWDCR IFX_PMU_PWDCR
#define IFXMIPS_MPS_CHIPID IFX_MPS_CHIPID
#define ifxmips_port_reserve_pin ifx_gpio_pin_reserve
#define ifxmips_port_set_dir_in ifx_gpio_dir_in_set
#define ifxmips_port_clear_altsel0 ifx_gpio_altsel0_set
#define ifxmips_port_clear_altsel1 ifx_gpio_altsel1_clear
#define ifxmips_port_set_open_drain ifx_gpio_open_drain_clear
#define ifxmips_port_free_pin ifx_gpio_pin_free
#define ifxmips_mask_and_ack_irq bsp_mask_and_ack_irq
#define IFXMIPS_MPS_CHIPID_VERSION_GET IFX_MCD_CHIPID_VERSION_GET
#define ltq_r32(reg) __raw_readl(reg)
#define ltq_w32(val, reg) __raw_writel(val, reg)
#define ltq_w32_mask(clear, set, reg) ltq_w32((ltq_r32(reg) & ~clear) | set, reg)
*/
#define LTQ_RCU_BASE_ADDR 0x1F203000
#define LTQ_ICU_BASE_ADDR 0x1F880200
#define LTQ_MEI_BASE_ADDR 0x1E116000
#define LTQ_PMU_BASE_ADDR 0x1F102000
#ifdef CONFIG_DANUBE
# define LTQ_MEI_INT (INT_NUM_IM1_IRL0 + 23)
# define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
# define LTQ_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
#endif
#ifdef CONFIG_AMAZON_SE
# define LTQ_MEI_INT (INT_NUM_IM2_IRL0 + 9)
# define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM2_IRL0 + 11)
# define LTQ_USB_OC_INT (INT_NUM_IM2_IRL0 + 20)
#endif
#ifdef CONFIG_AR9
# define LTQ_MEI_INT (INT_NUM_IM1_IRL0 + 23)
# define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
# define LTQ_USB_OC_INT (INT_NUM_IM1_IRL0 + 28)
#endif
#ifndef LTQ_MEI_INT
#error "Unknown Lantiq ARCH!"
#endif
#define LTQ_RCU_RST_REQ_DFE (1 << 7)
#define LTQ_RCU_RST_REQ_AFE (1 << 11)
#define LTQ_PMU_BASE (KSEG1 + LTQ_PMU_BASE_ADDR)
#define LTQ_RCU_BASE (KSEG1 + LTQ_RCU_BASE_ADDR)
#define LTQ_ICU_BASE (KSEG1 + LTQ_ICU_BASE_ADDR)
#define LTQ_PMU_PWDCR ((u32 *)(LTQ_PMU_BASE + 0x001C))
#define LTQ_PMU_PWDSR ((u32 *)(LTQ_PMU_BASE + 0x0020))
#define LTQ_RCU_RST ((u32 *)(LTQ_RCU_BASE + 0x0010))
#define LTQ_RCU_RST_ALL 0x40000000
#define LTQ_ICU_IM0_ISR ((u32 *)(LTQ_ICU_BASE + 0x0000))
#define LTQ_ICU_IM0_IER ((u32 *)(LTQ_ICU_BASE + 0x0008))
#define LTQ_ICU_IM0_IOSR ((u32 *)(LTQ_ICU_BASE + 0x0010))
#define LTQ_ICU_IM0_IRSR ((u32 *)(LTQ_ICU_BASE + 0x0018))
#define LTQ_ICU_IM0_IMR ((u32 *)(LTQ_ICU_BASE + 0x0020))
#define LTQ_ICU_IM1_ISR ((u32 *)(LTQ_ICU_BASE + 0x0028))
#define LTQ_ICU_IM2_ISR ((u32 *)(LTQ_ICU_BASE + 0x0050))
#define LTQ_ICU_IM3_ISR ((u32 *)(LTQ_ICU_BASE + 0x0078))
#define LTQ_ICU_IM4_ISR ((u32 *)(LTQ_ICU_BASE + 0x00A0))
#define LTQ_ICU_OFFSET (LTQ_ICU_IM1_ISR - LTQ_ICU_IM0_ISR)
#define LTQ_ICU_IM2_IER (LTQ_ICU_IM0_IER + LTQ_ICU_OFFSET)
#define IFX_MEI_EMSG(fmt, args...) pr_err("[%s %d]: " fmt,__FUNCTION__, __LINE__, ## args)
#define IFX_MEI_DMSG(fmt, args...) pr_debug("[%s %d]: " fmt,__FUNCTION__, __LINE__, ## args)
#define LTQ_FUSE_BASE (KSEG1 + 0x1F107354)
#ifdef CONFIG_LTQ_MEI_FW_LOOPBACK
//#define DFE_MEM_TEST
//#define DFE_PING_TEST
#define DFE_ATM_LOOPBACK
#ifdef DFE_ATM_LOOPBACK
#include <asm/ifxmips/ifxmips_mei_fw_loopback.h>
#endif
void dfe_loopback_irq_handler (DSL_DEV_Device_t *pDev);
#endif //CONFIG_AMAZON_S_MEI_FW_LOOPBACK
DSL_DEV_Version_t bsp_mei_version = {
major: 5,
minor: 0,
revision:0
};
DSL_DEV_HwVersion_t bsp_chip_info;
#define IFX_MEI_DEVNAME "ifx_mei"
#define BSP_MAX_DEVICES 1
#define MEI_DIRNAME "ifxmips_mei"
DSL_DEV_MeiError_t DSL_BSP_FWDownload (DSL_DEV_Device_t *, const char *, unsigned long, long *, long *);
DSL_DEV_MeiError_t DSL_BSP_Showtime (DSL_DEV_Device_t *, DSL_uint32_t, DSL_uint32_t);
DSL_DEV_MeiError_t DSL_BSP_AdslLedInit (DSL_DEV_Device_t *, DSL_DEV_LedId_t, DSL_DEV_LedType_t, DSL_DEV_LedHandler_t);
//DSL_DEV_MeiError_t DSL_BSP_AdslLedSet (DSL_DEV_Device_t *, DSL_DEV_LedId_t, DSL_DEV_LedMode_t);
DSL_DEV_MeiError_t DSL_BSP_MemoryDebugAccess (DSL_DEV_Device_t *, DSL_BSP_MemoryAccessType_t, DSL_uint32_t, DSL_uint32_t*, DSL_uint32_t);
DSL_DEV_MeiError_t DSL_BSP_SendCMV (DSL_DEV_Device_t *, u16 *, int, u16 *);
int DSL_BSP_KernelIoctls (DSL_DEV_Device_t *, unsigned int, unsigned long);
static DSL_DEV_MeiError_t IFX_MEI_RunAdslModem (DSL_DEV_Device_t *);
static DSL_DEV_MeiError_t IFX_MEI_CpuModeSet (DSL_DEV_Device_t *, DSL_DEV_CpuMode_t);
static DSL_DEV_MeiError_t IFX_MEI_DownloadBootCode (DSL_DEV_Device_t *);
static DSL_DEV_MeiError_t IFX_MEI_ArcJtagEnable (DSL_DEV_Device_t *, int);
static DSL_DEV_MeiError_t IFX_MEI_AdslMailboxIRQEnable (DSL_DEV_Device_t *, int);
static int IFX_MEI_GetPage (DSL_DEV_Device_t *, u32, u32, u32, u32 *, u32 *);
static int IFX_MEI_BarUpdate (DSL_DEV_Device_t *, int);
static ssize_t IFX_MEI_Write (DSL_DRV_file_t *, const char *, size_t, loff_t *);
static long IFX_MEI_UserIoctls (DSL_DRV_file_t *, unsigned int, unsigned long);
static int IFX_MEI_Open (DSL_DRV_inode_t *, DSL_DRV_file_t *);
static int IFX_MEI_Release (DSL_DRV_inode_t *, DSL_DRV_file_t *);
void AMAZON_SE_MEI_ARC_MUX_Test(void);
void IFX_MEI_ARC_MUX_Test(void);
static int adsl_dummy_ledcallback(void);
int (*ifx_mei_atm_showtime_enter)(struct port_cell_info *, void *) = NULL;
EXPORT_SYMBOL(ifx_mei_atm_showtime_enter);
int (*ifx_mei_atm_showtime_exit)(void) = NULL;
EXPORT_SYMBOL(ifx_mei_atm_showtime_exit);
static int (*g_adsl_ledcallback)(void) = adsl_dummy_ledcallback;
static unsigned int g_tx_link_rate[2] = {0};
static void *g_xdata_addr = NULL;
static u32 *mei_arc_swap_buff = NULL; // holding swap pages
extern void ltq_mask_and_ack_irq(struct irq_data *d);
static void inline MEI_MASK_AND_ACK_IRQ(int x)
{
struct irq_data d;
d.hwirq = x;
ltq_mask_and_ack_irq(&d);
}
#define MEI_MAJOR 105
static int dev_major = MEI_MAJOR;
static struct file_operations bsp_mei_operations = {
owner:THIS_MODULE,
open:IFX_MEI_Open,
release:IFX_MEI_Release,
write:IFX_MEI_Write,
unlocked_ioctl:IFX_MEI_UserIoctls,
};
static DSL_DEV_Device_t dsl_devices[BSP_MAX_DEVICES];
static ifx_mei_device_private_t
sDanube_Mei_Private[BSP_MAX_DEVICES];
static DSL_BSP_EventCallBack_t dsl_bsp_event_callback[DSL_BSP_CB_LAST + 1];
/**
* Write a value to register
* This function writes a value to danube register
*
* \param ul_address The address to write
* \param ul_data The value to write
* \ingroup Internal
*/
static void
IFX_MEI_LongWordWrite (u32 ul_address, u32 ul_data)
{
IFX_MEI_WRITE_REGISTER_L (ul_data, ul_address);
wmb();
return;
}
/**
* Write a value to register
* This function writes a value to danube register
*
* \param pDev the device pointer
* \param ul_address The address to write
* \param ul_data The value to write
* \ingroup Internal
*/
static void
IFX_MEI_LongWordWriteOffset (DSL_DEV_Device_t * pDev, u32 ul_address,
u32 ul_data)
{
IFX_MEI_WRITE_REGISTER_L (ul_data, pDev->base_address + ul_address);
wmb();
return;
}
/**
* Read the danube register
* This function read the value from danube register
*
* \param ul_address The address to write
* \param pul_data Pointer to the data
* \ingroup Internal
*/
static void
IFX_MEI_LongWordRead (u32 ul_address, u32 * pul_data)
{
*pul_data = IFX_MEI_READ_REGISTER_L (ul_address);
rmb();
return;
}
/**
* Read the danube register
* This function read the value from danube register
*
* \param pDev the device pointer
* \param ul_address The address to write
* \param pul_data Pointer to the data
* \ingroup Internal
*/
static void
IFX_MEI_LongWordReadOffset (DSL_DEV_Device_t * pDev, u32 ul_address,
u32 * pul_data)
{
*pul_data = IFX_MEI_READ_REGISTER_L (pDev->base_address + ul_address);
rmb();
return;
}
/**
* Write several DWORD datas to ARC memory via ARC DMA interface
* This function writes several DWORD datas to ARC memory via DMA interface.
*
* \param pDev the device pointer
* \param destaddr The address to write
* \param databuff Pointer to the data buffer
* \param databuffsize Number of DWORDs to write
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_DMAWrite (DSL_DEV_Device_t * pDev, u32 destaddr,
u32 * databuff, u32 databuffsize)
{
u32 *p = databuff;
u32 temp;
if (destaddr & 3)
return DSL_DEV_MEI_ERR_FAILURE;
// Set the write transfer address
IFX_MEI_LongWordWriteOffset (pDev, ME_DX_AD, destaddr);
// Write the data pushed across DMA
while (databuffsize--) {
temp = *p;
if (destaddr == MEI_TO_ARC_MAILBOX)
MEI_HALF_WORD_SWAP (temp);
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_DX_DATA, temp);
p++;
}
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* Read several DWORD datas from ARC memory via ARC DMA interface
* This function reads several DWORD datas from ARC memory via DMA interface.
*
* \param pDev the device pointer
* \param srcaddr The address to read
* \param databuff Pointer to the data buffer
* \param databuffsize Number of DWORDs to read
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_DMARead (DSL_DEV_Device_t * pDev, u32 srcaddr, u32 * databuff,
u32 databuffsize)
{
u32 *p = databuff;
u32 temp;
if (srcaddr & 3)
return DSL_DEV_MEI_ERR_FAILURE;
// Set the read transfer address
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_DX_AD, srcaddr);
// Read the data popped across DMA
while (databuffsize--) {
IFX_MEI_LongWordReadOffset (pDev, (u32) ME_DX_DATA, &temp);
if (databuff == (u32 *) DSL_DEV_PRIVATE(pDev)->CMV_RxMsg) // swap half word
MEI_HALF_WORD_SWAP (temp);
*p = temp;
p++;
}
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* Switch the ARC control mode
* This function switchs the ARC control mode to JTAG mode or MEI mode
*
* \param pDev the device pointer
* \param mode The mode want to switch: JTAG_MASTER_MODE or MEI_MASTER_MODE.
* \ingroup Internal
*/
static void
IFX_MEI_ControlModeSet (DSL_DEV_Device_t * pDev, int mode)
{
u32 temp = 0x0;
IFX_MEI_LongWordReadOffset (pDev, (u32) ME_DBG_MASTER, &temp);
switch (mode) {
case JTAG_MASTER_MODE:
temp &= ~(HOST_MSTR);
break;
case MEI_MASTER_MODE:
temp |= (HOST_MSTR);
break;
default:
IFX_MEI_EMSG ("IFX_MEI_ControlModeSet: unkonwn mode [%d]\n", mode);
return;
}
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_DBG_MASTER, temp);
}
/**
* Disable ARC to MEI interrupt
*
* \param pDev the device pointer
* \ingroup Internal
*/
static void
IFX_MEI_IRQDisable (DSL_DEV_Device_t * pDev)
{
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_ARC2ME_MASK, 0x0);
}
/**
* Eable ARC to MEI interrupt
*
* \param pDev the device pointer
* \ingroup Internal
*/
static void
IFX_MEI_IRQEnable (DSL_DEV_Device_t * pDev)
{
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_ARC2ME_MASK, MSGAV_EN);
}
/**
* Poll for transaction complete signal
* This function polls and waits for transaction complete signal.
*
* \param pDev the device pointer
* \ingroup Internal
*/
static void
meiPollForDbgDone (DSL_DEV_Device_t * pDev)
{
u32 query = 0;
int i = 0;
while (i < WHILE_DELAY) {
IFX_MEI_LongWordReadOffset (pDev, (u32) ME_ARC2ME_STAT, &query);
query &= (ARC_TO_MEI_DBG_DONE);
if (query)
break;
i++;
if (i == WHILE_DELAY) {
IFX_MEI_EMSG ("PollforDbg fail!\n");
}
}
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_ARC2ME_STAT, ARC_TO_MEI_DBG_DONE); // to clear this interrupt
}
/**
* ARC Debug Memory Access for a single DWORD reading.
* This function used for direct, address-based access to ARC memory.
*
* \param pDev the device pointer
* \param DEC_mode ARC memory space to used
* \param address Address to read
* \param data Pointer to data
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
_IFX_MEI_DBGLongWordRead (DSL_DEV_Device_t * pDev, u32 DEC_mode,
u32 address, u32 * data)
{
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_DBG_DECODE, DEC_mode);
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_DBG_RD_AD, address);
meiPollForDbgDone (pDev);
IFX_MEI_LongWordReadOffset (pDev, (u32) ME_DBG_DATA, data);
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* ARC Debug Memory Access for a single DWORD writing.
* This function used for direct, address-based access to ARC memory.
*
* \param pDev the device pointer
* \param DEC_mode ARC memory space to used
* \param address The address to write
* \param data The data to write
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
_IFX_MEI_DBGLongWordWrite (DSL_DEV_Device_t * pDev, u32 DEC_mode,
u32 address, u32 data)
{
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_DBG_DECODE, DEC_mode);
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_DBG_WR_AD, address);
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_DBG_DATA, data);
meiPollForDbgDone (pDev);
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* ARC Debug Memory Access for writing.
* This function used for direct, address-based access to ARC memory.
*
* \param pDev the device pointer
* \param destaddr The address to read
* \param databuffer Pointer to data
* \param databuffsize The number of DWORDs to read
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_DebugWrite (DSL_DEV_Device_t * pDev, u32 destaddr,
u32 * databuff, u32 databuffsize)
{
u32 i;
u32 temp = 0x0;
u32 address = 0x0;
u32 *buffer = 0x0;
// Open the debug port before DMP memory write
IFX_MEI_ControlModeSet (pDev, MEI_MASTER_MODE);
// For the requested length, write the address and write the data
address = destaddr;
buffer = databuff;
for (i = 0; i < databuffsize; i++) {
temp = *buffer;
_IFX_MEI_DBGLongWordWrite (pDev, ME_DBG_DECODE_DMP1_MASK, address, temp);
address += 4;
buffer++;
}
// Close the debug port after DMP memory write
IFX_MEI_ControlModeSet (pDev, JTAG_MASTER_MODE);
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* ARC Debug Memory Access for reading.
* This function used for direct, address-based access to ARC memory.
*
* \param pDev the device pointer
* \param srcaddr The address to read
* \param databuffer Pointer to data
* \param databuffsize The number of DWORDs to read
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_DebugRead (DSL_DEV_Device_t * pDev, u32 srcaddr, u32 * databuff, u32 databuffsize)
{
u32 i;
u32 temp = 0x0;
u32 address = 0x0;
u32 *buffer = 0x0;
// Open the debug port before DMP memory read
IFX_MEI_ControlModeSet (pDev, MEI_MASTER_MODE);
// For the requested length, write the address and read the data
address = srcaddr;
buffer = databuff;
for (i = 0; i < databuffsize; i++) {
_IFX_MEI_DBGLongWordRead (pDev, ME_DBG_DECODE_DMP1_MASK, address, &temp);
*buffer = temp;
address += 4;
buffer++;
}
// Close the debug port after DMP memory read
IFX_MEI_ControlModeSet (pDev, JTAG_MASTER_MODE);
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* Send a message to ARC MailBox.
* This function sends a message to ARC Mailbox via ARC DMA interface.
*
* \param pDev the device pointer
* \param msgsrcbuffer Pointer to message.
* \param msgsize The number of words to write.
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_MailboxWrite (DSL_DEV_Device_t * pDev, u16 * msgsrcbuffer,
u16 msgsize)
{
int i;
u32 arc_mailbox_status = 0x0;
u32 temp = 0;
DSL_DEV_MeiError_t meiMailboxError = DSL_DEV_MEI_ERR_SUCCESS;
// Write to mailbox
meiMailboxError =
IFX_MEI_DMAWrite (pDev, MEI_TO_ARC_MAILBOX, (u32 *) msgsrcbuffer, msgsize / 2);
meiMailboxError =
IFX_MEI_DMAWrite (pDev, MEI_TO_ARC_MAILBOXR, (u32 *) (&temp), 1);
// Notify arc that mailbox write completed
DSL_DEV_PRIVATE(pDev)->cmv_waiting = 1;
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_ME2ARC_INT, MEI_TO_ARC_MSGAV);
i = 0;
while (i < WHILE_DELAY) { // wait for ARC to clear the bit
IFX_MEI_LongWordReadOffset (pDev, (u32) ME_ME2ARC_INT, &arc_mailbox_status);
if ((arc_mailbox_status & MEI_TO_ARC_MSGAV) != MEI_TO_ARC_MSGAV)
break;
i++;
if (i == WHILE_DELAY) {
IFX_MEI_EMSG (">>> Timeout waiting for ARC to clear MEI_TO_ARC_MSGAV!!!"
" MEI_TO_ARC message size = %d DWORDs <<<\n", msgsize/2);
meiMailboxError = DSL_DEV_MEI_ERR_FAILURE;
}
}
return meiMailboxError;
}
/**
* Read a message from ARC MailBox.
* This function reads a message from ARC Mailbox via ARC DMA interface.
*
* \param pDev the device pointer
* \param msgsrcbuffer Pointer to message.
* \param msgsize The number of words to read
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_MailboxRead (DSL_DEV_Device_t * pDev, u16 * msgdestbuffer,
u16 msgsize)
{
DSL_DEV_MeiError_t meiMailboxError = DSL_DEV_MEI_ERR_SUCCESS;
// Read from mailbox
meiMailboxError =
IFX_MEI_DMARead (pDev, ARC_TO_MEI_MAILBOX, (u32 *) msgdestbuffer, msgsize / 2);
// Notify arc that mailbox read completed
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_ARC2ME_STAT, ARC_TO_MEI_MSGAV);
return meiMailboxError;
}
/**
* Download boot pages to ARC.
* This function downloads boot pages to ARC.
*
* \param pDev the device pointer
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_DownloadBootPages (DSL_DEV_Device_t * pDev)
{
int boot_loop;
int page_size;
u32 dest_addr;
/*
** DMA the boot code page(s)
*/
for (boot_loop = 1;
boot_loop <
(DSL_DEV_PRIVATE(pDev)->img_hdr-> count); boot_loop++) {
if ((DSL_DEV_PRIVATE(pDev)-> img_hdr->page[boot_loop].p_size) & BOOT_FLAG) {
page_size = IFX_MEI_GetPage (pDev, boot_loop,
GET_PROG, MAXSWAPSIZE,
mei_arc_swap_buff,
&dest_addr);
if (page_size > 0) {
IFX_MEI_DMAWrite (pDev, dest_addr,
mei_arc_swap_buff,
page_size);
}
}
if ((DSL_DEV_PRIVATE(pDev)-> img_hdr->page[boot_loop].d_size) & BOOT_FLAG) {
page_size = IFX_MEI_GetPage (pDev, boot_loop,
GET_DATA, MAXSWAPSIZE,
mei_arc_swap_buff,
&dest_addr);
if (page_size > 0) {
IFX_MEI_DMAWrite (pDev, dest_addr,
mei_arc_swap_buff,
page_size);
}
}
}
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* Initial efuse rar.
**/
static void
IFX_MEI_FuseInit (DSL_DEV_Device_t * pDev)
{
u32 data = 0;
IFX_MEI_DMAWrite (pDev, IRAM0_BASE, &data, 1);
IFX_MEI_DMAWrite (pDev, IRAM0_BASE + 4, &data, 1);
IFX_MEI_DMAWrite (pDev, IRAM1_BASE, &data, 1);
IFX_MEI_DMAWrite (pDev, IRAM1_BASE + 4, &data, 1);
IFX_MEI_DMAWrite (pDev, BRAM_BASE, &data, 1);
IFX_MEI_DMAWrite (pDev, BRAM_BASE + 4, &data, 1);
IFX_MEI_DMAWrite (pDev, ADSL_DILV_BASE, &data, 1);
IFX_MEI_DMAWrite (pDev, ADSL_DILV_BASE + 4, &data, 1);
}
/**
* efuse rar program
**/
static void
IFX_MEI_FuseProg (DSL_DEV_Device_t * pDev)
{
u32 reg_data, fuse_value;
int i = 0;
IFX_MEI_LongWordRead ((u32) LTQ_RCU_RST, &reg_data);
while ((reg_data & 0x10000000) == 0) {
IFX_MEI_LongWordRead ((u32) LTQ_RCU_RST, &reg_data);
i++;
/* 0x4000 translate to about 16 ms@111M, so should be enough */
if (i == 0x4000)
return;
}
// STEP a: Prepare memory for external accesses
// Write fuse_en bit24
IFX_MEI_LongWordRead ((u32) LTQ_RCU_RST, &reg_data);
IFX_MEI_LongWordWrite ((u32) LTQ_RCU_RST, reg_data | (1 << 24));
IFX_MEI_FuseInit (pDev);
for (i = 0; i < 4; i++) {
IFX_MEI_LongWordRead ((u32) (LTQ_FUSE_BASE) + i * 4, &fuse_value);
switch (fuse_value & 0xF0000) {
case 0x80000:
reg_data = ((fuse_value & RX_DILV_ADDR_BIT_MASK) |
(RX_DILV_ADDR_BIT_MASK + 0x1));
IFX_MEI_DMAWrite (pDev, ADSL_DILV_BASE, &reg_data, 1);
break;
case 0x90000:
reg_data = ((fuse_value & RX_DILV_ADDR_BIT_MASK) |
(RX_DILV_ADDR_BIT_MASK + 0x1));
IFX_MEI_DMAWrite (pDev, ADSL_DILV_BASE + 4, &reg_data, 1);
break;
case 0xA0000:
reg_data = ((fuse_value & IRAM0_ADDR_BIT_MASK) |
(IRAM0_ADDR_BIT_MASK + 0x1));
IFX_MEI_DMAWrite (pDev, IRAM0_BASE, &reg_data, 1);
break;
case 0xB0000:
reg_data = ((fuse_value & IRAM0_ADDR_BIT_MASK) |
(IRAM0_ADDR_BIT_MASK + 0x1));
IFX_MEI_DMAWrite (pDev, IRAM0_BASE + 4, &reg_data, 1);
break;
case 0xC0000:
reg_data = ((fuse_value & IRAM1_ADDR_BIT_MASK) |
(IRAM1_ADDR_BIT_MASK + 0x1));
IFX_MEI_DMAWrite (pDev, IRAM1_BASE, &reg_data, 1);
break;
case 0xD0000:
reg_data = ((fuse_value & IRAM1_ADDR_BIT_MASK) |
(IRAM1_ADDR_BIT_MASK + 0x1));
IFX_MEI_DMAWrite (pDev, IRAM1_BASE + 4, &reg_data, 1);
break;
case 0xE0000:
reg_data = ((fuse_value & BRAM_ADDR_BIT_MASK) |
(BRAM_ADDR_BIT_MASK + 0x1));
IFX_MEI_DMAWrite (pDev, BRAM_BASE, &reg_data, 1);
break;
case 0xF0000:
reg_data = ((fuse_value & BRAM_ADDR_BIT_MASK) |
(BRAM_ADDR_BIT_MASK + 0x1));
IFX_MEI_DMAWrite (pDev, BRAM_BASE + 4, &reg_data, 1);
break;
default: // PPE efuse
break;
}
}
IFX_MEI_LongWordRead ((u32) LTQ_RCU_RST, &reg_data);
IFX_MEI_LongWordWrite ((u32) LTQ_RCU_RST, reg_data & ~(1 << 24));
IFX_MEI_LongWordRead ((u32) LTQ_RCU_RST, &reg_data);
}
/**
* Enable DFE Clock
* This function enables DFE Clock
*
* \param pDev the device pointer
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_EnableCLK (DSL_DEV_Device_t * pDev)
{
u32 arc_debug_data = 0;
IFX_MEI_ControlModeSet (pDev, MEI_MASTER_MODE);
//enable ac_clk signal
_IFX_MEI_DBGLongWordRead (pDev, ME_DBG_DECODE_DMP1_MASK,
CRI_CCR0, &arc_debug_data);
arc_debug_data |= ACL_CLK_MODE_ENABLE;
_IFX_MEI_DBGLongWordWrite (pDev, ME_DBG_DECODE_DMP1_MASK,
CRI_CCR0, arc_debug_data);
IFX_MEI_ControlModeSet (pDev, JTAG_MASTER_MODE);
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* Halt the ARC.
* This function halts the ARC.
*
* \param pDev the device pointer
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_HaltArc (DSL_DEV_Device_t * pDev)
{
u32 arc_debug_data = 0x0;
// Switch arc control from JTAG mode to MEI mode
IFX_MEI_ControlModeSet (pDev, MEI_MASTER_MODE);
_IFX_MEI_DBGLongWordRead (pDev, MEI_DEBUG_DEC_AUX_MASK,
ARC_DEBUG, &arc_debug_data);
arc_debug_data |= ARC_DEBUG_HALT;
_IFX_MEI_DBGLongWordWrite (pDev, MEI_DEBUG_DEC_AUX_MASK,
ARC_DEBUG, arc_debug_data);
// Switch arc control from MEI mode to JTAG mode
IFX_MEI_ControlModeSet (pDev, JTAG_MASTER_MODE);
MEI_WAIT (10);
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* Run the ARC.
* This function runs the ARC.
*
* \param pDev the device pointer
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_RunArc (DSL_DEV_Device_t * pDev)
{
u32 arc_debug_data = 0x0;
// Switch arc control from JTAG mode to MEI mode- write '1' to bit0
IFX_MEI_ControlModeSet (pDev, MEI_MASTER_MODE);
_IFX_MEI_DBGLongWordRead (pDev, MEI_DEBUG_DEC_AUX_MASK,
AUX_STATUS, &arc_debug_data);
// Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared)
arc_debug_data &= ~ARC_AUX_HALT;
_IFX_MEI_DBGLongWordWrite (pDev, MEI_DEBUG_DEC_AUX_MASK,
AUX_STATUS, arc_debug_data);
// Switch arc control from MEI mode to JTAG mode- write '0' to bit0
IFX_MEI_ControlModeSet (pDev, JTAG_MASTER_MODE);
// Enable mask for arc codeswap interrupts
IFX_MEI_IRQEnable (pDev);
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* Reset the ARC.
* This function resets the ARC.
*
* \param pDev the device pointer
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_ResetARC (DSL_DEV_Device_t * pDev)
{
u32 arc_debug_data = 0;
IFX_MEI_HaltArc (pDev);
IFX_MEI_LongWordRead ((u32) LTQ_RCU_RST, &arc_debug_data);
IFX_MEI_LongWordWrite ((u32) LTQ_RCU_RST,
arc_debug_data | LTQ_RCU_RST_REQ_DFE | LTQ_RCU_RST_REQ_AFE);
// reset ARC
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_RST_CTRL, MEI_SOFT_RESET);
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_RST_CTRL, 0);
IFX_MEI_IRQDisable (pDev);
IFX_MEI_EnableCLK (pDev);
#if 0
// reset part of PPE
*(unsigned long *) (BSP_PPE32_SRST) = 0xC30;
*(unsigned long *) (BSP_PPE32_SRST) = 0xFFF;
#endif
DSL_DEV_PRIVATE(pDev)->modem_ready = 0;
return DSL_DEV_MEI_ERR_SUCCESS;
}
DSL_DEV_MeiError_t
DSL_BSP_Showtime (DSL_DEV_Device_t * dev, DSL_uint32_t rate_fast, DSL_uint32_t rate_intl)
{
struct port_cell_info port_cell = {0};
IFX_MEI_EMSG ("Datarate US intl = %d, fast = %d\n", (int)rate_intl,
(int)rate_fast);
if ( rate_fast )
g_tx_link_rate[0] = rate_fast / (53 * 8);
if ( rate_intl )
g_tx_link_rate[1] = rate_intl / (53 * 8);
if ( g_tx_link_rate[0] == 0 && g_tx_link_rate[1] == 0 ) {
IFX_MEI_EMSG ("Got rate fail.\n");
}
if ( ifx_mei_atm_showtime_enter )
{
port_cell.port_num = 2;
port_cell.tx_link_rate[0] = g_tx_link_rate[0];
port_cell.tx_link_rate[1] = g_tx_link_rate[1];
ifx_mei_atm_showtime_enter(&port_cell, g_xdata_addr);
}
else
{
IFX_MEI_EMSG("no hookup from ATM driver to set cell rate\n");
}
return DSL_DEV_MEI_ERR_SUCCESS;
};
/**
* Reset/halt/run the DFE.
* This function provide operations to reset/halt/run the DFE.
*
* \param pDev the device pointer
* \param mode which operation want to do
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_CpuModeSet (DSL_DEV_Device_t *pDev,
DSL_DEV_CpuMode_t mode)
{
DSL_DEV_MeiError_t err_ret = DSL_DEV_MEI_ERR_FAILURE;
switch (mode) {
case DSL_CPU_HALT:
err_ret = IFX_MEI_HaltArc (pDev);
break;
case DSL_CPU_RUN:
err_ret = IFX_MEI_RunArc (pDev);
break;
case DSL_CPU_RESET:
err_ret = IFX_MEI_ResetARC (pDev);
break;
default:
break;
}
return err_ret;
}
/**
* Accress DFE memory.
* This function provide a way to access DFE memory;
*
* \param pDev the device pointer
* \param type read or write
* \param destaddr destination address
* \param databuff pointer to hold data
* \param databuffsize size want to read/write
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
DSL_DEV_MeiError_t
DSL_BSP_MemoryDebugAccess (DSL_DEV_Device_t * pDev,
DSL_BSP_MemoryAccessType_t type,
DSL_uint32_t destaddr, DSL_uint32_t *databuff,
DSL_uint32_t databuffsize)
{
DSL_DEV_MeiError_t meierr = DSL_DEV_MEI_ERR_SUCCESS;
switch (type) {
case DSL_BSP_MEMORY_READ:
meierr = IFX_MEI_DebugRead (pDev, (u32)destaddr, (u32*)databuff, (u32)databuffsize);
break;
case DSL_BSP_MEMORY_WRITE:
meierr = IFX_MEI_DebugWrite (pDev, (u32)destaddr, (u32*)databuff, (u32)databuffsize);
break;
}
return DSL_DEV_MEI_ERR_SUCCESS;
};
/**
* Download boot code to ARC.
* This function downloads boot code to ARC.
*
* \param pDev the device pointer
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_DownloadBootCode (DSL_DEV_Device_t *pDev)
{
IFX_MEI_IRQDisable (pDev);
IFX_MEI_EnableCLK (pDev);
IFX_MEI_FuseProg (pDev); //program fuse rar
IFX_MEI_DownloadBootPages (pDev);
return DSL_DEV_MEI_ERR_SUCCESS;
};
/**
* Enable Jtag debugger interface
* This function setups mips gpio to enable jtag debugger
*
* \param pDev the device pointer
* \param enable enable or disable
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_ArcJtagEnable (DSL_DEV_Device_t *dev, int enable)
{
/*
int meierr=0;
u32 reg_data;
switch (enable) {
case 1:
//reserve gpio 9, 10, 11, 14, 19 for ARC JTAG
ifxmips_port_reserve_pin (0, 9);
ifxmips_port_reserve_pin (0, 10);
ifxmips_port_reserve_pin (0, 11);
ifxmips_port_reserve_pin (0, 14);
ifxmips_port_reserve_pin (1, 3);
ifxmips_port_set_dir_in(0, 11);
ifxmips_port_clear_altsel0(0, 11);
ifxmips_port_clear_altsel1(0, 11);
ifxmips_port_set_open_drain(0, 11);
//enable ARC JTAG
IFX_MEI_LongWordRead ((u32) LTQ_RCU_RST, &reg_data);
IFX_MEI_LongWordWrite ((u32) LTQ_RCU_RST, reg_data | LTQ_RCU_RST_REQ_ARC_JTAG);
break;
case 0:
default:
break;
}
jtag_end:
if (meierr)
return DSL_DEV_MEI_ERR_FAILURE;
*/
return DSL_DEV_MEI_ERR_SUCCESS;
};
/**
* Enable DFE to MIPS interrupt
* This function enable DFE to MIPS interrupt
*
* \param pDev the device pointer
* \param enable enable or disable
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_AdslMailboxIRQEnable (DSL_DEV_Device_t *pDev, int enable)
{
DSL_DEV_MeiError_t meierr;
switch (enable) {
case 0:
meierr = DSL_DEV_MEI_ERR_SUCCESS;
IFX_MEI_IRQDisable (pDev);
break;
case 1:
IFX_MEI_IRQEnable (pDev);
meierr = DSL_DEV_MEI_ERR_SUCCESS;
break;
default:
meierr = DSL_DEV_MEI_ERR_FAILURE;
break;
}
return meierr;
}
/**
* Get the modem status
* This function return the modem status
*
* \param pDev the device pointer
* \return 1: modem ready 0: not ready
* \ingroup Internal
*/
static int
IFX_MEI_IsModemReady (DSL_DEV_Device_t * pDev)
{
return DSL_DEV_PRIVATE(pDev)->modem_ready;
}
DSL_DEV_MeiError_t
DSL_BSP_AdslLedInit (DSL_DEV_Device_t * dev,
DSL_DEV_LedId_t led_number,
DSL_DEV_LedType_t type,
DSL_DEV_LedHandler_t handler)
{
#if 0
struct led_config_param param;
if (led_number == DSL_LED_LINK_ID && type == DSL_LED_LINK_TYPE && handler == /*DSL_LED_HD_CPU*/DSL_LED_HD_FW) {
param.operation_mask = CONFIG_OPERATION_UPDATE_SOURCE;
param.led = 0x01;
param.source = 0x01;
// bsp_led_config (&param);
} else if (led_number == DSL_LED_DATA_ID && type == DSL_LED_DATA_TYPE && (handler == DSL_LED_HD_FW)) {
param.operation_mask = CONFIG_OPERATION_UPDATE_SOURCE;
param.led = 0x02;
param.source = 0x02;
// bsp_led_config (&param);
}
#endif
return DSL_DEV_MEI_ERR_SUCCESS;
};
#if 0
DSL_DEV_MeiError_t
DSL_BSP_AdslLedSet (DSL_DEV_Device_t * dev, DSL_DEV_LedId_t led_number, DSL_DEV_LedMode_t mode)
{
printk(KERN_INFO "[%s %d]: mode = %#x, led_number = %d\n", __func__, __LINE__, mode, led_number);
switch (mode) {
case DSL_LED_OFF:
switch (led_number) {
case DSL_LED_LINK_ID:
#ifdef CONFIG_BSP_LED
bsp_led_set_blink (1, 0);
bsp_led_set_data (1, 0);
#endif
break;
case DSL_LED_DATA_ID:
#ifdef CONFIG_BSP_LED
bsp_led_set_blink (0, 0);
bsp_led_set_data (0, 0);
#endif
break;
}
break;
case DSL_LED_FLASH:
switch (led_number) {
case DSL_LED_LINK_ID:
#ifdef CONFIG_BSP_LED
bsp_led_set_blink (1, 1); // data
#endif
break;
case DSL_LED_DATA_ID:
#ifdef CONFIG_BSP_LED
bsp_led_set_blink (0, 1); // data
#endif
break;
}
break;
case DSL_LED_ON:
switch (led_number) {
case DSL_LED_LINK_ID:
#ifdef CONFIG_BSP_LED
bsp_led_set_blink (1, 0);
bsp_led_set_data (1, 1);
#endif
break;
case DSL_LED_DATA_ID:
#ifdef CONFIG_BSP_LED
bsp_led_set_blink (0, 0);
bsp_led_set_data (0, 1);
#endif
break;
}
break;
}
return DSL_DEV_MEI_ERR_SUCCESS;
};
#endif
/**
* Compose a message.
* This function compose a message from opcode, group, address, index, size, and data
*
* \param opcode The message opcode
* \param group The message group number
* \param address The message address.
* \param index The message index.
* \param size The number of words to read/write.
* \param data The pointer to data.
* \param CMVMSG The pointer to message buffer.
* \ingroup Internal
*/
void
makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data, u16 *CMVMSG)
{
memset (CMVMSG, 0, MSG_LENGTH * 2);
CMVMSG[0] = (opcode << 4) + (size & 0xf);
CMVMSG[1] = (((index == 0) ? 0 : 1) << 7) + (group & 0x7f);
CMVMSG[2] = address;
CMVMSG[3] = index;
if (opcode == H2D_CMV_WRITE)
memcpy (CMVMSG + 4, data, size * 2);
return;
}
/**
* Send a message to ARC and read the response
* This function sends a message to arc, waits the response, and reads the responses.
*
* \param pDev the device pointer
* \param request Pointer to the request
* \param reply Wait reply or not.
* \param response Pointer to the response
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
DSL_DEV_MeiError_t
DSL_BSP_SendCMV (DSL_DEV_Device_t * pDev, u16 * request, int reply, u16 * response) // write cmv to arc, if reply needed, wait for reply
{
DSL_DEV_MeiError_t meierror;
#if defined(BSP_PORT_RTEMS)
int delay_counter = 0;
#endif
if (MEI_MUTEX_LOCK (DSL_DEV_PRIVATE(pDev)->mei_cmv_sema))
return -ERESTARTSYS;
DSL_DEV_PRIVATE(pDev)->cmv_reply = reply;
memset (DSL_DEV_PRIVATE(pDev)->CMV_RxMsg, 0,
sizeof (DSL_DEV_PRIVATE(pDev)->
CMV_RxMsg));
DSL_DEV_PRIVATE(pDev)->arcmsgav = 0;
meierror = IFX_MEI_MailboxWrite (pDev, request, MSG_LENGTH);
if (meierror != DSL_DEV_MEI_ERR_SUCCESS) {
DSL_DEV_PRIVATE(pDev)->cmv_waiting = 0;
DSL_DEV_PRIVATE(pDev)->arcmsgav = 0;
IFX_MEI_EMSG ("MailboxWrite Fail!\n");
IFX_MEI_EMSG ("Resetting ARC...\n");
IFX_MEI_ResetARC(pDev);
MEI_MUTEX_UNLOCK (DSL_DEV_PRIVATE(pDev)->mei_cmv_sema);
return meierror;
}
else {
DSL_DEV_PRIVATE(pDev)->cmv_count++;
}
if (DSL_DEV_PRIVATE(pDev)->cmv_reply ==
NO_REPLY) {
MEI_MUTEX_UNLOCK (DSL_DEV_PRIVATE(pDev)->mei_cmv_sema);
return DSL_DEV_MEI_ERR_SUCCESS;
}
#if !defined(BSP_PORT_RTEMS)
if (DSL_DEV_PRIVATE(pDev)->arcmsgav == 0)
MEI_WAIT_EVENT_TIMEOUT (DSL_DEV_PRIVATE(pDev)->wait_queue_arcmsgav, CMV_TIMEOUT);
#else
while (DSL_DEV_PRIVATE(pDev)->arcmsgav == 0 && delay_counter < CMV_TIMEOUT / 5) {
MEI_WAIT (5);
delay_counter++;
}
#endif
DSL_DEV_PRIVATE(pDev)->cmv_waiting = 0;
if (DSL_DEV_PRIVATE(pDev)->arcmsgav == 0) { //CMV_timeout
DSL_DEV_PRIVATE(pDev)->arcmsgav = 0;
IFX_MEI_EMSG ("\%s: DSL_DEV_MEI_ERR_MAILBOX_TIMEOUT\n",
__FUNCTION__);
MEI_MUTEX_UNLOCK (DSL_DEV_PRIVATE(pDev)->mei_cmv_sema);
return DSL_DEV_MEI_ERR_MAILBOX_TIMEOUT;
}
else {
DSL_DEV_PRIVATE(pDev)->arcmsgav = 0;
DSL_DEV_PRIVATE(pDev)->
reply_count++;
memcpy (response, DSL_DEV_PRIVATE(pDev)->CMV_RxMsg, MSG_LENGTH * 2);
MEI_MUTEX_UNLOCK (DSL_DEV_PRIVATE(pDev)->mei_cmv_sema);
return DSL_DEV_MEI_ERR_SUCCESS;
}
MEI_MUTEX_UNLOCK (DSL_DEV_PRIVATE(pDev)->mei_cmv_sema);
return DSL_DEV_MEI_ERR_SUCCESS;
}
/**
* Reset the ARC, download boot codes, and run the ARC.
* This function resets the ARC, downloads boot codes to ARC, and runs the ARC.
*
* \param pDev the device pointer
* \return DSL_DEV_MEI_ERR_SUCCESS or DSL_DEV_MEI_ERR_FAILURE
* \ingroup Internal
*/
static DSL_DEV_MeiError_t
IFX_MEI_RunAdslModem (DSL_DEV_Device_t *pDev)
{
int nSize = 0, idx = 0;
uint32_t im0_register, im2_register;
// DSL_DEV_WinHost_Message_t m;
if (mei_arc_swap_buff == NULL) {
mei_arc_swap_buff =
(u32 *) kmalloc (MAXSWAPSIZE * 4, GFP_KERNEL);
if (mei_arc_swap_buff == NULL) {
IFX_MEI_EMSG (">>> malloc fail for codeswap buff!!! <<<\n");
return DSL_DEV_MEI_ERR_FAILURE;
}
IFX_MEI_DMSG("allocate %dKB swap buff memory at: 0x%p\n", ksize(mei_arc_swap_buff)/1024, mei_arc_swap_buff);
}
DSL_DEV_PRIVATE(pDev)->img_hdr =
(ARC_IMG_HDR *) DSL_DEV_PRIVATE(pDev)->adsl_mem_info[0].address;
if ((DSL_DEV_PRIVATE(pDev)->img_hdr->
count) * sizeof (ARC_SWP_PAGE_HDR) > SDRAM_SEGMENT_SIZE) {
IFX_MEI_EMSG ("firmware header size is bigger than 64K segment size\n");
return DSL_DEV_MEI_ERR_FAILURE;
}
// check image size
for (idx = 0; idx < MAX_BAR_REGISTERS; idx++) {
nSize += DSL_DEV_PRIVATE(pDev)->adsl_mem_info[idx].nCopy;
}
if (nSize !=
DSL_DEV_PRIVATE(pDev)->image_size) {
IFX_MEI_EMSG ("Firmware download is not completed. Please download firmware again!\n");
return DSL_DEV_MEI_ERR_FAILURE;
}
// TODO: check crc
///
IFX_MEI_ResetARC (pDev);
IFX_MEI_HaltArc (pDev);
IFX_MEI_BarUpdate (pDev, DSL_DEV_PRIVATE(pDev)->nBar);
//IFX_MEI_DMSG("Starting to meiDownloadBootCode\n");
IFX_MEI_DownloadBootCode (pDev);
im0_register = (*LTQ_ICU_IM0_IER) & (1 << 20);
im2_register = (*LTQ_ICU_IM2_IER) & (1 << 20);
/* Turn off irq */
disable_irq (LTQ_USB_OC_INT);
disable_irq (pDev->nIrq[IFX_DYING_GASP]);
IFX_MEI_RunArc (pDev);
MEI_WAIT_EVENT_TIMEOUT (DSL_DEV_PRIVATE(pDev)->wait_queue_modemready, 1000);
MEI_MASK_AND_ACK_IRQ (LTQ_USB_OC_INT);
MEI_MASK_AND_ACK_IRQ (pDev->nIrq[IFX_DYING_GASP]);
/* Re-enable irq */
enable_irq(pDev->nIrq[IFX_DYING_GASP]);
*LTQ_ICU_IM0_IER |= im0_register;
*LTQ_ICU_IM2_IER |= im2_register;
if (DSL_DEV_PRIVATE(pDev)->modem_ready != 1) {
IFX_MEI_EMSG ("Modem failed to be ready!\n");
return DSL_DEV_MEI_ERR_FAILURE;
} else {
IFX_MEI_DMSG("Modem is ready.\n");
return DSL_DEV_MEI_ERR_SUCCESS;
}
}
/**
* Get the page's data pointer
* This function caculats the data address from the firmware header.
*
* \param pDev the device pointer
* \param Page The page number.
* \param data Data page or program page.
* \param MaxSize The maximum size to read.
* \param Buffer Pointer to data.
* \param Dest Pointer to the destination address.
* \return The number of bytes to read.
* \ingroup Internal
*/
static int
IFX_MEI_GetPage (DSL_DEV_Device_t * pDev, u32 Page, u32 data,
u32 MaxSize, u32 * Buffer, u32 * Dest)
{
u32 size;
u32 i;
u32 *p;
u32 idx, offset, nBar = 0;
if (Page > DSL_DEV_PRIVATE(pDev)->img_hdr->count)
return -2;
/*
** Get program or data size, depending on "data" flag
*/
size = (data == GET_DATA) ? (DSL_DEV_PRIVATE(pDev)->img_hdr->page[Page].d_size) :
(DSL_DEV_PRIVATE(pDev)->img_hdr->page[Page].p_size);
size &= BOOT_FLAG_MASK; // Clear boot bit!
if (size > MaxSize)
return -1;
if (size == 0)
return 0;
/*
** Get program or data offset, depending on "data" flag
*/
i = data ? (DSL_DEV_PRIVATE(pDev)->img_hdr->page[Page].d_offset) :
(DSL_DEV_PRIVATE(pDev)->img_hdr->page[Page].p_offset);
/*
** Copy data/program to buffer
*/
idx = i / SDRAM_SEGMENT_SIZE;
offset = i % SDRAM_SEGMENT_SIZE;
p = (u32 *) ((u8 *) DSL_DEV_PRIVATE(pDev)->adsl_mem_info[idx].address + offset);
for (i = 0; i < size; i++) {
if (offset + i * 4 - (nBar * SDRAM_SEGMENT_SIZE) >= SDRAM_SEGMENT_SIZE) {
idx++;
nBar++;
p = (u32 *) ((u8 *) KSEG1ADDR ((u32)DSL_DEV_PRIVATE(pDev)->adsl_mem_info[idx].address));
}
Buffer[i] = *p++;
}
/*
** Pass back data/program destination address
*/
*Dest = data ? (DSL_DEV_PRIVATE(pDev)-> img_hdr->page[Page].d_dest) :
(DSL_DEV_PRIVATE(pDev)->img_hdr->page[Page].p_dest);
return size;
}
/**
* Free the memory for ARC firmware
*
* \param pDev the device pointer
* \param type Free all memory or free the unused memory after showtime
* \ingroup Internal
*/
const char *free_str[4] = {"Invalid", "Free_Reload", "Free_Showtime", "Free_All"};
static int
IFX_MEI_DFEMemoryFree (DSL_DEV_Device_t * pDev, int type)
{
int idx = 0;
smmu_mem_info_t *adsl_mem_info =
DSL_DEV_PRIVATE(pDev)->adsl_mem_info;
for (idx = 0; idx < MAX_BAR_REGISTERS; idx++) {
if (type == FREE_ALL ||adsl_mem_info[idx].type == type) {
if (adsl_mem_info[idx].size > 0) {
IFX_MEI_DMSG ("Freeing memory %p (%s)\n", adsl_mem_info[idx].org_address, free_str[adsl_mem_info[idx].type]);
if ( idx == XDATA_REGISTER ) {
g_xdata_addr = NULL;
if ( ifx_mei_atm_showtime_exit )
ifx_mei_atm_showtime_exit();
}
kfree (adsl_mem_info[idx].org_address);
adsl_mem_info[idx].org_address = 0;
adsl_mem_info[idx].address = 0;
adsl_mem_info[idx].size = 0;
adsl_mem_info[idx].type = 0;
adsl_mem_info[idx].nCopy = 0;
}
}
}
if(mei_arc_swap_buff != NULL){
IFX_MEI_DMSG("free %dKB swap buff memory at: 0x%p\n", ksize(mei_arc_swap_buff)/1024, mei_arc_swap_buff);
kfree(mei_arc_swap_buff);
mei_arc_swap_buff=NULL;
}
return 0;
}
static int
IFX_MEI_DFEMemoryAlloc (DSL_DEV_Device_t * pDev, long size)
{
unsigned long mem_ptr;
char *org_mem_ptr = NULL;
int idx = 0;
long total_size = 0;
int err = 0;
smmu_mem_info_t *adsl_mem_info =
((ifx_mei_device_private_t *) pDev->pPriv)->adsl_mem_info;
// DSL_DEV_PRIVATE(pDev)->adsl_mem_info;
int allocate_size = SDRAM_SEGMENT_SIZE;
IFX_MEI_DMSG("image_size = %ld\n", size);
// Alloc Swap Pages
for (idx = 0; size > 0 && idx < MAX_BAR_REGISTERS; idx++) {
// skip bar15 for XDATA usage.
if (idx == XDATA_REGISTER)
continue;
#if 0
if (size < SDRAM_SEGMENT_SIZE) {
allocate_size = size;
if (allocate_size < 1024)
allocate_size = 1024;
}
#endif
if (idx == (MAX_BAR_REGISTERS - 1))
allocate_size = size;
else
allocate_size = SDRAM_SEGMENT_SIZE;
org_mem_ptr = kmalloc (allocate_size, GFP_KERNEL);
if (org_mem_ptr == NULL) {
IFX_MEI_EMSG ("%d: kmalloc %d bytes memory fail!\n", idx, allocate_size);
err = -ENOMEM;
goto allocate_error;
}
if (((unsigned long)org_mem_ptr) & (1023)) {
/* Pointer not 1k aligned, so free it and allocate a larger chunk
* for further alignment.
*/
kfree(org_mem_ptr);
org_mem_ptr = kmalloc (allocate_size + 1024, GFP_KERNEL);
if (org_mem_ptr == NULL) {
IFX_MEI_EMSG ("%d: kmalloc %d bytes memory fail!\n",
idx, allocate_size + 1024);
err = -ENOMEM;
goto allocate_error;
}
mem_ptr = (unsigned long) (org_mem_ptr + 1023) & ~(1024 -1);
} else {
mem_ptr = (unsigned long) org_mem_ptr;
}
adsl_mem_info[idx].address = (char *) mem_ptr;
adsl_mem_info[idx].org_address = org_mem_ptr;
adsl_mem_info[idx].size = allocate_size;
size -= allocate_size;
total_size += allocate_size;
}
if (size > 0) {
IFX_MEI_EMSG ("Image size is too large!\n");
err = -EFBIG;
goto allocate_error;
}
err = idx;
return err;
allocate_error:
IFX_MEI_DFEMemoryFree (pDev, FREE_ALL);
return err;
}
/**
* Program the BAR registers
*
* \param pDev the device pointer
* \param nTotalBar The number of bar to program.
* \ingroup Internal
*/
static int
IFX_MEI_BarUpdate (DSL_DEV_Device_t * pDev, int nTotalBar)
{
int idx = 0;
smmu_mem_info_t *adsl_mem_info =
DSL_DEV_PRIVATE(pDev)->adsl_mem_info;
for (idx = 0; idx < nTotalBar; idx++) {
//skip XDATA register
if (idx == XDATA_REGISTER)
continue;
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_XMEM_BAR_BASE + idx * 4,
(((uint32_t) adsl_mem_info[idx].address) & 0x0FFFFFFF));
}
for (idx = nTotalBar; idx < MAX_BAR_REGISTERS; idx++) {
if (idx == XDATA_REGISTER)
continue;
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_XMEM_BAR_BASE + idx * 4,
(((uint32_t)adsl_mem_info[nTotalBar - 1].address) & 0x0FFFFFFF));
/* These are for /proc/danube_mei/meminfo purpose */
adsl_mem_info[idx].address = adsl_mem_info[nTotalBar - 1].address;
adsl_mem_info[idx].org_address = adsl_mem_info[nTotalBar - 1].org_address;
adsl_mem_info[idx].size = 0; /* Prevent it from being freed */
}
g_xdata_addr = adsl_mem_info[XDATA_REGISTER].address;
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_XMEM_BAR_BASE + XDATA_REGISTER * 4,
(((uint32_t) adsl_mem_info [XDATA_REGISTER].address) & 0x0FFFFFFF));
// update MEI_XDATA_BASE_SH
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_XDATA_BASE_SH,
((unsigned long)adsl_mem_info[XDATA_REGISTER].address) & 0x0FFFFFFF);
return DSL_DEV_MEI_ERR_SUCCESS;
}
/* This copies the firmware from secondary storage to 64k memory segment in SDRAM */
DSL_DEV_MeiError_t
DSL_BSP_FWDownload (DSL_DEV_Device_t * pDev, const char *buf,
unsigned long size, long *loff, long *current_offset)
{
ARC_IMG_HDR img_hdr_tmp;
smmu_mem_info_t *adsl_mem_info = DSL_DEV_PRIVATE(pDev)->adsl_mem_info;
size_t nRead = 0, nCopy = 0;
char *mem_ptr;
char *org_mem_ptr = NULL;
ssize_t retval = -ENOMEM;
int idx = 0;
IFX_MEI_DMSG("\n");
if (*loff == 0) {
if (size < sizeof (img_hdr_tmp)) {
IFX_MEI_EMSG ("Firmware size is too small!\n");
return retval;
}
copy_from_user ((char *) &img_hdr_tmp, buf, sizeof (img_hdr_tmp));
// header of image_size and crc are not included.
DSL_DEV_PRIVATE(pDev)->image_size = le32_to_cpu (img_hdr_tmp.size) + 8;
if (DSL_DEV_PRIVATE(pDev)->image_size > 1024 * 1024) {
IFX_MEI_EMSG ("Firmware size is too large!\n");
return retval;
}
// check if arc is halt
IFX_MEI_ResetARC (pDev);
IFX_MEI_HaltArc (pDev);
IFX_MEI_DFEMemoryFree (pDev, FREE_ALL); //free all
retval = IFX_MEI_DFEMemoryAlloc (pDev, DSL_DEV_PRIVATE(pDev)->image_size);
if (retval < 0) {
IFX_MEI_EMSG ("Error: No memory space left.\n");
goto error;
}
for (idx = 0; idx < retval; idx++) {
//skip XDATA register
if (idx == XDATA_REGISTER)
continue;
if (idx * SDRAM_SEGMENT_SIZE < le32_to_cpu (img_hdr_tmp.page[0].p_offset))
adsl_mem_info[idx].type = FREE_RELOAD;
else
adsl_mem_info[idx].type = FREE_SHOWTIME;
}
DSL_DEV_PRIVATE(pDev)->nBar = retval;
DSL_DEV_PRIVATE(pDev)->img_hdr =
(ARC_IMG_HDR *) adsl_mem_info[0].address;
org_mem_ptr = kmalloc (SDRAM_SEGMENT_SIZE, GFP_KERNEL);
if (org_mem_ptr == NULL) {
IFX_MEI_EMSG ("kmalloc memory fail!\n");
retval = -ENOMEM;
goto error;
}
if (((unsigned long)org_mem_ptr) & (1023)) {
/* Pointer not 1k aligned, so free it and allocate a larger chunk
* for further alignment.
*/
kfree(org_mem_ptr);
org_mem_ptr = kmalloc (SDRAM_SEGMENT_SIZE + 1024, GFP_KERNEL);
if (org_mem_ptr == NULL) {
IFX_MEI_EMSG ("kmalloc memory fail!\n");
retval = -ENOMEM;
goto error;
}
adsl_mem_info[XDATA_REGISTER].address =
(char *) ((unsigned long) (org_mem_ptr + 1023) & ~(1024 -1));
} else {
adsl_mem_info[XDATA_REGISTER].address = org_mem_ptr;
}
adsl_mem_info[XDATA_REGISTER].org_address = org_mem_ptr;
adsl_mem_info[XDATA_REGISTER].size = SDRAM_SEGMENT_SIZE;
adsl_mem_info[XDATA_REGISTER].type = FREE_RELOAD;
IFX_MEI_DMSG("-> IFX_MEI_BarUpdate()\n");
IFX_MEI_BarUpdate (pDev, (DSL_DEV_PRIVATE(pDev)->nBar));
}
else if (DSL_DEV_PRIVATE(pDev)-> image_size == 0) {
IFX_MEI_EMSG ("Error: Firmware size=0! \n");
goto error;
}
nRead = 0;
while (nRead < size) {
long offset = ((long) (*loff) + nRead) % SDRAM_SEGMENT_SIZE;
idx = (((long) (*loff)) + nRead) / SDRAM_SEGMENT_SIZE;
mem_ptr = (char *) KSEG1ADDR ((unsigned long) (adsl_mem_info[idx].address) + offset);
if ((size - nRead + offset) > SDRAM_SEGMENT_SIZE)
nCopy = SDRAM_SEGMENT_SIZE - offset;
else
nCopy = size - nRead;
copy_from_user (mem_ptr, buf + nRead, nCopy);
for (offset = 0; offset < (nCopy / 4); offset++) {
((unsigned long *) mem_ptr)[offset] = le32_to_cpu (((unsigned long *) mem_ptr)[offset]);
}
nRead += nCopy;
adsl_mem_info[idx].nCopy += nCopy;
}
*loff += size;
*current_offset = size;
return DSL_DEV_MEI_ERR_SUCCESS;
error:
IFX_MEI_DFEMemoryFree (pDev, FREE_ALL);
return DSL_DEV_MEI_ERR_FAILURE;
}
/*
* Register a callback event.
* Return:
* -1 if the event already has a callback function registered.
* 0 success
*/
int DSL_BSP_EventCBRegister(DSL_BSP_EventCallBack_t *p)
{
if (!p) {
IFX_MEI_EMSG("Invalid parameter!\n");
return -EINVAL;
}
if (p->event > DSL_BSP_CB_LAST || p->event < DSL_BSP_CB_FIRST) {
IFX_MEI_EMSG("Invalid Event %d\n", p->event);
return -EINVAL;
}
if (dsl_bsp_event_callback[p->event].function) {
IFX_MEI_EMSG("Event %d already has a callback function registered!\n", p->event);
return -1;
} else {
dsl_bsp_event_callback[p->event].function = p->function;
dsl_bsp_event_callback[p->event].event = p->event;
dsl_bsp_event_callback[p->event].pData = p->pData;
}
return 0;
}
int DSL_BSP_EventCBUnregister(DSL_BSP_EventCallBack_t *p)
{
if (!p) {
IFX_MEI_EMSG("Invalid parameter!\n");
return -EINVAL;
}
if (p->event > DSL_BSP_CB_LAST || p->event < DSL_BSP_CB_FIRST) {
IFX_MEI_EMSG("Invalid Event %d\n", p->event);
return -EINVAL;
}
if (dsl_bsp_event_callback[p->event].function) {
IFX_MEI_EMSG("Unregistering Event %d...\n", p->event);
dsl_bsp_event_callback[p->event].function = NULL;
dsl_bsp_event_callback[p->event].pData = NULL;
} else {
IFX_MEI_EMSG("Event %d is not registered!\n", p->event);
return -1;
}
return 0;
}
/**
* MEI Dying Gasp interrupt handler
*
* \param int1
* \param void0
* \param regs Pointer to the structure of danube mips registers
* \ingroup Internal
*/
/*static irqreturn_t IFX_MEI_Dying_Gasp_IrqHandle (int int1, void *void0)
{
DSL_DEV_Device_t *pDev = (DSL_DEV_Device_t *) void0;
DSL_BSP_CB_Type_t event;
if (pDev == NULL)
IFX_MEI_EMSG("Error: Got Interrupt but pDev is NULL!!!!\n");
#ifndef CONFIG_SMP
disable_irq (pDev->nIrq[IFX_DYING_GASP]);
#else
disable_irq_nosync(pDev->nIrq[IFX_DYING_GASP]);
#endif
event = DSL_BSP_CB_DYING_GASP;
if (dsl_bsp_event_callback[event].function)
(*dsl_bsp_event_callback[event].function)(pDev, event, dsl_bsp_event_callback[event].pData);
#ifdef CONFIG_USE_EMULATOR
IFX_MEI_EMSG("Dying Gasp! Shutting Down... (Work around for Amazon-S Venus emulator)\n");
#else
IFX_MEI_EMSG("Dying Gasp! Shutting Down...\n");
// kill_proc (1, SIGINT, 1);
#endif
return IRQ_HANDLED;
}
*/
extern void ifx_usb_enable_afe_oc(void);
/**
* MEI interrupt handler
*
* \param int1
* \param void0
* \param regs Pointer to the structure of danube mips registers
* \ingroup Internal
*/
static irqreturn_t IFX_MEI_IrqHandle (int int1, void *void0)
{
u32 scratch;
DSL_DEV_Device_t *pDev = (DSL_DEV_Device_t *) void0;
#if defined(CONFIG_LTQ_MEI_FW_LOOPBACK) && defined(DFE_PING_TEST)
dfe_loopback_irq_handler (pDev);
return IRQ_HANDLED;
#endif //CONFIG_AMAZON_S_MEI_FW_LOOPBACK
DSL_BSP_CB_Type_t event;
if (pDev == NULL)
IFX_MEI_EMSG("Error: Got Interrupt but pDev is NULL!!!!\n");
IFX_MEI_DebugRead (pDev, ARC_MEI_MAILBOXR, &scratch, 1);
if (scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK) {
IFX_MEI_EMSG("Receive Code Swap Request interrupt!!!\n");
return IRQ_HANDLED;
}
else if (scratch & OMB_CLEAREOC_INTERRUPT_CODE) {
// clear eoc message interrupt
IFX_MEI_DMSG("OMB_CLEAREOC_INTERRUPT_CODE\n");
event = DSL_BSP_CB_CEOC_IRQ;
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_ARC2ME_STAT, ARC_TO_MEI_MSGAV);
if (dsl_bsp_event_callback[event].function)
(*dsl_bsp_event_callback[event].function)(pDev, event, dsl_bsp_event_callback[event].pData);
} else if (scratch & OMB_REBOOT_INTERRUPT_CODE) {
// Reboot
IFX_MEI_DMSG("OMB_REBOOT_INTERRUPT_CODE\n");
event = DSL_BSP_CB_FIRMWARE_REBOOT;
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_ARC2ME_STAT, ARC_TO_MEI_MSGAV);
if (dsl_bsp_event_callback[event].function)
(*dsl_bsp_event_callback[event].function)(pDev, event, dsl_bsp_event_callback[event].pData);
} else { // normal message
IFX_MEI_MailboxRead (pDev, DSL_DEV_PRIVATE(pDev)->CMV_RxMsg, MSG_LENGTH);
if (DSL_DEV_PRIVATE(pDev)-> cmv_waiting == 1) {
DSL_DEV_PRIVATE(pDev)-> arcmsgav = 1;
DSL_DEV_PRIVATE(pDev)-> cmv_waiting = 0;
#if !defined(BSP_PORT_RTEMS)
MEI_WAKEUP_EVENT (DSL_DEV_PRIVATE(pDev)->wait_queue_arcmsgav);
#endif
}
else {
DSL_DEV_PRIVATE(pDev)-> modem_ready_cnt++;
memcpy ((char *) DSL_DEV_PRIVATE(pDev)->Recent_indicator,
(char *) DSL_DEV_PRIVATE(pDev)->CMV_RxMsg, MSG_LENGTH * 2);
if (((DSL_DEV_PRIVATE(pDev)->CMV_RxMsg[0] & 0xff0) >> 4) == D2H_AUTONOMOUS_MODEM_READY_MSG) {
//check ARC ready message
IFX_MEI_DMSG ("Got MODEM_READY_MSG\n");
DSL_DEV_PRIVATE(pDev)->modem_ready = 1;
MEI_WAKEUP_EVENT (DSL_DEV_PRIVATE(pDev)->wait_queue_modemready);
}
}
}
return IRQ_HANDLED;
}
int
DSL_BSP_ATMLedCBRegister (int (*ifx_adsl_ledcallback) (void))
{
g_adsl_ledcallback = ifx_adsl_ledcallback;
return 0;
}
int
DSL_BSP_ATMLedCBUnregister (int (*ifx_adsl_ledcallback) (void))
{
g_adsl_ledcallback = adsl_dummy_ledcallback;
return 0;
}
#if 0
int
DSL_BSP_EventCBRegister (int (*ifx_adsl_callback)
(DSL_BSP_CB_Event_t * param))
{
int error = 0;
if (DSL_EventCB == NULL) {
DSL_EventCB = ifx_adsl_callback;
}
else {
error = -EIO;
}
return error;
}
int
DSL_BSP_EventCBUnregister (int (*ifx_adsl_callback)
(DSL_BSP_CB_Event_t * param))
{
int error = 0;
if (DSL_EventCB == ifx_adsl_callback) {
DSL_EventCB = NULL;
}
else {
error = -EIO;
}
return error;
}
static int
DSL_BSP_GetEventCB (int (**ifx_adsl_callback)
(DSL_BSP_CB_Event_t * param))
{
*ifx_adsl_callback = DSL_EventCB;
return 0;
}
#endif
#ifdef CONFIG_LTQ_MEI_FW_LOOPBACK
#define mte_reg_base (0x4800*4+0x20000)
/* Iridia Registers Address Constants */
#define MTE_Reg(r) (int)(mte_reg_base + (r*4))
#define IT_AMODE MTE_Reg(0x0004)
#define TIMER_DELAY (1024)
#define BC0_BYTES (32)
#define BC1_BYTES (30)
#define NUM_MB (12)
#define TIMEOUT_VALUE 2000
static void
BFMWait (u32 cycle)
{
u32 i;
for (i = 0; i < cycle; i++);
}
static void
WriteRegLong (u32 addr, u32 data)
{
//*((volatile u32 *)(addr)) = data;
IFX_MEI_WRITE_REGISTER_L (data, addr);
}
static u32
ReadRegLong (u32 addr)
{
// u32 rd_val;
//rd_val = *((volatile u32 *)(addr));
// return rd_val;
return IFX_MEI_READ_REGISTER_L (addr);
}
/* This routine writes the mailbox with the data in an input array */
static void
WriteMbox (u32 * mboxarray, u32 size)
{
IFX_MEI_DebugWrite (&dsl_devices[0], IMBOX_BASE, mboxarray, size);
IFX_MEI_DMSG("write to %X\n", IMBOX_BASE);
IFX_MEI_LongWordWriteOffset (&dsl_devices[0], (u32) ME_ME2ARC_INT, MEI_TO_ARC_MSGAV);
}
/* This routine reads the output mailbox and places the results into an array */
static void
ReadMbox (u32 * mboxarray, u32 size)
{
IFX_MEI_DebugRead (&dsl_devices[0], OMBOX_BASE, mboxarray, size);
IFX_MEI_DMSG("read from %X\n", OMBOX_BASE);
}
static void
MEIWriteARCValue (u32 address, u32 value)
{
u32 i, check = 0;
/* Write address register */
IFX_MEI_WRITE_REGISTER_L (address, ME_DBG_WR_AD + LTQ_MEI_BASE_ADDR);
/* Write data register */
IFX_MEI_WRITE_REGISTER_L (value, ME_DBG_DATA + LTQ_MEI_BASE_ADDR);
/* wait until complete - timeout at 40 */
for (i = 0; i < 40; i++) {
check = IFX_MEI_READ_REGISTER_L (ME_ARC2ME_STAT + LTQ_MEI_BASE_ADDR);
if ((check & ARC_TO_MEI_DBG_DONE))
break;
}
/* clear the flag */
IFX_MEI_WRITE_REGISTER_L (ARC_TO_MEI_DBG_DONE, ME_ARC2ME_STAT + LTQ_MEI_BASE_ADDR);
}
void
arc_code_page_download (uint32_t arc_code_length, uint32_t * start_address)
{
int count;
IFX_MEI_DMSG("try to download pages,size=%d\n", arc_code_length);
IFX_MEI_ControlModeSet (&dsl_devices[0], MEI_MASTER_MODE);
IFX_MEI_HaltArc (&dsl_devices[0]);
IFX_MEI_LongWordWriteOffset (&dsl_devices[0], (u32) ME_DX_AD, 0);
for (count = 0; count < arc_code_length; count++) {
IFX_MEI_LongWordWriteOffset (&dsl_devices[0], (u32) ME_DX_DATA,
*(start_address + count));
}
IFX_MEI_ControlModeSet (&dsl_devices[0], JTAG_MASTER_MODE);
}
static int
load_jump_table (unsigned long addr)
{
int i;
uint32_t addr_le, addr_be;
uint32_t jump_table[32];
for (i = 0; i < 16; i++) {
addr_le = i * 8 + addr;
addr_be = ((addr_le >> 16) & 0xffff);
addr_be |= ((addr_le & 0xffff) << 16);
jump_table[i * 2 + 0] = 0x0f802020;
jump_table[i * 2 + 1] = addr_be;
//printk("jt %X %08X %08X\n",i,jump_table[i*2+0],jump_table[i*2+1]);
}
arc_code_page_download (32, &jump_table[0]);
return 0;
}
int got_int = 0;
void
dfe_loopback_irq_handler (DSL_DEV_Device_t *pDev)
{
uint32_t rd_mbox[10];
memset (&rd_mbox[0], 0, 10 * 4);
ReadMbox (&rd_mbox[0], 6);
if (rd_mbox[0] == 0x0) {
FX_MEI_DMSG("Get ARC_ACK\n");
got_int = 1;
}
else if (rd_mbox[0] == 0x5) {
IFX_MEI_DMSG("Get ARC_BUSY\n");
got_int = 2;
}
else if (rd_mbox[0] == 0x3) {
IFX_MEI_DMSG("Get ARC_EDONE\n");
if (rd_mbox[1] == 0x0) {
got_int = 3;
IFX_MEI_DMSG("Get E_MEMTEST\n");
if (rd_mbox[2] != 0x1) {
got_int = 4;
IFX_MEI_DMSG("Get Result %X\n", rd_mbox[2]);
}
}
}
IFX_MEI_LongWordWriteOffset (&dsl_devices[0], (u32) ME_ARC2ME_STAT,
ARC_TO_MEI_DBG_DONE);
MEI_MASK_AND_ACK_IRQ (pDev->nIrq[IFX_DFEIR]);
disable_irq (pDev->nIrq[IFX_DFEIR]);
//got_int = 1;
return;
}
static void
wait_mem_test_result (void)
{
uint32_t mbox[5];
mbox[0] = 0;
IFX_MEI_DMSG("Waiting Starting\n");
while (mbox[0] == 0) {
ReadMbox (&mbox[0], 5);
}
IFX_MEI_DMSG("Try to get mem test result.\n");
ReadMbox (&mbox[0], 5);
if (mbox[0] == 0xA) {
IFX_MEI_DMSG("Success.\n");
}
else if (mbox[0] == 0xA) {
IFX_MEI_EMSG("Fail,address %X,except data %X,receive data %X\n",
mbox[1], mbox[2], mbox[3]);
}
else {
IFX_MEI_EMSG("Fail\n");
}
}
static int
arc_ping_testing (DSL_DEV_Device_t *pDev)
{
#define MEI_PING 0x00000001
uint32_t wr_mbox[10], rd_mbox[10];
int i;
for (i = 0; i < 10; i++) {
wr_mbox[i] = 0;
rd_mbox[i] = 0;
}
FX_MEI_DMSG("send ping msg\n");
wr_mbox[0] = MEI_PING;
WriteMbox (&wr_mbox[0], 10);
while (got_int == 0) {
MEI_WAIT (100);
}
IFX_MEI_DMSG("send start event\n");
got_int = 0;
wr_mbox[0] = 0x4;
wr_mbox[1] = 0;
wr_mbox[2] = 0;
wr_mbox[3] = (uint32_t) 0xf5acc307e;
wr_mbox[4] = 5;
wr_mbox[5] = 2;
wr_mbox[6] = 0x1c000;
wr_mbox[7] = 64;
wr_mbox[8] = 0;
wr_mbox[9] = 0;
WriteMbox (&wr_mbox[0], 10);
DSL_ENABLE_IRQ (pDev->nIrq[IFX_DFEIR]);
//printk("IFX_MEI_MailboxWrite ret=%d\n",i);
IFX_MEI_LongWordWriteOffset (&dsl_devices[0],
(u32) ME_ME2ARC_INT,
MEI_TO_ARC_MSGAV);
IFX_MEI_DMSG("sleeping\n");
while (1) {
if (got_int > 0) {
if (got_int > 3)
IFX_MEI_DMSG("got_int >>>> 3\n");
else
IFX_MEI_DMSG("got int = %d\n", got_int);
got_int = 0;
//schedule();
DSL_ENABLE_IRQ (pDev->nIrq[IFX_DFEIR]);
}
//mbox_read(&rd_mbox[0],6);
MEI_WAIT (100);
}
return 0;
}
static DSL_DEV_MeiError_t
DFE_Loopback_Test (void)
{
int i = 0;
u32 arc_debug_data = 0, temp;
DSL_DEV_Device_t *pDev = &dsl_devices[0];
uint32_t wr_mbox[10];
IFX_MEI_ResetARC (pDev);
// start the clock
arc_debug_data = ACL_CLK_MODE_ENABLE;
IFX_MEI_DebugWrite (pDev, CRI_CCR0, &arc_debug_data, 1);
#if defined( DFE_PING_TEST )|| defined( DFE_ATM_LOOPBACK)
// WriteARCreg(AUX_XMEM_LTEST,0);
IFX_MEI_ControlModeSet (pDev, MEI_MASTER_MODE);
#define AUX_XMEM_LTEST 0x128
_IFX_MEI_DBGLongWordWrite (pDev, MEI_DEBUG_DEC_AUX_MASK, AUX_XMEM_LTEST, 0);
IFX_MEI_ControlModeSet (pDev, JTAG_MASTER_MODE);
// WriteARCreg(AUX_XDMA_GAP,0);
IFX_MEI_ControlModeSet (pDev, MEI_MASTER_MODE);
#define AUX_XDMA_GAP 0x114
_IFX_MEI_DBGLongWordWrite (pDev, MEI_DEBUG_DEC_AUX_MASK, AUX_XDMA_GAP, 0);
IFX_MEI_ControlModeSet (pDev, JTAG_MASTER_MODE);
IFX_MEI_ControlModeSet (pDev, MEI_MASTER_MODE);
temp = 0;
_IFX_MEI_DBGLongWordWrite (pDev, MEI_DEBUG_DEC_AUX_MASK,
(u32) ME_XDATA_BASE_SH + LTQ_MEI_BASE_ADDR, temp);
IFX_MEI_ControlModeSet (pDev, JTAG_MASTER_MODE);
i = IFX_MEI_DFEMemoryAlloc (pDev, SDRAM_SEGMENT_SIZE * 16);
if (i >= 0) {
int idx;
for (idx = 0; idx < i; idx++) {
DSL_DEV_PRIVATE(pDev)->adsl_mem_info[idx].type = FREE_RELOAD;
IFX_MEI_WRITE_REGISTER_L ((((uint32_t) DSL_DEV_PRIVATE(pDev)->adsl_mem_info[idx].address) & 0x0fffffff),
LTQ_MEI_BASE_ADDR + ME_XMEM_BAR_BASE + idx * 4);
IFX_MEI_DMSG("bar%d(%X)=%X\n", idx,
LTQ_MEI_BASE_ADDR + ME_XMEM_BAR_BASE +
idx * 4, (((uint32_t)
((ifx_mei_device_private_t *)
pDev->pPriv)->adsl_mem_info[idx].
address) & 0x0fffffff));
memset ((u8 *) DSL_DEV_PRIVATE(pDev)->adsl_mem_info[idx].address, 0, SDRAM_SEGMENT_SIZE);
}
IFX_MEI_LongWordWriteOffset (pDev, (u32) ME_XDATA_BASE_SH,
((unsigned long) DSL_DEV_PRIVATE(pDev)->adsl_mem_info[XDATA_REGISTER].address) & 0x0FFFFFFF);
}
else {
IFX_MEI_EMSG ("cannot load image: no memory\n");
return DSL_DEV_MEI_ERR_FAILURE;
}
//WriteARCreg(AUX_IC_CTRL,2);
IFX_MEI_DMSG("Setting MEI_MASTER_MODE..\n");
IFX_MEI_ControlModeSet (pDev, MEI_MASTER_MODE);
#define AUX_IC_CTRL 0x11
_IFX_MEI_DBGLongWordWrite (pDev, MEI_DEBUG_DEC_AUX_MASK,
AUX_IC_CTRL, 2);
IFX_MEI_DMSG("Setting JTAG_MASTER_MODE..\n");
IFX_MEI_ControlModeSet (pDev, JTAG_MASTER_MODE);
IFX_MEI_DMSG("Halting ARC...\n");
IFX_MEI_HaltArc (&dsl_devices[0]);
#ifdef DFE_PING_TEST
IFX_MEI_DMSG("ping test image size=%d\n", sizeof (arc_ahb_access_code));
memcpy ((u8 *) (DSL_DEV_PRIVATE(pDev)->
adsl_mem_info[0].address + 0x1004),
&arc_ahb_access_code[0], sizeof (arc_ahb_access_code));
load_jump_table (0x80000 + 0x1004);
#endif //DFE_PING_TEST
IFX_MEI_DMSG("ARC ping test code download complete\n");
#endif //defined( DFE_PING_TEST )|| defined( DFE_ATM_LOOPBACK)
#ifdef DFE_MEM_TEST
IFX_MEI_LongWordWriteOffset (&dsl_devices[0], (u32) ME_ARC2ME_MASK, MSGAV_EN);
arc_code_page_download (1537, &code_array[0]);
IFX_MEI_DMSG("ARC mem test code download complete\n");
#endif //DFE_MEM_TEST
#ifdef DFE_ATM_LOOPBACK
arc_debug_data = 0xf;
arc_code_page_download (sizeof(code_array) / sizeof(*code_array), &code_array[0]);
wr_mbox[0] = 0; //TIMER_DELAY - org: 1024
wr_mbox[1] = 0; //TXFB_START0
wr_mbox[2] = 0x7f; //TXFB_END0 - org: 49
wr_mbox[3] = 0x80; //TXFB_START1 - org: 80
wr_mbox[4] = 0xff; //TXFB_END1 - org: 109
wr_mbox[5] = 0x100; //RXFB_START0 - org: 0
wr_mbox[6] = 0x17f; //RXFB_END0 - org: 49
wr_mbox[7] = 0x180; //RXFB_START1 - org: 256
wr_mbox[8] = 0x1ff; //RXFB_END1 - org: 315
WriteMbox (&wr_mbox[0], 9);
// Start Iridia IT_AMODE (in dmp access) why is it required?
IFX_MEI_DebugWrite (&dsl_devices[0], 0x32010, &arc_debug_data, 1);
#endif //DFE_ATM_LOOPBACK
IFX_MEI_IRQEnable (pDev);
IFX_MEI_DMSG("run ARC...\n");
IFX_MEI_RunArc (&dsl_devices[0]);
#ifdef DFE_PING_TEST
arc_ping_testing (pDev);
#endif //DFE_PING_TEST
#ifdef DFE_MEM_TEST
wait_mem_test_result ();
#endif //DFE_MEM_TEST
IFX_MEI_DFEMemoryFree (pDev, FREE_ALL);
return DSL_DEV_MEI_ERR_SUCCESS;
}
#endif //CONFIG_AMAZON_S_MEI_FW_LOOPBACK
static int
IFX_MEI_InitDevNode (int num)
{
if (num == 0) {
if ((dev_major = register_chrdev (dev_major, IFX_MEI_DEVNAME, &bsp_mei_operations)) < 0) {
IFX_MEI_EMSG ("register_chrdev(%d %s) failed!\n", dev_major, IFX_MEI_DEVNAME);
return -ENODEV;
}
}
return 0;
}
static int
IFX_MEI_CleanUpDevNode (int num)
{
if (num == 0)
unregister_chrdev (dev_major, MEI_DIRNAME);
return 0;
}
static int
IFX_MEI_InitDevice (int num)
{
DSL_DEV_Device_t *pDev;
u32 temp;
pDev = &dsl_devices[num];
if (pDev == NULL)
return -ENOMEM;
pDev->pPriv = &sDanube_Mei_Private[num];
memset (pDev->pPriv, 0, sizeof (ifx_mei_device_private_t));
memset (&DSL_DEV_PRIVATE(pDev)->
adsl_mem_info[0], 0,
sizeof (smmu_mem_info_t) * MAX_BAR_REGISTERS);
if (num == 0) {
pDev->nIrq[IFX_DFEIR] = LTQ_MEI_INT;
pDev->nIrq[IFX_DYING_GASP] = LTQ_MEI_DYING_GASP_INT;
pDev->base_address = KSEG1 + LTQ_MEI_BASE_ADDR;
/* Power up MEI */
#ifdef CONFIG_LANTIQ_AMAZON_SE
*LTQ_PMU_PWDCR &= ~(1 << 9); // enable dsl
*LTQ_PMU_PWDCR &= ~(1 << 15); // enable AHB base
#endif
temp = ltq_r32(LTQ_PMU_PWDCR);
temp &= 0xffff7dbe;
ltq_w32(temp, LTQ_PMU_PWDCR);
}
pDev->nInUse = 0;
DSL_DEV_PRIVATE(pDev)->modem_ready = 0;
DSL_DEV_PRIVATE(pDev)->arcmsgav = 0;
MEI_INIT_WAKELIST ("arcq", DSL_DEV_PRIVATE(pDev)->wait_queue_arcmsgav); // for ARCMSGAV
MEI_INIT_WAKELIST ("arcr", DSL_DEV_PRIVATE(pDev)->wait_queue_modemready); // for arc modem ready
MEI_MUTEX_INIT (DSL_DEV_PRIVATE(pDev)->mei_cmv_sema, 1); // semaphore initialization, mutex
#if 0
MEI_MASK_AND_ACK_IRQ (pDev->nIrq[IFX_DFEIR]);
MEI_MASK_AND_ACK_IRQ (pDev->nIrq[IFX_DYING_GASP]);
#endif
if (request_irq (pDev->nIrq[IFX_DFEIR], IFX_MEI_IrqHandle, 0, "DFEIR", pDev) != 0) {
IFX_MEI_EMSG ("request_irq %d failed!\n", pDev->nIrq[IFX_DFEIR]);
return -1;
}
/*if (request_irq (pDev->nIrq[IFX_DYING_GASP], IFX_MEI_Dying_Gasp_IrqHandle, 0, "DYING_GASP", pDev) != 0) {
IFX_MEI_EMSG ("request_irq %d failed!\n", pDev->nIrq[IFX_DYING_GASP]);
return -1;
}*/
// IFX_MEI_DMSG("Device %d initialized. IER %#x\n", num, bsp_get_irq_ier(pDev->nIrq[IFX_DYING_GASP]));
return 0;
}
static int
IFX_MEI_ExitDevice (int num)
{
DSL_DEV_Device_t *pDev;
pDev = &dsl_devices[num];
if (pDev == NULL)
return -EIO;
disable_irq (pDev->nIrq[IFX_DFEIR]);
disable_irq (pDev->nIrq[IFX_DYING_GASP]);
free_irq(pDev->nIrq[IFX_DFEIR], pDev);
free_irq(pDev->nIrq[IFX_DYING_GASP], pDev);
return 0;
}
static DSL_DEV_Device_t *
IFX_BSP_HandleGet (int maj, int num)
{
if (num > BSP_MAX_DEVICES)
return NULL;
return &dsl_devices[num];
}
DSL_DEV_Device_t *
DSL_BSP_DriverHandleGet (int maj, int num)
{
DSL_DEV_Device_t *pDev;
if (num > BSP_MAX_DEVICES)
return NULL;
pDev = &dsl_devices[num];
if (!try_module_get(pDev->owner))
return NULL;
pDev->nInUse++;
return pDev;
}
int
DSL_BSP_DriverHandleDelete (DSL_DEV_Device_t * nHandle)
{
DSL_DEV_Device_t *pDev = (DSL_DEV_Device_t *) nHandle;
if (pDev->nInUse)
pDev->nInUse--;
module_put(pDev->owner);
return 0;
}
static int
IFX_MEI_Open (DSL_DRV_inode_t * ino, DSL_DRV_file_t * fil)
{
int maj = MAJOR (ino->i_rdev);
int num = MINOR (ino->i_rdev);
DSL_DEV_Device_t *pDev = NULL;
if ((pDev = DSL_BSP_DriverHandleGet (maj, num)) == NULL) {
IFX_MEI_EMSG("open(%d:%d) fail!\n", maj, num);
return -EIO;
}
fil->private_data = pDev;
return 0;
}
static int
IFX_MEI_Release (DSL_DRV_inode_t * ino, DSL_DRV_file_t * fil)
{
//int maj = MAJOR(ino->i_rdev);
int num = MINOR (ino->i_rdev);
DSL_DEV_Device_t *pDev;
pDev = &dsl_devices[num];
if (pDev == NULL)
return -EIO;
DSL_BSP_DriverHandleDelete (pDev);
return 0;
}
/**
* Callback function for linux userspace program writing
*/
static ssize_t
IFX_MEI_Write (DSL_DRV_file_t * filp, const char *buf, size_t size, loff_t * loff)
{
DSL_DEV_MeiError_t mei_error = DSL_DEV_MEI_ERR_FAILURE;
long offset = 0;
DSL_DEV_Device_t *pDev = (DSL_DEV_Device_t *) filp->private_data;
if (pDev == NULL)
return -EIO;
mei_error =
DSL_BSP_FWDownload (pDev, buf, size, (long *) loff, &offset);
if (mei_error == DSL_DEV_MEI_ERR_FAILURE)
return -EIO;
return (ssize_t) offset;
}
/**
* Callback function for linux userspace program ioctling
*/
static int
IFX_MEI_IoctlCopyFrom (int from_kernel, char *dest, char *from, int size)
{
int ret = 0;
if (!from_kernel)
ret = copy_from_user ((char *) dest, (char *) from, size);
else
ret = (int)memcpy ((char *) dest, (char *) from, size);
return ret;
}
static int
IFX_MEI_IoctlCopyTo (int from_kernel, char *dest, char *from, int size)
{
int ret = 0;
if (!from_kernel)
ret = copy_to_user ((char *) dest, (char *) from, size);
else
ret = (int)memcpy ((char *) dest, (char *) from, size);
return ret;
}
int
IFX_MEI_Ioctls (DSL_DEV_Device_t * pDev, int from_kernel, unsigned int command, unsigned long lon)
{
int i = 0;
int meierr = DSL_DEV_MEI_ERR_SUCCESS;
u32 base_address = LTQ_MEI_BASE_ADDR;
DSL_DEV_WinHost_Message_t winhost_msg, m;
// DSL_DEV_MeiDebug_t debugrdwr;
DSL_DEV_MeiReg_t regrdwr;
switch (command) {
case DSL_FIO_BSP_CMV_WINHOST:
IFX_MEI_IoctlCopyFrom (from_kernel, (char *) winhost_msg.msg.TxMessage,
(char *) lon, MSG_LENGTH * 2);
if ((meierr = DSL_BSP_SendCMV (pDev, winhost_msg.msg.TxMessage, YES_REPLY,
winhost_msg.msg.RxMessage)) != DSL_DEV_MEI_ERR_SUCCESS) {
IFX_MEI_EMSG ("WINHOST CMV fail :TxMessage:%X %X %X %X, RxMessage:%X %X %X %X %X\n",
winhost_msg.msg.TxMessage[0], winhost_msg.msg.TxMessage[1], winhost_msg.msg.TxMessage[2], winhost_msg.msg.TxMessage[3],
winhost_msg.msg.RxMessage[0], winhost_msg.msg.RxMessage[1], winhost_msg.msg.RxMessage[2], winhost_msg.msg.RxMessage[3],
winhost_msg.msg.RxMessage[4]);
meierr = DSL_DEV_MEI_ERR_FAILURE;
}
else {
IFX_MEI_IoctlCopyTo (from_kernel, (char *) lon,
(char *) winhost_msg.msg.RxMessage,
MSG_LENGTH * 2);
}
break;
case DSL_FIO_BSP_CMV_READ:
IFX_MEI_IoctlCopyFrom (from_kernel, (char *) (&regrdwr),
(char *) lon, sizeof (DSL_DEV_MeiReg_t));
IFX_MEI_LongWordRead ((u32) regrdwr.iAddress,
(u32 *) & (regrdwr.iData));
IFX_MEI_IoctlCopyTo (from_kernel, (char *) lon,
(char *) (&regrdwr),
sizeof (DSL_DEV_MeiReg_t));
break;
case DSL_FIO_BSP_CMV_WRITE:
IFX_MEI_IoctlCopyFrom (from_kernel, (char *) (&regrdwr),
(char *) lon, sizeof (DSL_DEV_MeiReg_t));
IFX_MEI_LongWordWrite ((u32) regrdwr.iAddress,
regrdwr.iData);
break;
case DSL_FIO_BSP_GET_BASE_ADDRESS:
IFX_MEI_IoctlCopyTo (from_kernel, (char *) lon,
(char *) (&base_address),
sizeof (base_address));
break;
case DSL_FIO_BSP_IS_MODEM_READY:
i = IFX_MEI_IsModemReady (pDev);
IFX_MEI_IoctlCopyTo (from_kernel, (char *) lon,
(char *) (&i), sizeof (int));
meierr = DSL_DEV_MEI_ERR_SUCCESS;
break;
case DSL_FIO_BSP_RESET:
case DSL_FIO_BSP_REBOOT:
meierr = IFX_MEI_CpuModeSet (pDev, DSL_CPU_RESET);
meierr = IFX_MEI_CpuModeSet (pDev, DSL_CPU_HALT);
break;
case DSL_FIO_BSP_HALT:
meierr = IFX_MEI_CpuModeSet (pDev, DSL_CPU_HALT);
break;
case DSL_FIO_BSP_RUN:
meierr = IFX_MEI_CpuModeSet (pDev, DSL_CPU_RUN);
break;
case DSL_FIO_BSP_BOOTDOWNLOAD:
meierr = IFX_MEI_DownloadBootCode (pDev);
break;
case DSL_FIO_BSP_JTAG_ENABLE:
meierr = IFX_MEI_ArcJtagEnable (pDev, 1);
break;
case DSL_FIO_BSP_REMOTE:
IFX_MEI_IoctlCopyFrom (from_kernel, (char *) (&i),
(char *) lon, sizeof (int));
meierr = IFX_MEI_AdslMailboxIRQEnable (pDev, i);
break;
case DSL_FIO_BSP_DSL_START:
IFX_MEI_DMSG("DSL_FIO_BSP_DSL_START\n");
if ((meierr = IFX_MEI_RunAdslModem (pDev)) != DSL_DEV_MEI_ERR_SUCCESS) {
IFX_MEI_EMSG ("IFX_MEI_RunAdslModem() error...");
meierr = DSL_DEV_MEI_ERR_FAILURE;
}
break;
/* case DSL_FIO_BSP_DEBUG_READ:
case DSL_FIO_BSP_DEBUG_WRITE:
IFX_MEI_IoctlCopyFrom (from_kernel,
(char *) (&debugrdwr),
(char *) lon,
sizeof (debugrdwr));
if (command == DSL_FIO_BSP_DEBUG_READ)
meierr = DSL_BSP_MemoryDebugAccess (pDev,
DSL_BSP_MEMORY_READ,
debugrdwr.
iAddress,
debugrdwr.
buffer,
debugrdwr.
iCount);
else
meierr = DSL_BSP_MemoryDebugAccess (pDev,
DSL_BSP_MEMORY_WRITE,
debugrdwr.
iAddress,
debugrdwr.
buffer,
debugrdwr.
iCount);
IFX_MEI_IoctlCopyTo (from_kernel, (char *) lon, (char *) (&debugrdwr), sizeof (debugrdwr));
break;*/
case DSL_FIO_BSP_GET_VERSION:
IFX_MEI_IoctlCopyTo (from_kernel, (char *) lon, (char *) (&bsp_mei_version), sizeof (DSL_DEV_Version_t));
break;
#define LTQ_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
case DSL_FIO_BSP_GET_CHIP_INFO:
bsp_chip_info.major = 1;
bsp_chip_info.minor = LTQ_MPS_CHIPID_VERSION_GET(*LTQ_MPS_CHIPID);
IFX_MEI_IoctlCopyTo (from_kernel, (char *) lon, (char *) (&bsp_chip_info), sizeof (DSL_DEV_HwVersion_t));
meierr = DSL_DEV_MEI_ERR_SUCCESS;
break;
case DSL_FIO_BSP_FREE_RESOURCE:
makeCMV (H2D_CMV_READ, DSL_CMV_GROUP_STAT, 4, 0, 1, NULL, m.msg.TxMessage);
if (DSL_BSP_SendCMV (pDev, m.msg.TxMessage, YES_REPLY, m.msg.RxMessage) != DSL_DEV_MEI_ERR_SUCCESS) {
meierr = DSL_DEV_MEI_ERR_FAILURE;
return -EIO;
}
IFX_MEI_DMSG("RxMessage[4] = %#x\n", m.msg.RxMessage[4]);
if (!(m.msg.RxMessage[4] & DSL_DEV_STAT_CODESWAP_COMPLETE)) {
meierr = DSL_DEV_MEI_ERR_FAILURE;
return -EAGAIN;
}
IFX_MEI_DMSG("Freeing all memories marked FREE_SHOWTIME\n");
IFX_MEI_DFEMemoryFree (pDev, FREE_SHOWTIME);
meierr = DSL_DEV_MEI_ERR_SUCCESS;
break;
#ifdef CONFIG_IFXMIPS_AMAZON_SE
case DSL_FIO_ARC_MUX_TEST:
AMAZON_SE_MEI_ARC_MUX_Test();
break;
#endif
default:
// IFX_MEI_EMSG("Invalid IOCTL command: %d\n");
break;
}
return meierr;
}
#ifdef CONFIG_IFXMIPS_AMAZON_SE
void AMAZON_SE_MEI_ARC_MUX_Test(void)
{
u32 *p, i;
*LTQ_RCU_RST |= LTQ_RCU_RST_REQ_MUX_ARC;
p = (u32*)(DFE_LDST_BASE_ADDR + IRAM0_BASE);
IFX_MEI_EMSG("Writing to IRAM0(%p)...\n", p);
for (i = 0; i < IRAM0_SIZE/sizeof(u32); i++, p++) {
*p = 0xdeadbeef;
if (*p != 0xdeadbeef)
IFX_MEI_EMSG("%p: %#x\n", p, *p);
}
p = (u32*)(DFE_LDST_BASE_ADDR + IRAM1_BASE);
IFX_MEI_EMSG("Writing to IRAM1(%p)...\n", p);
for (i = 0; i < IRAM1_SIZE/sizeof(u32); i++, p++) {
*p = 0xdeadbeef;
if (*p != 0xdeadbeef)
IFX_MEI_EMSG("%p: %#x\n", p, *p);
}
p = (u32*)(DFE_LDST_BASE_ADDR + BRAM_BASE);
IFX_MEI_EMSG("Writing to BRAM(%p)...\n", p);
for (i = 0; i < BRAM_SIZE/sizeof(u32); i++, p++) {
*p = 0xdeadbeef;
if (*p != 0xdeadbeef)
IFX_MEI_EMSG("%p: %#x\n", p, *p);
}
p = (u32*)(DFE_LDST_BASE_ADDR + XRAM_BASE);
IFX_MEI_EMSG("Writing to XRAM(%p)...\n", p);
for (i = 0; i < XRAM_SIZE/sizeof(u32); i++, p++) {
*p = 0xdeadbeef;
if (*p != 0xdeadbeef)
IFX_MEI_EMSG("%p: %#x\n", p, *p);
}
p = (u32*)(DFE_LDST_BASE_ADDR + YRAM_BASE);
IFX_MEI_EMSG("Writing to YRAM(%p)...\n", p);
for (i = 0; i < YRAM_SIZE/sizeof(u32); i++, p++) {
*p = 0xdeadbeef;
if (*p != 0xdeadbeef)
IFX_MEI_EMSG("%p: %#x\n", p, *p);
}
p = (u32*)(DFE_LDST_BASE_ADDR + EXT_MEM_BASE);
IFX_MEI_EMSG("Writing to EXT_MEM(%p)...\n", p);
for (i = 0; i < EXT_MEM_SIZE/sizeof(u32); i++, p++) {
*p = 0xdeadbeef;
if (*p != 0xdeadbeef)
IFX_MEI_EMSG("%p: %#x\n", p, *p);
}
*LTQ_RCU_RST &= ~LTQ_RCU_RST_REQ_MUX_ARC;
}
#endif
int
DSL_BSP_KernelIoctls (DSL_DEV_Device_t * pDev, unsigned int command,
unsigned long lon)
{
int error = 0;
error = IFX_MEI_Ioctls (pDev, 1, command, lon);
return error;
}
static long
IFX_MEI_UserIoctls (DSL_DRV_file_t * fil,
unsigned int command, unsigned long lon)
{
int error = 0;
DSL_DEV_Device_t *pDev;
pDev = IFX_BSP_HandleGet (0, 0);
if (pDev == NULL)
return -EIO;
error = IFX_MEI_Ioctls (pDev, 0, command, lon);
return error;
}
static int adsl_dummy_ledcallback(void)
{
return 0;
}
int ifx_mei_atm_led_blink(void)
{
return g_adsl_ledcallback();
}
EXPORT_SYMBOL(ifx_mei_atm_led_blink);
int ifx_mei_atm_showtime_check(int *is_showtime, struct port_cell_info *port_cell, void **xdata_addr)
{
int i;
if ( is_showtime ) {
*is_showtime = g_tx_link_rate[0] == 0 && g_tx_link_rate[1] == 0 ? 0 : 1;
}
if ( port_cell ) {
for ( i = 0; i < port_cell->port_num && i < 2; i++ )
port_cell->tx_link_rate[i] = g_tx_link_rate[i];
}
if ( xdata_addr ) {
if ( g_tx_link_rate[0] == 0 && g_tx_link_rate[1] == 0 )
*xdata_addr = NULL;
else
*xdata_addr = g_xdata_addr;
}
return 0;
}
EXPORT_SYMBOL(ifx_mei_atm_showtime_check);
/*
* Writing function for linux proc filesystem
*/
static int ltq_mei_probe(struct platform_device *pdev)
{
int i = 0;
static struct class *dsl_class;
pr_info("IFX MEI Version %ld.%02ld.%02ld\n", bsp_mei_version.major, bsp_mei_version.minor, bsp_mei_version.revision);
for (i = 0; i < BSP_MAX_DEVICES; i++) {
if (IFX_MEI_InitDevice (i) != 0) {
IFX_MEI_EMSG("Init device fail!\n");
return -EIO;
}
IFX_MEI_InitDevNode (i);
}
for (i = 0; i <= DSL_BSP_CB_LAST ; i++)
dsl_bsp_event_callback[i].function = NULL;
#ifdef CONFIG_LTQ_MEI_FW_LOOPBACK
IFX_MEI_DMSG("Start loopback test...\n");
DFE_Loopback_Test ();
#endif
dsl_class = class_create(THIS_MODULE, "ifx_mei");
device_create(dsl_class, NULL, MKDEV(MEI_MAJOR, 0), NULL, "ifx_mei");
return 0;
}
static int ltq_mei_remove(struct platform_device *pdev)
{
int i = 0;
int num;
for (num = 0; num < BSP_MAX_DEVICES; num++) {
IFX_MEI_CleanUpDevNode (num);
}
for (i = 0; i < BSP_MAX_DEVICES; i++) {
for (i = 0; i < BSP_MAX_DEVICES; i++) {
IFX_MEI_ExitDevice (i);
}
}
return 0;
}
static const struct of_device_id ltq_mei_match[] = {
{ .compatible = "lantiq,mei-xway"},
{},
};
static struct platform_driver ltq_mei_driver = {
.probe = ltq_mei_probe,
.remove = ltq_mei_remove,
.driver = {
.name = "lantiq,mei-xway",
.owner = THIS_MODULE,
.of_match_table = ltq_mei_match,
},
};
module_platform_driver(ltq_mei_driver);
/* export function for DSL Driver */
/* The functions of MEI_DriverHandleGet and MEI_DriverHandleDelete are
something like open/close in kernel space , where the open could be used
to register a callback for autonomous messages and returns a mei driver context pointer (comparable to the file descriptor in user space)
The context will be required for the multi line chips future! */
EXPORT_SYMBOL (DSL_BSP_DriverHandleGet);
EXPORT_SYMBOL (DSL_BSP_DriverHandleDelete);
EXPORT_SYMBOL (DSL_BSP_ATMLedCBRegister);
EXPORT_SYMBOL (DSL_BSP_ATMLedCBUnregister);
EXPORT_SYMBOL (DSL_BSP_KernelIoctls);
EXPORT_SYMBOL (DSL_BSP_AdslLedInit);
//EXPORT_SYMBOL (DSL_BSP_AdslLedSet);
EXPORT_SYMBOL (DSL_BSP_FWDownload);
EXPORT_SYMBOL (DSL_BSP_Showtime);
EXPORT_SYMBOL (DSL_BSP_MemoryDebugAccess);
EXPORT_SYMBOL (DSL_BSP_SendCMV);
// provide a register/unregister function for DSL driver to register a event callback function
EXPORT_SYMBOL (DSL_BSP_EventCBRegister);
EXPORT_SYMBOL (DSL_BSP_EventCBUnregister);
MODULE_LICENSE("Dual BSD/GPL");
Reference in a new issue View git blame Copy permalink