openwrtv4/target/linux/ramips/dts/ArcherC50.dts
Thibaut VARENE 370aacf532 ramips: ArcherC50v1: fix wlan2g MAC address
By default the wlan eprom contains the generic ralink MAC which is not
the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses
are decremented from the ethernet MAC.

This patch fixes the MAC address for wlan2g in line with OFW.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-08-06 09:22:03 +02:00

190 lines
2.9 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "tplink,c50", "ralink,mt7620a-soc";
model = "TP-Link Archer C50";
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
lan {
label = "c50:green:lan";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
power {
label = "c50:green:power";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
usb {
label = "c50:green:usb";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wan {
label = "c50:green:wan";
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
wan_orange {
label = "c50:orange:wan";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "c50:green:wlan5g";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "c50:green:wlan2g";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
wps {
label = "c50:green:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
}; };
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7a0000>;
};
partition@7c0000 {
label = "config";
reg = <0x7c0000 0x10000>;
read-only;
};
rom: partition@7d0000 {
label = "rom";
reg = <0x7d0000 0x10000>;
read-only;
};
partition@7e0000 {
label = "romfile";
reg = <0x7e0000 0x10000>;
read-only;
};
radio: partition@7f0000 {
label = "radio";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
ralink,function = "gpio";
};
pa {
ralink,group = "pa";
ralink,function = "pa";
};
};
};
&ethernet {
pinctrl-names = "default";
mtd-mac-address = <&rom 0xf100>;
mediatek,portmap = "wllll";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&gsw {
mediatek,port4 = "ephy";
};
&wmac {
ralink,mtd-eeprom = <&radio 0>;
mtd-mac-address = <&rom 0xf100>;
mtd-mac-address-increment = <(-2)>;
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&radio 32768>;
ieee80211-freq-limit = <5000000 6000000>;
mtd-mac-address = <&rom 0xf100>;
mtd-mac-address-increment = <(-1)>;
};
};
};