openwrtv4/package/boot/uboot-lantiq/patches/0017-tools-add-some-helper-tools-for-Lantiq-SoCs.patch
John Crispin 1246dce0b3 uboot-lantiq: update to v2013.10
Patches created from tree:
git@github.com:danielschwierzeck/u-boot-lantiq.git
v2013.10..u-boot-lantiq-v2013.10-openwrt4

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40482
2014-04-12 21:21:14 +00:00

492 lines
12 KiB
Diff

From 1da5479d59b39d7931a2b0efabdfa314f6788b6d Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
Date: Sat, 2 Mar 2013 23:34:00 +0100
Subject: tools: add some helper tools for Lantiq SoCs
Signed-off-by: Luka Perkov Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
diff --git a/tools/gct.pl b/tools/gct.pl
new file mode 100755
index 0000000..33fa6f7
--- /dev/null
+++ b/tools/gct.pl
@@ -0,0 +1,155 @@
+#!/usr/bin/perl
+
+#use strict;
+#use Cwd;
+#use Env;
+
+my $aline;
+my $lineid;
+my $length;
+my $address;
+my @bytes;
+my $addstr;
+my $chsum=0;
+my $count=0;
+my $firstime=1;
+my $i;
+my $currentaddr;
+my $tmp;
+my $holder="";
+my $loadaddr;
+
+if(@ARGV < 2){
+ die("\n Syntax: perl gct.pl uart_ddr_settings.conf u-boot.srec u-boot.asc\n");
+}
+
+open(IN_UART_DDR_SETTINGS, "<$ARGV[0]") || die("failed to open uart_ddr_settings.conf\n");
+open(IN_UART_SREC, "<$ARGV[1]") || die("failed to open u-boot.srec\n");
+open(OUT_UBOOT_ASC, ">$ARGV[2]") || die("failed to open u-boot.asc\n");
+
+$i=0;
+while ($line = <IN_UART_DDR_SETTINGS>){
+ if($line=~/\w/){
+ if($line!~/[;#\*]/){
+ if($i eq 0){
+ printf OUT_UBOOT_ASC ("33333333");
+ }
+ chomp($line);
+ $line=~s/\t//;
+ @array=split(/ +/,$line);
+ $j=0;
+ while(@array[$j]!~/\w/){
+ $j=$j+1;
+ }
+ $addr=@array[$j];
+ $regval=@array[$j+1];
+ $addr=~s/0x//;
+ $regval=~s/0x//;
+ printf OUT_UBOOT_ASC ("%08x%08x",hex($addr),hex($regval));
+ $i=$i+1;
+ if($i eq 8){
+ $i=0;
+ printf OUT_UBOOT_ASC ("\n");
+ }
+ }
+ }
+}
+
+while($i lt 8 && $i gt 0){
+ printf OUT_UBOOT_ASC "00"x8;
+ $i=$i+1;
+}
+
+if($i eq 8){
+ printf OUT_UBOOT_ASC ("\n");
+}
+
+while($aline=<IN_UART_SREC>){
+ $aline=uc($aline);
+ chomp($aline);
+ next if(($aline=~/^S0/) || ($aline=~/^S7/));
+ ($lineid, $length, $address, @bytes) = unpack"A2A2A8"."A2"x300, $aline;
+ $length = hex($length);
+ $address = hex($address);
+ $length -=5;
+ $i=0;
+
+ while($length>0){
+ if($firstime==1){
+ $addstr = sprintf("%x", $address);
+ $addstr = "0"x(8-length($addstr)).$addstr;
+ print OUT_UBOOT_ASC $addstr;
+ addchsum($addstr);
+ $firstime=0;
+ $currentaddr=$address;
+ $loadaddr = $addstr;
+ }
+ else{
+ if($count==64){
+ $addstr = sprintf("%x", $currentaddr);
+ $addstr = "0"x(8-length($addstr)).$addstr;
+ print OUT_UBOOT_ASC $addstr;
+ addchsum($addstr);
+ $count=0;
+ }
+#printf("*** %x != %x\n", $address, $currentaddr) if $address != $currentaddr;
+ }
+ if($currentaddr < $address) {
+ print OUT_UBOOT_ASC "00";
+ addchsum("00");
+ $count++;
+ $currentaddr++;
+ }
+ else {
+ while($count<64){
+ $bytes[$i]=~tr/ABCDEF/abcdef/;
+ print OUT_UBOOT_ASC "$bytes[$i]";
+ addchsum($bytes[$i]);
+ $i++;
+ $count++;
+ $currentaddr++;
+ $length--;
+ last if($length==0);
+ }
+ }
+ if($count==64){
+ print OUT_UBOOT_ASC "\n";
+ }
+ }
+}
+if($count != 64){
+ $tmp = "00";
+ for($i=0;$i<(64-$count);$i++){
+ print OUT_UBOOT_ASC "00";
+ addchsum($tmp);
+ }
+ print OUT_UBOOT_ASC "\n";
+}
+
+
+print OUT_UBOOT_ASC "11"x4;
+use integer;
+$chsum=$chsum & 0xffffffff;
+$chsum = sprintf("%X", $chsum);
+$chsum = "0"x(8-length($chsum)).$chsum;
+$chsum =~tr/ABCDEF/abcdef/;
+print OUT_UBOOT_ASC $chsum;
+print OUT_UBOOT_ASC "00"x60;
+print OUT_UBOOT_ASC "\n";
+
+print OUT_UBOOT_ASC "99"x4;
+print OUT_UBOOT_ASC $loadaddr;
+print OUT_UBOOT_ASC "00"x60;
+print OUT_UBOOT_ASC "\n";
+
+close OUT_UBOOT_ASC;
+
+sub addchsum{
+ my $cc=$_[0];
+ $holder=$holder.$cc;
+ if(length($holder)==8){
+ $holder = hex($holder);
+ $chsum+=$holder;
+ $holder="";
+ }
+}
diff --git a/tools/lantiq_bdi_conf.awk b/tools/lantiq_bdi_conf.awk
new file mode 100755
index 0000000..c732289
--- /dev/null
+++ b/tools/lantiq_bdi_conf.awk
@@ -0,0 +1,116 @@
+#!/usr/bin/awk -f
+#
+# Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
+# Copyright (C) 2013 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#
+# Usage:
+# awk -f lantiq_bdi_conf.awk -v soc=ar9 board=<name> PATH_TO_BOARD/ddr_settings.h
+#
+# Additional information:
+# http://www.abatron.ch/fileadmin/user_upload/products/pdf/ManGDBR4K-3000.pdf
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+function print_header()
+{
+ print "; "
+ print "; Copyright (C) 2013 Luka Perkov <luka@openwrt.org> "
+ print "; Copyright (C) 2013 Daniel Schwierzeck <daniel.schwierzeck@gmail.com> "
+ print "; "
+ print "; This file has been generated with lantiq_bdi_conf.awk script. "
+ print "; "
+ print "; SPDX-License-Identifier: GPL-2.0+ "
+ print "; "
+ print ""
+}
+
+function init_ar9_prologue()
+{
+ print "WM32 0xBF103010 0x80 ; CGU for CPU 333Mhz, DDR 167Mhz"
+ print "WM32 0xBF103014 0x01 ; CGU update"
+ print "WM32 0xBF800010 0x0 ; Clear error access log register"
+ print "WM32 0xBF800020 0x0 ; Clear error access log register"
+ print "WM32 0xBF800060 0xD ; Enable FPI, DDR and SRAM module in memory controller"
+ print "WM32 0xBF801030 0x0 ; Clear start bit of DDR memory controller"
+}
+
+function init_ar9_epilogue()
+{
+ print "WM32 0xBE105360 0x4001D7FF ; EBU setup"
+}
+
+function init_ddr1_epilogue()
+{
+ print "WM32 0xBF801030 0x100 ; Set start bit of DDR memory controller"
+}
+
+function ar9_target()
+{
+ print "CPUTYPE M34K"
+ print "ENDIAN BIG"
+ print "JTAGCLOCK 1"
+ print "BDIMODE AGENT ; [ LOADONLY, AGENT ]"
+ print "RESET JTAG ; [ NONE, JTAG, HARD ]"
+ print "POWERUP 100"
+ print "WAKEUP 100"
+ print "BREAKMODE HARD ; [ SOFT, HARD ]"
+ print "STEPMODE SWBP ; [ JTAG, HWBP, SWBP ]"
+ print "VECTOR CATCH"
+ print "SCANSUCC 1 5"
+}
+
+function flash_p2601hnfx()
+{
+ print "CHIPTYPE MIRRORX16"
+ print "CHIPSIZE 0x1000000"
+ print "BUSWIDTH 16"
+}
+
+BEGIN {
+ switch (soc) {
+ case "ar9":
+ reg_base = 0xbf801000
+ print_header()
+ print "[INIT]"
+ init_ar9_prologue()
+ break
+ default:
+ print "Invalid or no value for SoC specified!"
+ exit 1
+ }
+}
+
+/^#define/ {
+ /* DC03 contains MC enable bit and must not be set here */
+ if (tolower($2) != "mc_dc03_value")
+ printf("WM32 0x%x %s\n", reg_base, tolower($3))
+
+ reg_base += 0x10
+}
+
+END {
+ switch (soc) {
+ case "ar9":
+ init_ddr1_epilogue()
+ init_ar9_epilogue()
+ print ""
+ print "[TARGET]"
+ ar9_target()
+ print ""
+ print "[HOST]"
+ print "PROMPT \"ar9> \""
+ print ""
+ break
+ default:
+ }
+
+ switch (board) {
+ case "p2601hnfx":
+ print "[FLASH]"
+ flash_p2601hnfx()
+ print ""
+ break
+ default:
+ }
+}
diff --git a/tools/lantiq_ram_extract_magic.awk b/tools/lantiq_ram_extract_magic.awk
new file mode 100755
index 0000000..64f1cbc
--- /dev/null
+++ b/tools/lantiq_ram_extract_magic.awk
@@ -0,0 +1,69 @@
+#
+# Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org>
+#
+# Usage:
+# mips-openwrt-linux-objdump -EB -b binary -m mips:isa32r2 -D YOUR_IMAGE_DUMP | awk -f lantiq_ram_extract_magic.awk
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+BEGIN {
+ print "/* "
+ print " * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org> "
+ print " * "
+ print " * This file has been generated with lantiq_ram_extract_magic.awk script. "
+ print " * "
+ print " * SPDX-License-Identifier: GPL-2.0+ "
+ print " */ "
+ print ""
+
+ mc_dc_value=0
+ mc_dc_number=0
+ right_section=0
+ mc_dc_value_print=0
+ mc_dc_number_print=0
+}
+
+/t2,[0-9]+$/ {
+ if (right_section) {
+ split($4, tmp, ",")
+ mc_dc_value=sprintf("%X", tmp[2])
+ mc_dc_value_print=1
+ }
+}
+
+/t2,0x[0-9a-f]+$/ {
+ if (right_section) {
+ split($4, tmp, ",0x")
+ mc_dc_value=sprintf("%s", tmp[2])
+ mc_dc_value=toupper(mc_dc_value)
+ mc_dc_value_print=1
+ }
+}
+
+/t2,[0-9]+\(t1\)$/ {
+ if (right_section) {
+ split($4, tmp, ",")
+ split(tmp[2], tmp, "(")
+ mc_dc_number=tmp[1]/16
+ mc_dc_number_print=1
+ }
+}
+
+{
+ if (right_section && mc_dc_number_print && mc_dc_value_print) {
+ if (mc_dc_number < 10)
+ print "#define MC_DC0" mc_dc_number "_VALUE\t0x" mc_dc_value
+ else
+ print "#define MC_DC" mc_dc_number "_VALUE\t0x" mc_dc_value
+ mc_dc_value_print=0
+ mc_dc_number_print=0
+ }
+
+ if ($4 == "t1,t1,0x1000")
+ right_section=1
+
+
+ if ($4 == "t2,736(t1)")
+ right_section=0
+}
diff --git a/tools/lantiq_ram_init_uart.awk b/tools/lantiq_ram_init_uart.awk
new file mode 100755
index 0000000..dc82645
--- /dev/null
+++ b/tools/lantiq_ram_init_uart.awk
@@ -0,0 +1,117 @@
+#!/usr/bin/awk -f
+#
+# Copyright (C) 2011-2012 Luka Perkov <luka@openwrt.org>
+# Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#
+# Usage:
+# awk -f lantiq_ram_init_uart.awk -v soc=<danube|ar9|vr9> PATH_TO_BOARD/ddr_settings.h
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+function print_header()
+{
+ print "; "
+ print "; Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org> "
+ print "; Copyright (C) 2012-2013 Daniel Schwierzeck <daniel.schwierzeck@gmail.com> "
+ print "; "
+ print "; This file has been generated with lantiq_ram_init_uart.awk script. "
+ print "; "
+ print "; SPDX-License-Identifier: GPL-2.0+ "
+ print ""
+}
+
+function mc_danube_prologue()
+{
+ /* Clear access error log registers */
+ print "0xbf800010", "0x0"
+ print "0xbf800020", "0x0"
+
+ /* Enable DDR and SRAM module in memory controller */
+ print "0xbf800060", "0x5"
+
+ /* Clear start bit of DDR memory controller */
+ print "0xbf801030", "0x0"
+}
+
+function mc_ar9_prologue()
+{
+ /* Clear access error log registers */
+ print "0xbf800010", "0x0"
+ print "0xbf800020", "0x0"
+
+ /* Enable FPI, DDR and SRAM module in memory controller */
+ print "0xbf800060", "0xD"
+
+ /* Clear start bit of DDR memory controller */
+ print "0xbf801030", "0x0"
+}
+
+function mc_ddr1_epilogue()
+{
+ /* Set start bit of DDR memory controller */
+ print "0xbf801030", "0x100"
+}
+
+function mc_ddr2_prologue()
+{
+ /* Put memory controller in inactive mode */
+ print "0xbf401070", "0x0"
+}
+
+function mc_ddr2_epilogue(mc_ccr07_value)
+{
+ /* Put memory controller in active mode */
+ mc_ccr07_value = or(mc_ccr07_value, 0x100)
+ printf("0xbf401070 0x%x\n", mc_ccr07_value)
+}
+
+BEGIN {
+ switch (soc) {
+ case "danube":
+ reg_base = 0xbf801000
+ print_header()
+ mc_danube_prologue()
+ break
+ case "ar9":
+ reg_base = 0xbf801000
+ print_header()
+ mc_ar9_prologue()
+ break
+ case "vr9":
+ reg_base = 0xbf401000
+ print_header()
+ mc_ddr2_prologue()
+ break
+ default:
+ print "Invalid or no value for soc specified!"
+ exit 1
+ }
+
+ mc_ccr07_value = 0
+}
+
+/^#define/ {
+ /* CCR07 contains MC enable bit and must not be set here */
+ if (tolower($2) == "mc_ccr07_value")
+ mc_ccr07_value = strtonum($3)
+ if (tolower($2) == "mc_dc03_value")
+ /* CCR07 contains MC enable bit and must not be set here */
+ else
+ printf("0x%x %s\n", reg_base, tolower($3))
+
+ reg_base += 0x10
+}
+
+END {
+ switch (soc) {
+ case "danube":
+ case "ar9":
+ mc_ddr1_epilogue()
+ break
+ case "vr9":
+ mc_ddr2_epilogue(mc_ccr07_value)
+ break
+ default:
+ }
+}
--
1.8.3.2