openwrtv4/target/linux/brcm63xx/patches-3.10/510-board_spw303v.patch
Jonas Gorski 66ec204935 brcm63xx: set usb host port number for some devices
Update a few devices with their actual port numbers, especially those
with two ports.

Should allow properly using the second port on the Neufboxen and HW553
and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39325
2014-01-19 13:46:25 +00:00

83 lines
1.5 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1893,6 +1893,72 @@ static struct board_info __initdata boar
},
},
};
+
+ /* T-Home Speedport W 303V Typ B */
+static struct board_info __initdata board_spw303v = {
+ .name = "96358-502V",
+ .expected_cpu_id = 0x6358,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .leds = {
+ {
+ .name = "spw303v:green:power+adsl",
+ .gpio = 22,
+ .active_low = 1,
+ },
+ {
+ .name = "spw303v:red:power+adsl",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "spw303v:green:ppp",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "spw303v:green:ses",
+ .gpio = 0,
+ .active_low = 1,
+ },
+ {
+ .name = "spw303v:green:voip",
+ .gpio = 27,
+ .active_low = 1,
+ },
+ {
+ .name = "spw303v:green:pots",
+ .gpio = 31,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 11,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "ses",
+ .gpio = 37,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ }
+};
#endif
/*
@@ -1943,6 +2009,7 @@ static const struct board_info __initcon
&board_nb4_fxc_r1,
&board_nb4_fxc_r2,
&board_HW553,
+ &board_spw303v,
#endif
};