openwrtv4/target/linux/ramips/dts/U7628-01.dtsi
Chuanhong Guo c9c4b2116c ramips: Use dts alias based status led
Also fix several typos in led node name.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-07-16 15:12:18 +02:00

136 lines
3.3 KiB
Text

/*
* BSD LICENSE
*
* Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
* Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "unielec,u7628-01", "mediatek,mt7628an-soc";
aliases {
led-status = &led_power;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_power: power {
label = "u7628-01:green:power";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
wlan {
label = "u7628-01:green:wlan";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wan {
label = "u7628-01:green:wan";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "u7628-01:green:lan1";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "u7628-01:green:lan2";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "u7628-01:green:lan3";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "u7628-01:green:lan4";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
usb {
label = "u7628-01:green:usb";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&pcie {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x0>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "wdt", "wled_an";
ralink,function = "gpio";
};
};
};