openwrtv4/target/linux/brcm63xx/patches-3.10/529-board_fast2604.patch
Jonas Gorski 66ec204935 brcm63xx: set usb host port number for some devices
Update a few devices with their actual port numbers, especially those
with two ports.

Should allow properly using the second port on the Neufboxen and HW553
and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39325
2014-01-19 13:46:25 +00:00

68 lines
1.4 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1066,6 +1066,57 @@ static struct board_info __initdata boar
.has_ehci0 = 1,
};
+static struct board_info __initdata board_FAST2604 = {
+ .name = "F@ST2604",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "F@ST2604:green:power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "F@ST2604:red:power",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2604:red:inet",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2604:green:wps",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ },
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 33,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
static struct board_info __initdata board_rta1025w_16 = {
.name = "RTA1025W_16",
.expected_cpu_id = 0x6348,
@@ -2946,6 +2997,7 @@ static const struct board_info __initcon
&board_96348gw_10,
&board_96348gw_11,
&board_FAST2404,
+ &board_FAST2604,
&board_DV201AMR,
&board_96348gw_a,
&board_rta1025w_16,